AMPHENOL 62GB16T

62 GB- Series Plugs
CE-2Pa
Miniature Bayonet Lock Connectors
Complies with MIL-C-26482
This miniature bayonet lock connector series offers designers
important features not found in any other range of connectors.
They are developed and manufactured entirely in the U.K.
by AMPHENOL Ltd., and have full qualification approval to
British Standards Specification BS 9522 F0017 and British
Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.
This catalogue to be used in conjunction with Catalogues:
CE-2Ra – 62GB Series Receptacles
CE-2Aa – 62GB Series Accessories
Amphenol
1
62GB and
Pattern 608
New Planforms
Current:
(a)
Current:
Maximum current per individual contact (in isolation)* at ambient
temperature of 85°C
(a)
Contact size 12: 23 A
(b)
Maximum current per contact through all contacts simultaneously at
an ambient temperature of 85°C
Maximum current per
individual contact (in
isolation)* at ambient
temperature of 85°C
Contact size 8: 45 A
(b)
Contact size 12: 20 A
Maximum current per contact
through all contacts
simultaneously at an ambient
temperature of 85°C
Contact size 8: 40 A
Voltage rating
Working voltages **
(nominal)
d.c. or a.c. peak
Voltage proof
d.c. or a.c. peak
*
g
**
Sea level
1013 mbar g
I
II
III
700
1200
1500
8500m (27,900ft)
320 mbar
I
II
III
550
650
800
21,340m (70,OOOft)
44 mbar
I
II
III
330
380
450
2100
1100
660
3000
3000
1300
1300
760
750
i.e. when only one contact per connector is electrically loaded.
1 mbar=102 N/m2=100 Pa
Establishment of electrical safety factors is the responsibility of the user
2
CONTENTS
Amphenol 62GB Solder Connectors
Schedule of Tests
Page
4
5-6
Connector Styles Available
7
Insert Availability
8
Ordering 62GB Series Connectors
10-11
Plugs - Table of Styles
12-13
Plugs
14-19
Insert Orientations
20
Key/Keyway Orientations
21
This catalogue to be used in conjunction with Catalogues:
CE-2Ra – 62GB Series Receptacles
CE-2Aa – 62GB Series Accessories
This miniature bayonet lock connector series offers
designers important features not found in any other range
of connectors. The range has full qualification approval to
British Standards Specification BS 9522 FOO 17 and British
Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.
62GB Series connectors - developed and manufactured
entirely in the United Kingdom by Amphenol Limited. They
are the first and only British connectors to have achieved
this. A doubly strong position which Amphenol are well
geared to handle. The manufacturing facilities of the
Whitstable plant have been cited as exemplary in Europe.
Certainly the layout is extensive and extremely efficient;
safety awards have been attained every time returns have
been submitted to the British Safety Council.
62GB Series connectors have been well established with
Government authorities on an international scale and users
can be found in Sweden, Denmark, Norway, Finland,
Germany, Spain, Holland, India, Canada and Italy.
Amphenol ® 62GB
solder connectors
Basic Construction
62GB Series can be supplied in brass or stainless steel.
The normal shell finish used, which has a high resistance to
corrosion, is zinc cobalt olive drab. Other finishes may be
supplied to special order, such as cadmium plate which is
available by adding deviation (714) to the end of part
number.
Inserts are of polychloroprene rubber compounded to an
Amphenol specification. Operating temperature range is
-55°C to 125°C, and the connectors have gold-plated
contacts designed for soldered connections. Configurations
for size 20 contacts range between 2 contacts in the size 8
12.7mm (0.5in diameter) shell up to a maximum of 61
contacts in the size 2436.1 mm (1.5in diameter) shell.
Intermediate sizes, and contact data for heavier current
ratings are shown in the insert availability chart on page 6
and 7.
Derating
Connectors must be derated under the following
operating conditions:
1.
2.
3.
At elevated ambient temperatures, the current ratings
are reduced so that total maximum hot spot
temperature of 125°C is not exceeded.
At high altitudes, revised voltage ratings become
effective as shown on page 7.
