Pomona® DIP Clips® for 8-14-16-20-24-40 Pin Clips And 8 Through 40 Pin DIP Removers Pomona DIP Clip® test clips are designed for testing dual-in-line IC packages on PC boards. These devices incorporate many built-in features that assure a positive electrical connection as well as hands free testing. • Contacts (.040" wide on lower end) are serrated for the best electrical contact. • .025" X .028" serrated test points on upper end will accept wire wraps or mini test clips. • Molded barriers between contacts allows live board connections without accidental shorting of contacts. • Can also be used as an insertion tool for DIPs. • Contacts are spring tempered Nickel Silver or Gold Plated Beryllium Copper alloy. roughened stainless steel surface treatment. Oxide penetrating clips have a • Open back option allows probing on the chip leads while clip is attached. Pomona's DIP Clip® test clips are perfect for emulation, field service, failure analysis, and for use with logic analyzers. Size Pins Clip Width Standard Open Back Contact Material and Oxide Penetrating DIP Clip® DIP Clip® Plating DIP Clip® Static Control DIP Remover 8 .43 5108 5208 Be-Cu, Gold Plate 5649 5016 14 .72 5014 5114 Nickel Silver 5650 5016 5214 5314 Be-Cu, Gold Plate 5650 5016 3916A 4236A Nickel Silver 5692 5016 5116 5216 Be-Cu, Gold Plate 5692 5016 16 .83 20 1.03 5120 5220 Be-Cu, Gold Plate 5693 5016 24 1.22 4124A 4324A Nickel Silver 5694 5024 5124 5224 Be-Cu, Gold Plate 5694 5024 4140A 4340A Nickel Silver 5695 5040 5140 5240 Be-Cu, Gold Plate 5695 5040 40 2.02 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 4/16/02 SY/EH/LS Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 T:\Release\DataSheets\FlukeDataSheet\FlukeDataSheet\Dip_Clips_4386_2_01.doc PomonaACCESS 90220 (800) 444-6785 or (949) 253-3858 More drawings available at www.pomonaelectronics.com Page 1 of 2 Pomona® DIP Clips® for 8-14-16-20-24-40 Pin Clips And 8 Through 40 Pin DIP Removers FEATURES: • For use with 14 or 16 Dual-In-Line I.C. packages. MATERIALS: Insulation: Glass filled nylon. Color: Red. Hinge Pin: Stainless steel 302, passivated per QQ-P-35. RATINGS: Operating Temperature: +102°C. (+216°F.) Max. ORDERING INFORMATION: Model 4386 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 4/16/02 SY/EH/LS Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 T:\Release\DataSheets\FlukeDataSheet\FlukeDataSheet\Dip_Clips_4386_2_01.doc PomonaACCESS 90220 (800) 444-6785 or (949) 253-3858 More drawings available at www.pomonaelectronics.com Page 2 of 2