ACT ACT_HC49_U_STANDARD

Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT HC49/U ( Standard Devices )
The ACT HC49U family is available in industry standard package and specifications. This series
offers a broad range of frequencies and tolerances in both standard and industrial temperature
ranges. Housed in resistance welded cases the HC49U offers excellent aging characteristics.
Cost / performance ratios are extremely good for this family of devices and they offer reasonably
high density mounting capability, where height isn't a restriction. Low frequencies are also more
readily available in this type of package. Various optional packages and custom specifications are
available - PLEASE SEE SEPARATE DATA SHEET FOR ACT HC49/U ( CUSTOM OPTIONS )
Specification
Parameter
Specification
Symbol
fo
Frequency Range
∆f/fo
Τopr
∆f/Fo
Tstg
ESR
CO
CL
DL max
DLD
IR
Fa
Frequency Tolerance @25°C
Temp Operating Range
Stability over Temp Range °C
Temp Storage Range
Equivalent Series Resistance
Shunt Capacitance
Load Capacitance
Drive Level
Drive Level Dependency
Insulation Resistance
Aging
Condition
1.8432MHz ~ 150MHZ
Please specify
Fundamental & 3rd to 7th O/T
±5ppm ~ 100ppm (30ppm Std )
Please specify
-10~+60°C,-20~+70°C & -40~+85
Please specify
Please see table 2
Please specify
-40°C to +85°C
Please see table 1
Dependent on cut & frequency
7pF max
8 ~ 55pF or SR
Please specify
100µW typ
Options available - please enquire
∆ Freq & ESR
0.01, 0.1, 1, 10, 50, 100 mW steps
500MΩ Min
@ DC 100V ±15V
±3ppm / year [email protected]°C
ESR and mode of oscillation
Table 1
ESR (Ω) max
Frequency (MHz)
Mode
ESR (Ω)
Frequency (MHz)
Mode
1.8432 ~ 1.999
2.000 ~ 2.399
350
300
AT Fund
AT Fund
7.000 ~ 9.999
10.000 ~ 12.999
30
20
AT Fund
AT Fund
2.400 ~ 2.999
200
AT Fund
13.000 ~ 30.000
20
AT Fund
3.000 ~ 3.199
150
AT Fund
24.000 ~ 29.999
50
3rd Overtone
3.200 ~ 3.499
100
AT Fund
30.000 ~ 65.000
40
3rd Overtone
3.500 ~ 3.899
90
AT Fund
60.000 ~ 99.999
90
3rd Overtone
3.900 ~ 4.099
70
AT Fund
90.000 ~ 120.000
90
5th Overtone
4.100 ~ 5.999
60
AT Fund
120.000 ~ 150.000
90
7th Overtone
6.000 ~ 6.999
Table 2
50
AT Fund
Frequency stability Vs operating temperature range
Stability
Temp
±10ppm ±15ppm ±20ppm ±25ppm ±30ppm ±50ppm
-10 ~ +60°C






-20 ~ +70°C






-40 ~ +85°C
Enquire





Please note that all parameters can not necessarily be specified in the same device
Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature Range, Load Capacitance & Mode
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
Issue: 9 SCB
Date 20-11-2012
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT HC49/U ( Standard Devices )
Standard Frequencies (MHz)
1.8432
4.4336
7.3728
12.0000
20.0000
50.0000
2.0000
4.9152
7.3728
12.2880
22.1184
56.4480
2.0974
5.0000
7.6800
13.0000
24.0001
60.0000
2.4576
5.0688
8.0000
13.8750
24.5760
64.0000
2.8224
5.1200
8.1920
14.0000
25.0000
3.0000
5.1850
8.6724
14.3182
27.0000
3.2768
5.7143
9.0000
14.7456
28.2240
3.5795
6.0000
9.2160
15.0000
28.6364
3.6000
6.1440
9.8304
16.0000
29.4912
3.6864
6.1760
10.0000
16.3840
30.0000
3.9322
6.4000
10.2450
16.9344
32.0000
4.0000
6.5536
10.7520
17.7345
32.7680
4.0320
6.5539
11.0000
18.0000
36.0000
4.0960
7.0000
11.0592
18.4320
40.0000
4.1943
7.1591
11.2896
19.6608
48.0000
Package / Packaging Options
With insulating washer
Cropped leads (3.5mm, 5mm, 7mm)
Tape and reel, see page 3
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
Issue: 9 SCB
Date 20-11-2012
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
Issue: 9 SCB
Date 20-11-2012
SERIES : ACT HC49/U ( Standard ) Device series code GO
Example :
GO
(HC49/U)
1200
I
K
G
RO
F
L
(12.000MHz )
(±30ppm)
(±30ppm)
(-20+70)
(16pF)
(Fund')
(Loose )
Frequency
Device
Height Code
Max:
GO = 13.5mm
Cropped leads
BD = 3.5mm
BC = 5.0mm
BB = 7.0mm
SA = Washer
Fitted
To 99.9999MHz 1st
four digits of
Frequency
&
>99.9999MHz 1st
five digits of
Frequency
Examples
0983 = 9.8304MHz
1200 = 12.000MHz
9999 = 99.9999MHz
10000 = 100.00MHz
NB:
- PF
(RoHS)
Tolerance (±pm)
@ 25ºC
A
5
E
F
G
I
L
10
15
20
30
50
Operating
Temperature
Range (ºC)
Std
E
G
-10+60
-20+70
M
-40+85
Load
Capacitance
( pF or Series
GO
JO
KO
MO
OO
ZO
PO
RO
TO
VO
AA
BA
DA
FA
JA
SR
Std
Stability Over
Operating
Temperature (ºC)
F
G
I
J
K
O
It is important to suffix
the above P/No with
the full frequency
required to give a
complete P/No as
illustrated below
10
15
20
25
30
50
Std
A
F
Mode
3rd O/T
RoHS
Comp'
- PF
Fundamental
8
9
10
11
12
14
15
16
18
20
24
25
30
33
50
SR
Packaging
Std
L = Loose
C =1K T&R
Commodity code
854160 00 00
Available Stabilities
Full Example Part Number
GO1200IKGROFL-PF
12.00MHz
Stability
Temp
±10ppm ±15ppm ±20ppm ±25ppm ±30ppm ±50ppm
-10 ~ +60°C






-20 ~ +70°C






-40 ~ +85°C
Enquire





NOTES :
1)
Tighter Tolerances and Stabilities, other Operating Temperature Ranges and CL's may be available as semi custom devices.
As each of these specification parameters impact on each other, it is not always possible to combine all options in one device.
Therefore, if a specification not catered for above is required, please contact us directly for the relevant part number code(s).
2)
ACT are always happy to consider truly custom specification parts which may require non-standard specification parameters,
specific testing, customer requested AQL requirements, non standard packaging or taping and reeling and custom marking. Such
devices would normally be allocated a custom specification part number which is wholly customer specific. ( MOQ Dependent ) ( EG
: A 12.00MHz custom ACTHC49/U device may have a part number such as GO1200C- C1246-PF)
3)
Frequencies below 10.000MHz are prefixed with a "0" (eg: 0800MHz = 8MHz.Whereas 10.000MHz is 1000 and 100.00MHz
is 10000)
ISO9001 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, United Kingdom
http:www.actcrystals.com
Issue: 9 SCB
Date 20-11-2012