AOSMD AOZ6186

AOZ6186
High-Speed USB 2.0 (480 Mbps) DPDT Switch
General Description
Features
The AOZ6186 is a low-voltage high-speed Double-Pole,
Double-Throw (DPDT) switch for switching between two
USB 2.0 (480 Mbps) sources. The device features very
low on capacitance (5 pF typ.) and is designed to operate
from a single 1.65 V to 4.5 V supply. The AOZ6186
features an ultra-low on resistance (7 Ω typ.), and low
power consumption. The device also features fast
switching and guaranteed Break-Before-Make (BBM)
switching, assuring the switches never short the driver.
z Low On Resistance (RON) for 3.6 V supply (7 Ω)
z Low On Capacitance (CON) for 3.6 V supply (5 pF)
z Over-voltage tolerance (OVT) on all data ports up to
5.5 V
z QFN-10: 1.8 mm x 1.4 mm x 0.55 mm
z Broad 1.65 V to 4.50 V VCC operating range
z Wide –3 dB bandwidth: 960 MHz typ.
Applications
z Cell phone
z PDA
z Portable media player
Typical Application
AOZ6186
D1+
D+
D2+
D1–
D–
D2–
Control
OE
S
Rev. 1.1 July 2011
www.aosmd.com
Page 1 of 10
AOZ6186
Ordering Information
Part Number
Ambient Temperature Range
Package
Environmental
AOZ6186QT
-40 °C to +85 °C
QFN-10
Green Product
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information.
Pin Configuration
OE
8
VCC
9
S
10
Pin Description
D1–
D2–
7
6
Control
1
2
D1+
D2+
Pin Name
5
D–
4
GND
3
D+
Function
S
Control Input
OE
Output Enable
D1+, D1–, D2+, D2–,
D+, D-
Data Ports
Truth Table
QFN-10
(Top Thru View)
OE
S
D1+, D1–
D2+, D2–
1
X
Off
Off
0
0
On
Off
0
1
Off
On
Absolute Maximum Ratings
Exceeding the Absolute Maximum Ratings may damage the device.
Symbol
Parameter
Rating
VCC
Supply Voltage
-0.5 V to +5.5 V
VS
Switch Voltage
-0.5 V to VCC + 0.3 V
VIN
Input Voltage
-0.5 V to +4.6 V
IIK
Minimum Input Diode Current
-50 mA
ISW
Switch Current
100 mA
TSTG
Storage Temperature Range
-65 °C to +150 °C
TJ
Maximum Junction Temperature
TL
Lead Temperature (Soldering, 10 seconds)
ESD
Rev. 1.1 July 2011
+150 °C
Human Body Model
www.aosmd.com
+260 °C
All Pins
3000 V
I/O to GND
5000 V
Power to GND
5000 V
Page 2 of 10
AOZ6186
Maximum Operating Conditions
The device is not guaranteed to operate beyond the Maximum Operating Conditions.
Symbol
Parameter
VCC
Rating
Supply Voltage
0 V to VCC
Operating Temperature
-40 °C to +85 °C
VIN
Control Input Voltage
VSW
Switch Input Voltage
TA
1.65 V to 4.5 V
(1)
0 V to VCC
Note:
1. Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Unless otherwise indicated, specifications indicate a temperature range of -40 °C to +85 °C.
All typical values are at 25 °C unless otherwise specified.
Symbol
Parameter
VCL
Clamp Voltage
VIH
Input Voltage HIGH
VIL
Conditions
VCC (V)
IIN = -18 mA
Min.
Typ.
3.0
4.3
1.4
2.7 to 3.6
1.3
2.3 to 2.7
1.1
1.65 to 1.95
0.9
Input Voltage LOW
Max.
Units
-1.2
V
V
4.3
0.7
2.7 to 3.6
0.5
2.3 to 2.7
0.4
1.65 to 1.95
0.4
V
IIN
Control Input Leakage
VIN = 0 V to VCC
1.65 to 4.5
-1.0
1.0
μA
IOZ
Off State Leakage
VIN = 0 V to VCC
1.65 to 4.5
-1.0
1.0
μA
IOFF
Power OFF Leakage Current
(I/O ports)
VIN = 0 V to VCC
0
-1.0
1.0
μA
RON
On−Resistance
ION = 8 mA,
VIN = 0 V to 0.4 V
4.3
7
10
Ω
2.7 to 3.6
9
12
2.3 to 2.7
12
16
4.3
0.6
2.7 to 3.6
0.6
2.3 to 2.7
0.6
4.3
0.4
2.7 to 3.6
1.5
2.3 to 2.7
1.8
Δ RON
RFLAT (ON)
On−Resistance Matching
On−Resistance Flatness
ION = 8 mA,
VIN = 0 V to 0.4 V
ION = 8mA,
VIN = 0 V to 0.4 V
ICC
Quiescent Supply Current
IOUT = 0 mA
4.3
ICCT
Increase in ICC per Input
Control Voltage
VControl = 2.6 V
4.3
Rev. 1.1 July 2011
VControl = 1.8 V
www.aosmd.com
Ω
Ω
1.0
μA
3.0
7.0
μA
7.0
15.0
Page 3 of 10
AOZ6186
AC Electrical Characteristics
Unless otherwise indicated, specifications indicate a temperature range of -40 °C to +85 °C.
