3M™ Three-Wall Condo Header .100 × .100 Right Angle 3000 Series • Stacked pins conserve space on the circuit board allowing higher density packaging • Pin quantity to 128 gives design flexibility with latching • “HDI’’ alternative • Three-wall fits in VME board stacking criteria • Accepts standard IDC sockets • Mates with standard flat cable harnesses • Optional high temperature insulator suitable for “no lead” soldering operations • High temperature option suitable for reflow soldering using “paste in hole” techniques • RoHS Compliant. See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: April 3, 2013 TS-0773-G Sheet 1 of 3 Physical Insulation: Material: Glass Filled Polyester (PBT), Glass Filled Polyester (PCT) - High Temp Option Flammability: UL 94V-0 Color: Gray (PBT), Black (PCT) Contact: Material: Copper Alloy Plating: Underplating: 100 μ” [ 2.54 μm ] Nickel - Overall Wiping Area: 30 μ” [ 0.76 μm ] Gold Solder Tails: 200 μ” [ 5.08 μm ] Tin Lead or Matte Tin (See Ordering Information) Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 2 A (EIA 364-70) Insulation Resistance: >1 × 109 Ω at 500 VDC Withstanding Voltage: 1,000 VRMS at Sea Level Environmental Temperature Rating: -55°C to +105°C Process Rating: 260°C (High Temp. PCT insulator) single pass (per J-STD-020C) PBT gray insulator, maximum insulator temperature 191°C (solder wave process only) Moisture Sensitivity Level: 1 (per J-STD-020C) High Temp. (PCT) versions only UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Three-Wall Condo Header .100 × .100 Right Angle -D00X Header without Latch Ejector 3000 Series -D20X Header with Short Ejector/Latch for 3M Sockets without Strain Relief -D30X Header with Long Ejector/Latch for 3M Sockets with Strain Relief .08 [2.0] .08 [2.0] .573 ± .010 [14.55] .68 [17.3] .424 ± .010 [10.77] 1.28 Ref [32.5] 1.18 Ref [30.0] A .46 Ref [11.7] .37 Ref [9.4] D .100 2.54 REF. .28 7.1 .020 0.51 .590 14.99 POSITION #1 .100 2.54 .100 2.54 REF. REF. A Position 1 Orientation Triangle Notch B (See Table 1) Notch A (See Table 1 & Note 1) .020 [0.51] Notch C (See Table 1 & Note 1) .24 [6.1] .16 [4.1] .025 Sq Typ [0.64] .89 [22.61] .51 [13.0] .100 [2.54] REF. .112 ± .01 [2.84] .20 [5.1] C .035 [0.89] 2X ø.100 [2.54] TS-0773-G Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Three-Wall Condo Header .100 × .100 Right Angle 3000 Series Table 1 Dimensions Pin Quantity 3M Part Number A C D Polarizing Notches 20 3793 1.26 (32.1) 0.865 (21.97) 0.71 (18.0) BC 28 3314 1.46 (37.2) 1.065 (27.05) 0.91 (23.1) BC 32 3408 1.56 (39.7) 1.165 (29.59) 1.01 (25.6) ABC 40 3428 1.76 (44.8) 1.365 (34.67) 1.21 (30.7) ABC 48 3627 1.96 (49.8) 1.565 (39.75) 1.41 (35.8) ABC 52 3429 2.06 (52.4) 1.665 (42.29) 1.51 (38.3) ABC 60 3440 2.26 (57.4) 1.865 (47.37) 1.71 (43.4) ABC 68 3431 2.46 (62.6) 2.065 (52.45) 1.91 (48.5) ABC 80 3432 2.76 (70.2) 2.365 (60.07) 2.21 (56.1) ABC 100 3433 3.26 (82.9) 2.865 (72.77) 2.71 (68.8) ABC 120 3372 3.76 (95.6) 3.365 (85.47) 3.21 (81.5) ABC 128 3764 3.96 (100.7) 3.565 (90.55) 3.41 (86.6) ABC .232 [5.89] .029 Typ [0.74] ø.040 ± .003 [ 1.02 ] (After Plating) ø .100 Typ [2.54] .100 Typ [2.54] Position 1 .100 Typ [2.54] Recommended Hole Pattern Notes: 1. Notches A & C will accomodate 3M Polarizing Key (3M Part Number 3518 or N3518). 2. 112 [2.84] tail length suitable for .062 [1.57] thick pc board. 3. Contact your 3M sales representative for custom requirements. 4. Use of snap-in style latch/ejectors in either short (X3XXX-D502XX) or X3XXX-D602XX) styles, installed or shipped separately (-5 & -6 snap-in latches are dimensionally and functionally equivalent to -2 & -3 roll pin latches) 5. Mounting hardware: From solder side of pc board use #4-*24 thread cutting screw (3M Part 3341-5) and .116 dia. mounting hole. See Illustrations on page 4. Inch (mm) If ordering Snap-In style latches separately, please use the below chart Short Latch Long Latch Tolerance Unless Noted .0 Color High Temp (PBT) 3505-30 3505-31 Gray High Temp (PPA) N3505-30B N3505-31B Black Inch ± .1 .00 .000 ± .01 ± .005 [ ] Dimensions for Reference only Ordering Information X3XXX - DX02XX N = High Temp Black (PCT) (RB Plating Req’d) Blank = Std. Temp Gray (PBT) (Blank or UB Pltg. Req’d.) 3M Part Number 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com RB = 30μ” [0.76μm] Gold with Matte Tin Tails (App. E1 & C1 Apply) Blank or UB = 30μ” [0.76μm] Gold with Tin Lead Tails (App. E3 & C2 Apply) Latch/Ejector System 0 = No Latch/Ejector Installed 2 = Short, Roll Pin Latch/Ejectors 3 = Long, Roll Pin Latch/Ejectors TS-0773-G Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Three-Wall Condo Header .100 × .100 Right Angle 3000 Series Polarizing Post .318 [8.08] 3 2 0 1 -4 3 2 0 1 -5 LCP PBT B la c k G ra y .100 Dia [2.54] Note: Insert Post into one mounting hardware hole on bottom of header. Set post to protrude .115” [2.92] Polarizing Keys Dim A N3518 LCP Black .02 3518 PBT Gray .02 Breakaway Tab .09 [2.3] .34 Ref [8.6] A .15 [3.8] Note: #2216 B/A Scotchweld can be used to adhere keys. Mounting Hardware 3341-5 (Installed from bottom of board) 3341-6 (Must be inserted prior to latch on vertical headers) .50 [12.7] .31 [7.9] Panhead Thread Cutting Screw: #4-24 X 5/16” Type: USA Std BT, Federal BG Hex Head Bolt, Nut and Washer Bolt - #2-56 X 1/2” 3341-5 & 6 Material - Stainless Steel TS-0773-G Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com Please recycle. Printed in USA. © 3M 2012. All rights reserved. RIA-2217B-E