When connectors to different specifications are
intermated (e.g. BS 9522 FOO 17 and
MIL-C26482), the combination must not be
operated under conditions more severe than the
less stringent clause of either specification.
Amphenol 62GB connectors are designed to meet
the most stringent requirements of both
specifications.
Military Specifications
British Standards Specification BS 9522 FOO 17
closely corresponds to the United States Military
Specification MIL-C-26482 solder terminations.
Certain differences exist between the schedules which
can be seen on pages 2 and 3.
Hermetic connectors with glass sealed dialectric are
manufactured with mild steel shells and nickel iron
contacts plated tin over copper.
*
Other finishes are available on request.
Protection Against Mis-Mating or Cross-Plugging
In BS 9522 FOO 17 positive shell-to-shell keying is
provided with keys and keyways in a choice of either the
normal (N) or any of the four preferred alternate
positions: B, C, E and F. This prevents mismating between
shells of different orientations and overcomes the
difficulties associated with rotated inserts and a standard
key-keyway orientation. In the latter system, damage to
the inserts or contacts can result if excessive force is used
to engage non-mating pairs.
Rotated inserts are, however, permissible in BS 9522 FOO
17 connectors if required to mate with or replace units to
MIL-C-26482 mounted in existing equipment. Connectors
have normal orientations manufactured to BS 9522 FOO 17
or MIL-C-26482 are fully intermateable as also are
connectors with inserts in positions W, X, Y or Z.
Approved gauges are used to check interchangeability
of 62GB series with other connectors manufactured to
BS 9522 FOO 17 or MIL-C-26482.
4
Schedule of Tests
Required for Qualification
Approval
Tests
Brief Description
Visual Examination
Dimensions, outline mass(including
contacts) Compatability Gauging
procedure
Polarization
Engaging and separating force, connector
Engagement max: 0,90 Nm (8.0 lbf.in.) to
4,97 Nm (44 lbf.in.) according to shell size.
Separation min: 0,22 Nm (2.0 lbf.in.) to 1,58
Nm (14.0 lbf.in.) according to shell size.
Contact Holding Force
0,21 N (0.047 lbf) min.size 20
0,56 N (0.126 lbf)min. size 16
Sealing (air pressure)
Max leakage 28,53 uNm/s (1 cm3/h), 1
bar (14.5 p.s.i.) differential.
Sealing Hermetic
Hermetic receptacles have a max leak of 0.1 micron
cubic foot per hour (1 x 10-6Cm3/s)
Contact Resistance
5 milliohms max.
Housing (Shell) Continuity
200 milliohms max. 5 milliohms max.
grounding spring styles.
Insulation Resistance
5,000 Megaohms at 500 - 50 V d.c.
Voltage Proof
See page 7. Duration 1 minute
Soldering
As BS 9520: 1974, Clause 1.2.6.6,
Method 2.
Bumping
As BS 9520: 1974, Clause 1.2.6.1. 4,000
-10 bumps / 390m / s2 (40 gn).
Vibration
As BS 9520: 1974, Clause 1.2.6.2.1. Procedure A. 10 Hz
to 5000 Hz, 0.75 mm / 10 gn.
Shock
As BS 9520: 1974, Clause 1.2.6.3. 981
m/s2 (100 g n).
Acceleration (Steady State)
As BS 9520: 1974, Clause 1.2.6.4. 490
m/s2 (50 gn).
Rapid Change of Temperature
As BS 9520: 1974, Clause 1.2.6.7. -550
C to - 1250 C.
Climatic Sequence
As BS 9520: 1974, Clause 1.2.6.11.
Severity 55/125/56.
Flammability
As BS 9520: 1974, Clause 1.2.6.8. Direct
flame applied, duration 1 minute.
Damp Heat (Steady State)
As BS 9520: 1974, Clause 1.2.6.14.
Severity 56 days.
5
Schedule of Tests
Required for Qualification
Approval
Tests
Brief Description
Immersion (at low air pressure)
3 cycles at 30 mins each cycle, total immersion in
water at pressure 44 m bar.
Mechanical Endurance
500 operations minimum
High Temperature Endurance
Long term: 1,000 hrs. at 850C ambient carrying the
specified current. Short term: 250 hrs at 1250C, no
current.
