RoHS Single Port RJ45 Connector AR1015-1221S 10/100 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265°C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0ºC to +70ºC Electrical Speciļ¬cations @ 25°C Part Number AR1015-1221S OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Turns Ratio chip: cable (±3%) 1CT:1CT Insertion Loss (dB Max) 0.5-100MHz 1.1 Return Loss (dB Min) 30.1-60MHz 18-20*log(f/30) 0.5-30MHz 18 60.1-80MHz 12 Electrical Speciļ¬cations @ 25°C Part Number EMI Fingers LED (L/R) AR1015-1221S NO G/Y Cross Talk (dB Min) 0.5-40MHz 40.1-100MHz 35 33-20*log(f/50) CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: ±0.25 in mm 15.90 LED-L GREEN LED-R YELLOW P9 P10 3.5 13.50 21.60 Max 4.06 2.54 3.05 8.89 P11 P12 ALLIED AR1015-1221S YYWW P1 P8 Back View 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1502/01/12 www.alliedcomponents.com RoHS Single Port RJ45 Connector AR1015-1221S SCHEMATICS YELLOW GREEN P9 P11 P10 P12 Notes: 1. R1-R4=75OHMS,1/16W,5%Resistors. 2. C1=1000pF,2KV Decouping Capacitor. 3. LED Compliant With IEC60825-1 Saftety of Laser Products When operated Up to 20mA. 4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW, LED Peak Wavelength: Green=565nm, Yellow=5 PCB LAYOUT Unless otherwise specified all tolerances are: ±0.05 in mm 2. 54 2.54 1.27 3. 05 8. 89 2 8 1 4. 06 9 7 10 2.54 11 12 8.18 11.43 15.49 15.90 MATERIALS Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.20mm thick, 50u" Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, 6u" Gold plated. LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1502/01/12 www.alliedcomponents.com