Series AM8T-IZ 8 Watt | DC-DC Converter FEATURES: RoHS compliant 24 Pin DIP Package Wide 2:1 input range Power modules for PCB mounting Operating temperature -40oC to + 75oC Regulated output Low ripple and noise Input/output Isolation voltage 1500VDC Models Single output Input Voltage (V) Model AM8T-0503SIZ AM8T-0505SIZ AM8T-0512SIZ AM8T-0515SIZ AM8T-1203SIZ AM8T-1205SIZ AM8T-1212SIZ AM8T-1215SIZ AM8T-2403SIZ AM8T-2405SIZ AM8T-2412SIZ AM8T-2415SIZ AM8T-4803SIZ AM8T-4805SIZ AM8T-4812SIZ AM8T-4815SIZ 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 Output Voltage (V) Output Current max (mA) 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 Capacitive Load, max(uf) 1600 1600 660 530 1600 1600 660 530 1600 1600 660 530 1600 1600 660 530 Ripple & Noise max, (% mV p-p) 18400 18400 18400 18400 6930 6930 6930 6930 6800 6800 6800 6800 5030 5030 5030 5030 Efficiency (%) 80 80 120 150 80 80 120 150 80 80 120 150 80 80 120 150 74 79 83 83 75 83 85 85 81 83 88 87 81 83 88 87 Models Dual output Input Voltage (V) Model AM8T-0505DIZ AM8T-0512DIZ AM8T-0515DIZ AM8T-1205DIZ AM8T-1212DIZ AM8T-1215DIZ AM8T-2405DIZ AM8T-2412DIZ AM8T-2415DIZ AM8T-4805DIZ AM8T-4812DIZ AM8T-4815DIZ 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 Output Voltage (V) Output Current max (mA) ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 Capacitive Load, max(uf) ±800 ±330 ±260 ±800 ±330 ±260 ±800 ±330 ±260 ±800 ±330 ±260 Ripple & Noise max, (%) ±9200 ±9200 ±9200 ±3465 ±3465 ±3465 ±3400 ±3400 ±3400 ±2515 ±2515 ±2515 Efficiency (%) 80 120 150 80 120 150 80 120 150 80 120 150 85 85 85 85 85 85 83 88 87 83 88 87 Input Specifications Parameters Voltage range Nominal Typical 5 12 24 48 4.5-9 9-18 18-36 36-75 (Pi) Network Filter www.aimtec.com F 051e R6.E Tel: +1 514 620 2722 1 of 4 Maximum Units VDC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8T-IZ 8 Watt | DC-DC Converter Input Specifications (continued) Parameters Nominal Typical Maximum 5 Vin 12 Vin 24 Vin 48 Vin 10 20 40 83 2 Absolute Maximum Rating Permissible absolute maximum duration Units VDC h Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical Rated Units 1500 VDC MOhm pF Maximum Units 60 sec > 1000 1000 Output Specifications Parameters Voltage accuracy Short Circuit protection Short Circuit restart Over voltage protection Over load protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Conditions Typical ±2 Auto recovery HL-LL HL-LL 25 – 100% load 25 – 100% load % Continuous Auto recovery Zener diode clamp Over 110% full load ±0.5 ±0.5 ±0.5 ±2 ±0.05 % % % % %/oC General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 300 KHz o Operating temperature Derating above +70 oC -40 to +75 C o Storage temperature -55 to +115 C o Maximum Case +95 C temperature Cooling Free air convection Humidity 95 % Case material Nickel coated cooper Weight 33 g Dimensions (L x W x H) Tolerance ±0.02 inch, ±0.5mm 1.25 x 0.80 x 0.40 inches 31.80 x 20.30 x 10.20 mm MTBF > 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Standards Agency approvals Safety www.aimtec.com F 051e R6.E CE EN 55022: 2006 + A1: 2007 EN 55024: 1998 + A1:2001 + A2:2003 IEC 61000-4-2: 2008 IEC 61000-4-3: 2006 + A1: 2007 IEC 61000-4-4: 2004 IEC 61000-4-6: 2008 IEC 61000-4-8: 2009 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8T-IZ 8 Watt | DC-DC Converter Dimensions Dual -V Input -V Input N.C. Omitted N.C. +V Output Omitted -V Output +V Input +V Input -V Input -V Input Common Omitted -V Output + V Output Omitted Common +V Input +V Input 2 20.30 (0.80) Single 2 3 9 10 11 14 15 16 22 23 22.80 (0.90) 0.50 (0.02) 3 9 11 Bottom View 23 22 2.50 (0.10) 16 14 5.00 (0.20) Printed Face 3.80 (0.15) 10.20 (0.40) Pin 31.80 (1.25) 15.20 (0.60) Pin Out Specifications Block Diagrams www.aimtec.com F 051e R6.E Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8T-IZ 8 Watt | DC-DC Converter Derating D 400 LFM 85 ºC C 200 LFM 80 ºC B 100 LFM 75 ºC A Free Air 70 ºC A B C D 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.E Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only