Mould Growth
As BS 9520: 1983, Clause 1.2.6.16.
28 days duration.
Salt Mist
As BS 9520: 1983, Clause 1.2.6.17.
Severity 1.
Dust
As BS 9520: 1983, Clause 1.2.6.18
Exposure 30 minutes.
Robustness of Terminations
44,5 N (101bf) size 16
22,2 N (5 lbf) size 20
Contact Retention (in insert)
67,0 N (15 lbf) min. size 20
112,0 N (25 lbf) min. size 16
Insert Retention (in shell)
517 KN1m2 (751bf/in2) min.
Test Prod Damage
Moment: 0,056 Nm (0.5 lbf in) size 20
0,225 Nm (2 lbf in) size 16
Impact
Five impacts, drop height 1 m (3ft.3 in.).
1,17 N (0.263 lbf) to 2,74 N (0.616 lbf)
according to size.
Grounding Spring Holding Force Plugs
with grounding springs only.
Immersion in 4 solvents and 9 fluids
including aircraft fuels, lubricating oils and
hydraulic fluids.
Fluid Resistance
Compass Safe Distance
As BS 9520: 1974, Clause 1.2.5.11. 127
mm (5.0 in) min.
6
Connector Styles
Available
Plugs
Straight Plug
See Pages 14-17
Accessories
See Catalogue CE-2Aa
Grounded Plug
See Page 14
Audio Plug
See Page 18
Push on - Pull off
See Page 19
7
Insert Availability
CURRENT RATING
NOTES
*
This insert arrangement is not included in B.S.
spec., but is available and. listed in MIL-C-26482.
g
Due to the arrangement of contacts in the
14-12 insert arrangement it is classified, for
current derating, in the shell size range 18-24.
Lettering of inserts shown above corresponds to view of front
(mating surface of pin inserts or rear face (cable accessory
end) of socket inserts.
KEY
• No 16 size contacts
Maximum current per individual contact (in isolation) at a
maximum ambient temperature of 85°C: Size 20 contact 7.5A
Size 16 contact 13-OA The performance of 62GB Series
connectors at all times exceeds the maximum continuous
bunched rating of the appropriate size wire, or cable of
equivalent temperature rating. This bunched rating is therefore
the determining factor. In the case of mixed loadings, the
greatest individual load shall be the bunched loading. In any
combination of ambient temperature plus temperature rise due
to current flow through the contacts, the maximum connector
internal hot spot temperature of 125°C must not be exceeded.
That is, when only one contact per connector is loaded.
O No 20 size contacts
8
Insert Availability
VOLTAGE RATINGS
22
24
22-55
24-61
ALTITUDE
D.C.
WORKING
VOLTAGE
A.C.
WORKING
VOLTAGE
R.M.S.
PROOF
VOLTAGE
D.C. OR A.C.
PEAK
Rating 1
Sea level
700
500
2100
300 mb at
20°C
8,500m
(27,800 ft)
550
390
1100
44 mb at
20°C
20,000m
(66,000 ft)
330
230
660
Rating 2
Sea level
300 mb at
20°C
8,500m
(27,800 ft)
44 mb at
20"C
20,000m
(66,000 ft)
120
850
3000
650
460
1300
380
270
760
VOLTAGE RATINGS
Two categories of voltage rating are specified in
BS9522 F0017, F0038 and N0001.
Rating 1 (700V d.c. working at sea-level) Applicable to the
high contact density inserts shown in the upper section of the
insert availability diagram above.
Rating 2 (1200V d.c. working at sea-level) Applicable to
the inserts shown in the lower section of the insert
availability diagram.
ALTITUDE-THOUSANDS OF FEET (METRES)
Relationship between flashover voltage and
altitude for each voltage rating
Altitude derating. Information on voltage derating for
operation at altitudes above sea-level can be obtained from
the flashover voltage altitude curves on the left.