All typical values are at 25 °C unless otherwise specified.
Symbol
tON
tOFF
Conditions
VCC (V)
RL = 50 Ω, CL = 5 pF
Parameter
Turn-On Time
Turn-Off Time
Min.
Typ.
Max.
Units
3.6 to 4.3
18
35
ns
2.7 to 3.6
21
45
2.3 to 2.7
36
65
1.65 to 1.95
80
120
3.6 to 4.3
11
30
2.7 to 3.6
11
40
RL = 50 Ω, CL = 5 pF
2.3 to 2.7
14
55
1.65 to 1.95
59
100
ns
tPD
Propagation Delay
RL = 50 Ω, CL = 5 pF
1.65 to 4.5
0.25
ns
tBBM
Break-Before-Make
RL = 50 Ω, CL = 5 pF
1.65 to 4.5
6.2
ns
OIRR
Off Isolation
RL = 50 Ω, f = 240 MHz
1.65 to 4.5
-36
dB
XTALK
Crosstalk
RL = 50 Ω, f = 240 MHz
1.65 to 4.5
-40
dB
-3 dB Bandwidth
RL = 50 Ω, CL = 0 pF
1.65 to 4.5
960
MHz
BW
USB Hi-Speed AC Electrical Characteristics
Unless otherwise indicated, specifications indicate a temperature range of -40 °C to +85 °C.
All typical values are at 25 °C unless otherwise specified.
Parameter
tSK
Skew of Opposite Transitions
of the Same Output
RL = 50 Ω, CL = 5 pF
1.65 to 4.5
20
ps
Total Jitter
RL = 50 Ω, CL = 5 pF,
tr = tf = 500 ps (10% to 90%),
f = 480MHz,
PRBS = 215 – 1
1.65 to 4.5
200
ps
tJ
Conditions
VCC (V)
Symbol
Min.
Typ.
Max.
Units
Capacitance
Unless otherwise indicated, specifications indicate a temperature range of -40 °C to +85 °C.
All typical values are at 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
CIN
Control Pin Input Capacitance
1 MHz
CON
D+/D- On Capacitance
OE = 0V, f = 1 MHz
VCC (V)
1.7
3.3
4.7
OE = VCC, f = 1 MHz
OE = 0V, f = 10 MHz
Rev. 1.1 July 2011
www.aosmd.com
Max.
Units
pF
1.7
OE = 0V, f = 10 MHz
HSD1n/HSD2n Off Capacitance
Typ.
3.3
10 MHz
COFF
Min.
5.0
3.3
1.8
2.0
Page 4 of 10
AOZ6186
Eye Patterns
480-Mbps USB Signal Without AOZ6186QT
0.5
0.4
Differential Signal (V)
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Time (ns)
480-Mbps USB Signal With AOZ6186QT
0.5
0.4
Differential Signal (V)
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Time (ns)
Rev. 1.1 July 2011
www.aosmd.com
Page 5 of 10
AOZ6186
Typical Performance Characteristics
RDS(on) vs. Analog Voltage
RDS(on) vs. Analog Voltage
(at 25◦C)
24
70
20
60
16
RDS(on) (Ω)
RDS(on) (Ω)
(Vcc = 3.6V)
12
8
85◦C
25◦C
-45◦C
4
Vcc = 1.65V
Vcc = 2.3V
Vcc = 2.7V
Vcc = 3.6V
Vcc = 4.3V
50
40
30
20
10
0
0
0
0.5
1.0
1.5
2.0
2.5
Vanalog (V)
3.0
3.5
4.0
0
0
-1
-10
-2
-3
-4
-5
-6
0.1
1.0
1.5
2.0
2.5
Vanalog (V)
3.0
3.5
4.0
4.5
Xtalk and Off Isolation vs. Frequency
0
Xtalk, OIRR (dB)
Insertion Loss (dB)
Insertion Loss vs. Frequency
0.5
OIRR
Xtalk
-20
-30
-40
-50
-60
1
10
100
Frequency (MHz)
1,000
10,000
-70
0.1
1
10
100
Frequency (MHz)
1,000
10,000
Input Logic Voltage vs. ICCT
1.0E+00
1.0E-01
1.0E-02
ICCT (A)
1.0E-03
1.0E-04
1.0E-05
1.0E-06
1.0E-07
1.0E-08
1.0E-09
1.0E-10
0
Rev. 1.1 July 2011
0.5
1.0
1.5 2.0
2.5 3.0
Input Logic Voltage (V)
www.aosmd.com
3.5
4.0
4.5
Page 6 of 10
AOZ6186
AC Loading and Waveforms
Vcc
Control
Input
VOUT
VB
RL
50Ω
