RoHS AR11-3720I Single Port RJ45 Connector 10/100 Base-T Impedance: 100OHMS RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Industrial Temp: -40ºC to +85ºC Contact Factory for Standard Temp. Available in other Circuit Designs Optional Gold Plating Thickness Other LED Patterns available Electrical Specifications @ 25°C OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Part Number AR11-3720I Insertion Loss (dB Max) 0.3-100MHz -1.0 Turns Ratio chip: cable (±2%) 1CT:1CT 30MHz -18 Return Loss (dB Min) 50MHz -15 80MHz -12 Electrical Specifications @ 25°C 30MHz -38 Cross Talk (dB Min) 60MHz -38 100MHz -38 CMR (dB Min) 60MHz -40 30MHz -40 100MHz -40 HI-POT (Vrms) 1.0mA/3Sec. 1500 All specifications subject to change without notice. MECHANICAL Green Yellow AR11-3720I 714-665-1140 10 11 9 12 ALLIED COMPONENTS INTERNATIONAL 10/18/12 15 www.alliedcomponents.com RoHS RoHS Single Port RJ45 Connector AR11-3720I SCHEMATICS PCB LAYOUT NOTES 1. Shield- 0.20mm THICKNESS BRASS C2680 H. PLATING NICKEL 30u"-50u" 2. HousingStandard Material Nylon66, Glass filled Polyester UL94V-0 Standard Color Black. 3. RJ Terminal- Plastic: Nylon66, GF UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze C5210 EH. Plating: Nickel 40u"-60u" for all and Sn 100%, and 6u” Gold Plating. 4. Input Terminal: Plastic: Nylon66, Glass Filled, UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze SUS430. Plating: Nickel 40u"-60u" for all and Sn 100%. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 10/18/12 15 www.alliedcomponents.com