9
Ordering
62GB Series
Connectors
To obtain the specific connector required write down the connector number from the
typical example below. Only inserts shown in the availability chart on p. 10&11 can be
specified. All connectors are delivered with protective dust covers
SHELL STYLE
62GB
1
Series designation
62 GB - Aluminium shell
62 GB SS -Stainless steel shell*
62 GB CU - Brass shell*
*consult factory for availability
62GB-XXH-Hermetic mild
steel shell.
4
Specification key
1 - Styles originally specified in
MIL-C-26482
5 - Styles exclusive to
BS9522 F0017
E
Shell style
0 - Receptacle wall mounting
1 - Receptacle cable
mounting
2 - Receptacle box mounting
3 - Receptacle, solder flange
mounting
4 - Receptacle, internally
threaded with cable
accessories as illustrated, for
single hole mounting
6 - Plug cable mounting
7- Receptacle, plain shell,
single hole mounting
Environmental code
A - Plain shell, exposed
solder buckets. No
grommet
E - Insert seal and grommet seal
with grommet nut (excluding
12E which has plain shell and
no grommet or nut)
F - As (E) but grommet nut
has integral strain relief
clamp
H - Hermetic seal no cable
accessories
J - As (E) but with resilient gland
seal and nut for unscreened
jacketed cable. No grommet
supplied. See pp. 26-27 for
accessory to accept
screened jacketed cable.
P - Potting construction
complete with potting
mould
T - Exposed solder buckets.
Threaded shell for cable
accessories
HOW TO ORDER FROM MS CONNECTOR NUMBERS
Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specified
in MIL-C-26482 which does not include alternative key/keyway orientations.
MS31
62GB
-
14
14
E
E
18 -11
18 -11
P
P
X
X
10
Ordering
62GB Series
Connectors
INSERT ARRANGEMENT
18
11
Shell size (in sixteenths of an
inch) 8, 10, 12, 14, 16
18,20,22,24
Number of contacts
2, 3, 4, 5, 6, 7, 8, 10, 11, 12,
16, 19, 21', 23, 26, 32, 41, 55,
61
* consult factory for availability
P
Contact Style
P - Pins
S - Sockets For hermetic
connectors. P3 denotes pin
contacts with solder bucket
terminations. (Standard range).
P2 denotes pin contacts with
flattened and pierced
terminations.
(Special order).
B
(044)
Orientation
(Omit if normal orientation)
Keys/Keyways: A', B, C, D',
E. F, (see p. 31)
Inserts: W,X,Y,Z.(see p56/57)
*Inactive for new designs
Deviations
(044) Rough grip heavy duty
coupling ring.
(046) Box mounting plug.
(214)Fitted with extension
back shell and strain
relief clamp without
grommet on F types
only
(218) Lever coupling ring
(219)Contacts for flexible punted
wrung (57A and 12E only)
(639) Bright cadmium plated
shells
(345) Contacts for flexible punted
wiring 12H,13H 17H only
(276) Hermetics with gold
plated contacts.
(608) Black anodise.
(416) Electroless nickel
(714) Cadmium plate
olive drab
HOW TO ORDER FROM B.S. CONNECTOR NUMBERS
Select the connector style by reference to BS9522 F0017 using the code below for identification. Note that the B.S.
Specification includes only certain connectors from the table of styles as shown on pp. 8 & 9. Alternative
key/keyway orientations are preferred in the BS9522 F0017 Specification to prevent mis-mating. However, rotated
inserts are permissible where connectors are required to mate with or replace items to MIL-C-26482 on existing
equipment.
62GB - 14E
C2098
Style
18-11
18 11
Insert
Arrangement,
see above
P
M
M - Pin contacts
F - Socket contacts
B
B
Alternative
Key/Key way
Orientation
O
Variant.
0 – Standard
connector
11
Plugs
Table of Styles
Page No.
62GB-56T
14
62GB-56TG
14
62GB-16A
15
62GB-56T
(046)
15
62GB-16E
16
62GB-16F
16
62GB-16P
17
12
Plugs
Table of Styles
Page No.