t
Vcc
R = t F = 2.5nS
50%
0V
t OFF
CL
5pF
VOUT
Switch
Output
GND
0.9 x VOUT
0.9 x VOUT
0
t ON
Logic input waveform are inverted for switches with opposite
logic sense
CL Includes Fixture and Stray Capacitance
Figure 1. Turn-On/Turn-Off Timing
Vcc
Dn+
VB
Vcc
D-
VOUT
DnRL
50 Ω
S
CL
5pF
GND
Control
Input
50%
0V
t
R = t F = 2.5nS
VOUT
0.9 x VOUT
tD
CL Includes Fixture and Stray Capacitance
Figure 2. Break-Before-Make Timing
Network
Analyzer
Vcc
Dn-
VIN
Dn+
VOUT
50Ω
D-
Network
Analyzer
Vcc
Source
Signal
50Ω
Dn-
D-
VIN
Source
Signal
50Ω
VOUT
50Ω
S
Vcc or 0V
+
S
50Ω
Vcc or 0V
+
50Ω
GND
GND
Figure 4. Crosstalk
Figure 3. Off Isolation
Vcc
Vcc
10nF
Network Analyzer
Dn+ or
Dn-
50Ω
Source
Signal
D-
+
Figure 5. Bandwidth
Rev. 1.1 July 2011
S
Capacitance
Meter
S
50Ω
D-
GND
f = 1MHz
Dn+ or
Dn-
0V
or
Vcc
GND
Figure 6. ON/Off Capacitance Measurement
www.aosmd.com
Page 7 of 10
AOZ6186
Package Dimensions, QFN 1.8x1.4, 10L
E
Pin #1 ID
0.1x 45
e
L (x6)
e
Pin #1 Dot
by Marking
D
L1 (x4)
Top View
b
Bottom View
A
SIDE VIEW
A1
c
RECOMMENDED LAND PATTERN
1.80
1.00
0.60
0.40
Dimensions in millimeters
Symbols
A
A1
b
0.20
1.00
1.40
0.35
0.40
0.52
0.20
c
D
E
e
L
L1
Min.
0.50
0.00
0.15
Nom.
0.55
—
0.20
Max.
0.60
0.05
0.25
0.152 REF.
1.40
1.45
1.80
1.85
0.40 BSC
0.35
0.40
0.45
0.475 0.525 0.575
1.35
1.75
Dimensions in inches
Symbols
A
A1
b
c
D
E
e
L
L1
Min.
0.020
0.000
0.006
Nom.
0.022
—
0.008
Max.
0.024
0.002
0.010
0.006 REF.
0.053 0.055 0.057
0.069 0.071 0.073
0.016 BSC
0.014 0.016 0.018
0.019 0.021 0.023
0.20
UNIT: mm
Notes:
1. Controlling dimension is millimeter. Converted inch dimensions are not necessarily exact.
Rev. 1.1 July 2011
www.aosmd.com
Page 8 of 10
AOZ6186
Tape and Reel Dimensions, QFN 1.8x1.4, 10L
Carrier Tape
D0
P1
D1
E1
K0
E2
E
B0
P2
P0
T
Feeding Direction
A0
UNIT: mm
Package
QFN 1.8 x 1.4
A0
1.90
±0.05
B0
1.70
±0.05
K0
D0
D1
1.00
1.50
0.50
±0.05 +0.10/-0 ±0.05
E
E1
8.00
1.75
+0.20/-0.10 ±0.10
E2
3.50
±0.05
P0
4.00
±0.10
P1
P2
4.00
2.00
±0.10 ±0.05
T
0.254
±0.02
Reel
W1
S
G
N
M
K
V
H
R
W
UNIT: mm
Tape Size Reel Size
8mm
ø178
M
ø178.0
±1.0
N
ø70.5
±1.0
W
9.0
±0.5
W1
11.8
±1.1
H
ø13.0
+0.5/-0.2
K
10.25
±0.1
S
2.4
±0.1
G
ø9.8
R
N/A
V
N/A
Leader/Trailer and Orientation
Trailer Tape
300mm min.
Rev. 1.1 July 2011
Components Tape
Orientation in Pocket
www.aosmd.com
Leader Tape
500mm min.
Page 9 of 10
AOZ6186
Part Marking
AOZ6186QT
(QFN-10)
Product Number Code
G
1
BH
36
Assembly Lot Code and
Assembly Location Code
Week Code and
Year Code
This datasheet contains preliminary data; supplementary data may be published at a later date.
Alpha & Omega Semiconductor reserves the right to make changes at any time without notice.
LIFE SUPPORT POLICY
ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
Rev. 1.1 July 2011
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
www.aosmd.com
Page 10 of 10