7.4 x 3.4 x 1.8 mm SMD CERAMIC RESONATOR AWSZT-MGD AWSZT-MGD RoHS Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) Compliant FEATURES: • Low resonant impedance • IR reflow capable • Low cost 7.4 x 3.4 x 1.8 mm | | | | | | | | | | | | | | | APPLICATIONS: • Remote controls, Microprocessor clocks, Mobile phones, DVD & CD-Roms, Electric appliances • Consumer electronics ELECTRICAL CHARACTERISTICS: Parameters Minimum Typical Maximum Units 2.00 ------------- ----------------- 8.00 100 50 30 MHz 24 30 36 pF -0.5 -0.3 ----- ----- +0.5 +0.3 ----- % % V 6 15 ----85 85 0.3 V Vp-p. MΩ ºC ºC % Frequency Range Resonant Impedance (Ro) Load Capacitance for Test Circuit (C1=C2) Frequency Tolerance Frequency Stability Withstanding Voltage Rating Voltage (1) D.C. Voltage (2) A.C. Voltage 50 ------------------------- --------100 -25 -55 -0.3 Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) (10 years) Ω Notes 2.00 MHz - 2.99 MHz 3.00 MHz - 3.49 MHz 3.50 MHz - 8.00 MHz -25º C to +85ºC DC , 1 min 10V, 1min TEST CONDITION AND TEST CIRCUIT: Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure OPTIONS & PART IDENTIFICATION: AWSZT Frequency Frequency in MHz ABRACON IS ISO9001:2008 CERTIFIED MGD Packaging T: 1000pcs/Reel T4: 4000pcs/Reel Revised: 07.29.11-F Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 7.4 x 3.4 x 1.8 mm SMD CERAMIC RESONATOR AWSZT-MGD AWSZT-MGD RoHS Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) Compliant 7.4 x 3.4 x 1.8 mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Recommended Land Pattern Dimension: mm REFLOW PROFILE: ABRACON IS ISO9001:2008 CERTIFIED Revised: 07.29.11-F Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 7.4 x 3.4 x 1.8 mm SMD CERAMIC RESONATOR AWSZT-MGD AWSZT-MGD RoHS Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) Compliant 7.4 x 3.4 x 1.8 mm | | | | | | | | | | | | | | | TAPE & REEL: T: 1000pcs/reel T4: 4000pcs/reel Reel Quantity 1000 (T) 4000 (T4) A 3.8±0.2 Dimensions: mm ФA 179±2 330±3 B 7.8±0.2 ФB 60 typ. 80 min W 16.4 min 16.4 min C 16.0±0.2 D 7.5±0.1 T 22.4 max 22.4 max F 8.0±0.1 Pieces per reel 1000 typ. 4000 typ. ØN 1.55±0.05 Carrier tape size 16 16 K 2.1±0.1 T 0.3±0.05 CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Shelf Life: The warranted Shelf Life of this product is Six Months after the Delivery Date under the conditions of sealed, unopened, original packaging. (7) Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (8) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-reliability, life dependant applications. Contact Abracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED Revised: 07.29.11-F Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com