62GB-16J
17
62GB-5039-10
18
62GB-5055-10
18
62GB-5056-10
18
62GB-5074
19
13
Plugs
56T
62GB-56T
BS9522 F0017 C2092
Basic plug with threaded shell to accept
standard cable accessories
Shell
Size
08
10
12
14
16
18
20
22
24
56TG
A
Max
0.976
24.79
0.976
24.79
0.976
24.79
0.976
24.79
0.976
24.79
0.976
24.79
&976
24.79
0.976
24.79
0.976
24.79
C
max
0.750
19.05
0.859
21.82
1.031
26.19
1.156
29.36
1.281
32.54
1.391
35.33
1.531
38.89
1.656
42.06
1.777
45.14
X
Thread
7/16 - 28 UNEF
9/16 - 24 NEF
11/16 -24NEF
13/16 - 20 UNEF
15/16 - 20 UNEF
1.1 /16 - 18 NEF
1.3/16 - 18 NEF
1.5/16 - 18 NEF
1.7/16 - 18 NEF
62GB-56TG
BS9522 F001 7 C2093
Basic plug with threaded shell to accept
standard cable accessories. Has shell
grounding spring fingers
Shell
Size
08
10
12
14
16
18
20
22
24
A
max
0.976
24.79
0.976
24.79
0.976
24,79
0.976
24.79
0.976
24.79
0.976
24.79
0.976
24.79
0.976
24.79
0.976
24.79
C
max
0.750
19.05
0.859
21.82
1.031
26.19
1.156
29.36
1.281
32.54
1.391
35.33
1.531
38.89
1.656
42.06
1.777
45.14
X
Thread
7/16 - 28 UNEF
9/16 - 24 NEF
11/16 – 24 NEF
13/16 – 20 UNEF
15/16 - 20 UNEF
1.1 /16 - 18 NEF
1.3/16 - 18 NEF
1.5/16 - 18 NEF
11/16 - 18 NEF
14
Plugs
16A
62GB-1 6A
Plug with general duty back shell.
No grommet provided.
Shell
Size
08
10
12
14
16
18
20
22
24
56T
A
max
1.614
41.00
1.614
41.00
1.614
41.00
1.614
41.00
1.614
41.00
1.614
41.00
1.614
41.00
1.614
41.00
1.658
42.11
C
max
0.750
19.05
O.859
21.82
1.031
26.19
1,156
29.36
1.281
32.54
1.391
35.33
1.531
38-89
1.656
42.06
1.777
45.14
G
max
0.561
14.25
0,686
17.43
0.811
20.60
0.936
23.78
1.061
26.95
1.186
30.13
1.311
33.30
1.436
36.75
1.561
39.65
M
Thread
1/2 - 28 UNEF
5/8 - 24 NEF
3/4 - 20 UNEF
7/8 - 20 UNEF
1 - 20 UNEF
1.3/16 -18 NEF
1.3/16 - 18 NEF
1.7/16 - 18 NEF
1.7116 - 18 NEF
62GB-56T(046)
Box-mounting plug. Available for shell size 16:
other sizes to special order. Cable accessories
cannot be fitted.
Shell
Size
16
20
22
A
max
1.042
26.47
1.042
26.47
1.042
26.47
J
max
1.317
33.45
1.625
41.28
1.625
41.28
K
1,000
25.40
1.250
31.75
1.250
31.75
L
6.32 NC
6.32 NC
6.32 NC
15
Plugs
16E
62GB-16E
MIL - C26482 MS3116E
Plug with grommet and grommet
nut
Shell
Size
08
10
12
14
16
18
20
22
24
16F
A
max
1.281
32.54
1.281
32.54
1.281
32.54
1.281
32.54
1.281
32.54
1.281
32.54
1.281
32.54
1.281
32.54
1.281
32.54
C
max
0.750
1.05
0.859
21.82
1.031
26.19
1.156
29.36
1.281
32.54
1.391
35.33
1.531
38.89
1.656
42.06
1.777
45.14
G
max
0.561
14.25
0.686
17.431
0.811
20.60
0.936 I
23.78
1.061
26.95
1.186
30.13
1 .311
33.30
1.436
36.75
1.561
39.65
62GB-16F
MIL - C26482 MS3116F
Plug with grommet and grommet nut fitted with
integral strain relief clamp.
Shell
Size
08
10
12
14
16
18
20
22
24
A
max
1.752
44.50
1.752
44.50
1.752
44.50
1.726
43.84
1.866
47.40
1.866
47.40
2.040
51 .81
2.040
51.81
2.178
55.32
C
dia
max
0.750
19.05
0.859
21.82
1.031
26.19
1.156
29.36
1.281
32.54
1.391
35.33
1.531
38.89
1.656
42.06
1.777
45.14
G
dia
max
0.828
21.03
0.891
22.63
1.016
25.81
1.141
28.97
1.203
30.56
1.426
36.22
1.426
36.22
1.567
39.80
1.735
44.07
H
± 0.005
(± 0.13)
0.156
3.96
0.188
4.78
0.312
7.93
0.375
9.53
0.500
12.70
0.625
15.88
0.625
15.88
0.750
19.05
0.800
20.32
16
Plugs
16P
62GB-16P
MIL-C26482 MS3116P
For potted seal. Supplied complete with
detachable potting mould and location ring.
Shell
Size
A
max
1.306
33.17
1.415
35.94
1.384
35.15
1.384
35.15
1.384
35.15
1.384
35.15
1.539
39.09
1.539
39.09
1.602
40.69
08
10
12
14
16
18
20
22
24
16J
C
max
0.750
19.05
0.859
21.82
1.031
26.19
1.156
29.36
1.281
32.54
1.391
35.33
1.531
38.89
1.656
42.06
1.777
45.14
G
max
0.572
14.53
0.666
16.92
0.822
20.88
0.907
23.04
1.040
26.41
1.165
29.59
1.285
32.64
1.400
35.56
1.540
39.12
Z
min
0.260
6.60
0.463
11.76
0.557
14.14
0.590
14.99
0.713
18.11
0.835
22.21
1.015
25.78
1.015
25.78
1265
32.13
62GB - 16J
Plug with cable clamp for unscreened
jacketed cable. No grommet supplied.
Shell
Size
08
10
12
14
16
18
20
22
24
A
max
1.836
46.64
1.836
46.64
1.937
49.20
2.137
54.28
2.337
59.36
2.537
64.45
2.758
70.05
2.958
75.13
3.002
76.25
C
max
0.750
19.05
0.859
21.82
1.031
26.19
1.156
29.36
1.281
32.54
1.391
35.33
1.531
38.89
1.656
42.06
1.777
45.14
G
max
0.561
14.25
0.686
17.43
0.811
20.60
0.936
23.78
1.061
26.95
1.186
30.13
1.311
33.30
1.436
36.75
1.561
39.65
Z
min
0.168
4.28
0.205
5.21
0.388
8.59
0.416
10.57
0.550
13.97
0.600
15.24
0.635
16.13
0.670
17.02
0.740
18.80
max
0.230
5.84
0.312
7.93
0.442
11.23
0.539
13.69
0.616
15.65
0.672
17.07
0.747
18.98
0.846
21.49
0.894
22.71
17
Plugs
5039
62GB-5039-10
SD/C 235 155 - X
SD/C 235 156 - X
Low profile, solder termination plug with 90°
screened cable outlet.
Shell
Size
10
5055
A
max
1.473
37.41
B
max
0.500
12.70
C
max
0.980
24.89
D
max
1.500
38.10
C
max
0.980
24.89
D
max
1.800
45.72
62GB-5055-10
SD/2 235 193 - X
Low profile solder termination plug with size 12
90°screened cable outlet.
Shell
Size
10
5056
A
max
1.800
45.72
B
max
0.655
16.64
62GB-5056-10
Audio plug with solder termination
Shell
Size
10
A
max
2.375
60.33
B
max
0.979 / 0.969
24.87 / 24.61
C
max
0.310
7.87
18
Plugs
5074
62GB-5074
Flange mounting push/pull plug with threaded shell to
accept standard cable accessories.
Shell
Size
10
12
14
A
max
0.912
23.17
0.912
23.17
0.912
23.17
B
max
1.125
28.57
1.218
30.93
1.312
33.32
C
L
0.866
22.00
0.969
24.61
1.062
26.97
9/16 - 24 NEF
9/16 - 24 NEF
9/16 - 24 NEF
19
Insert Orientations
For M I L-C-26482 and for
replacement purposes in
BS9522 FOO 17
Alternative position of insert
with socket contacts
(∅ counterclockwise)
Normal position
with pin contacts
Alternate position of insert
with pin contacts
(∅ clockwise)
Each diagram shows mating face of insert.
Orientation ∅ (degrees)
Insert
Arrangement
Normal
W
X
Y
Z
8-2
0
58
122
-
-
8-3
0
60
210
-
-
8-33
0
90
-
-
-
8-4
0
45
-
-
-
8-98
0
-
-
-
-
10-2
0
-
-
-
-
10-6
0
90
-
-
-
10-7
0
-
-
-
-
12-3
0
-
-
180
-
12-10
0
60
155
270
295
14-5
0
40
92
184
273
14-12
0
43
90
-
-
14-15
0
17
110
155
234
14-19
0
30
165
315
-
16-18
0
54
152
180
331
16-23
0
158
270
-
-
16-26
0
60
-
275
338
18-11
0
62
119
241
340
18-32
0
85
138
222
265
20-16
0
238
318
333
347
20-41
0
45
126
225
-
22-21
0
16
135
175
349
22-55
0
30
142
226
314
24-61
0
90
180
270
324
20
Key/Keyway
Orientations
For BS9522 F0017
Datum is always taken from major key or keyway. In
receptacles the major keyway always remains fixed
in relation to the mounting flange. For the
A',B,C,D',E and F orientations, the three bayonet
locations and associated minor keyways are rotated
complete, in accordance with the table below.
N.B.- The accompanying diagram shows a receptacle
shell, with keyways. Corresponding key orientations
for a mating plug shell are therefore always
clockwise.
N
A*
Values for ∝
(degrees)
B
C
D*
E
F
N
A*
Values for θ
(degrees)
B
C
D*
E
F
N
A*
Values for β
(degrees)
B
C
D*
E
F
8
105
92
-
-
118
118
82
35
35
-
-
35
30
50
75
75'
-
-
75
100
75
10
105
95
85
125
115
115
85
35
35
35
35
35
30
50
75
75
75
75
75
100
75
12
105
97
89
121
113
115
85
35
35
35
35
35
30
50
75
75
75
75
75
100
75
14
105
98
91
119
112
75
120
35
35
35
35
35
30
50
75
75
75
75
75
100
75
Shell
Size
16
105
99
93
117
111
75
120
35
35
35
35
35
30
50
75
75
75
75
75
100
75
18
105
100
95
115
110
75
120
35
35
35
35
35
30
50
75
75
75
75
75
100
75
20
105
100
95
115
110
75
120
35
35
35
35
35
30
50
75
75
75
75
75
100
75
22
105
101
97
113
109
7S
120
35
35
35
35
35
30
50
75
75
75
100
75
75
75
24
105
101
97
113
109
75
120
35
35
35
35
35
30
50
75
75
75
75
75
100
75
N
Values for ϕ (degrees)
Orientation
A*
B
C
D*
E
F
N
A*
8
50
50
50
50
50
30
45
60
47
-
-
73
73
47
10
50
50
50
50
50
30
45
60
50
40
80
70
70
50
12
50
50
50
50
50
30
45
60
52
44
76
68
70
50
14
50
50
50
50
50
30
35
60
53
46
74
67
30
75
16
50
50
50
50
50
30
35
60
54
48
72
66
30
75
18
50
50
50
50
50
30
35
60
55
50
70
65
30
75
20
50
50
50
50
50
30
35
60
55
50
70
65
30
75
22
50
50
50
50
50
30
35
60
56
52
68
64
30
75
24
50
50
50
50
50
30
35
60
56
52
68
64
30
75
Shell
Size
Values for ω (degrees)
Orientation
B
C
D*
E
F
* now inactive for new
designs but available for
replacement purposes.
Superseded in BS9522 F0017
by orientations E and F.
21
22