A-POWER AP9560GS-HF

AP9560GS-HF
Halogen-Free Product
Advanced Power
Electronics Corp.
P-CHANNEL ENHANCEMENT MODE
POWER MOSFET
▼ Low On-resistance
D
▼ Simple Drive Requirement
▼ Fast Switching Characteristic
▼ RoHS Compliant & Halogen-Free
BVDSS
-40V
RDS(ON)
12.5mΩ
ID
G
-51A
S
Description
Advanced Power MOSFETs from APEC provide the designer with the best
combination of fast switching, ruggedized device design, low on-resistance
and cost-effectiveness.
G D
S
TO-263(S)
The TO-263 package is widely preferred for commercial-industrial surface
mount applications and suited for low voltage applications such as DC/DC
converters.
Absolute Maximum Ratings
Parameter
Symbol
Rating
Units
VDS
Drain-Source Voltage
-40
V
VGS
Gate-Source Voltage
+20
V
[email protected]=25℃
Continuous Drain Current, VGS @ 10V
-51
A
[email protected]=100℃
Continuous Drain Current, VGS @ 10V
-32
A
1
IDM
Pulsed Drain Current
-200
A
[email protected]=25℃
Total Power Dissipation
54.3
W
[email protected]=25℃
Total Power Dissipation
3.13
W
TSTG
Storage Temperature Range
-55 to 150
℃
TJ
Operating Junction Temperature Range
-55 to 150
℃
Thermal Data
Symbol
Rthj-c
Rthj-a
Parameter
Maximum Thermal Resistance Junction-case
3
Maximum Thermal Resistance, Junction-ambient (PCB mount)
Data and specifications subject to change without notice
Value
Units
2.3
℃/W
40
℃/W
1
201108231
AP9560GS-HF
Electrical [email protected]=25oC(unless otherwise specified)
Symbol
Parameter
Test Conditions
Min.
Typ.
Max. Units
BVDSS
Drain-Source Breakdown Voltage
VGS=0V, ID=-250uA
-40
-
-
V
RDS(ON)
Static Drain-Source On-Resistance2
VGS=-10V, ID=-30A
-
-
12.5
mΩ
VGS=-4.5V, ID=-20A
-
-
16
mΩ
VGS(th)
Gate Threshold Voltage
VDS=VGS, ID=-250uA
-1
-
-3
V
gfs
Forward Transconductance
VDS=-10V, ID=-30A
-
64
-
S
IDSS
Drain-Source Leakage Current
VDS=-32V, VGS=0V
-
-
-10
uA
IGSS
Gate-Source Leakage
VGS= +20V, VDS=0V
-
-
+100
nA
Qg
Total Gate Charge
ID=-30A
-
42
67
nC
Qgs
Gate-Source Charge
VDS=-32V
-
6
-
nC
Qgd
Gate-Drain ("Miller") Charge
VGS=-4.5V
-
24
-
nC
td(on)
Turn-on Delay Time
VDS=-20V
-
10
-
ns
tr
Rise Time
ID=-30A
-
56
-
ns
td(off)
Turn-off Delay Time
RG=0.5Ω
-
41
-
ns
tf
Fall Time
VGS=-10V
-
17
-
ns
Ciss
Input Capacitance
VGS=0V
-
3420 5470
pF
Coss
Output Capacitance
VDS=-25V
-
375
-
pF
Crss
Reverse Transfer Capacitance
f=1.0MHz
-
350
-
pF
Rg
Gate Resistance
f=1.0MHz
-
2.1
-
Ω
Min.
Typ.
Source-Drain Diode
Symbol
Parameter
2
Test Conditions
Max. Units
VSD
Forward On Voltage
IS=-30A, VGS=0V
-
-
-1.2
V
trr
Reverse Recovery Time
IS=-10A, VGS=0V,
-
30
-
ns
Qrr
Reverse Recovery Charge
dI/dt=100A/µs
-
26
-
nC
Notes:
1.Pulse width limited by Max. junction temperature.
2.Pulse test
3.Surface mounted on 1 in2 copper pad of FR4 board
THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION.
USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED.
APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED
HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN.
2
AP9560GS-HF
160
200
-10V
-7.0 V
-6.0 V
-5.0 V
V G = - 4.0 V
-ID , Drain Current (A)
160
-10V
-7.0V
-6.0V
-5.0V
V G = - 4.0 V
T C = 150 o C
-ID , Drain Current (A)
T C = 25 o C
120
80
120
80
40
40
0
0
0
4
8
12
0
16
2
-V DS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
6
8
10
12
Fig 2. Typical Output Characteristics
16
2.0
I D = -20 A
T C =25 ℃
I D = -30A
V G = -10V
1.8
14
1.6
Normalized RDS(ON)
RDS(ON) (mΩ )
4
-V DS , Drain-to-Source Voltage (V)
12
1.4
1.2
1.0
0.8
10
0.6
0.4
8
2
4
6
8
10
-50
0
50
100
150
T j , Junction Temperature ( o C)
-V GS , Gate-to-Source Voltage (V)
Fig 3. On-Resistance v.s. Gate Voltage
Fig 4. Normalized On-Resistance
v.s. Junction Temperature
30
1.6
Normalized -VGS(th) (V)
1.4
-IS(A)
20
T j =25 o C
T j =150 o C
10
1.2
1
0.8
0.6
0.4
0
0
0.2
0.4
0.6
0.8
1
1.2
-V SD , Source-to-Drain Voltage (V)
Fig 5. Forward Characteristic of
Reverse Diode
1.4
-50
0
50
100
150
o
T j , Junction Temperature ( C)
Fig 6. Gate Threshold Voltage v.s.
Junction Temperature
3
AP9560GS-HF
f=1.0MHz
5000
4000
8
V DS =-32V
I D =-30A
C (pF)
-VGS , Gate to Source Voltage (V)
10
6
C iss
3000
4
2000
2
1000
C oss
C rss
0
0
0
20
40
60
1
80
5
9
13
17
21
25
29
Q G , Total Gate Charge (nC)
-V DS , Drain-to-Source Voltage (V)
Fig 7. Gate Charge Characteristics
Fig 8. Typical Capacitance Characteristics
1000
Normalized Thermal Response (Rthjc)
1
Operation in this area
limited by RDS(ON)
-ID (A)
100
100us
10
1ms
o
T C =25 C
Single Pulse
10ms
100ms
DC
1
0.1
1
10
Duty factor=0.5
0.2
0.1
0.1
0.05
PDM
0.02
t
T
0.01
Duty factor = t/T
Peak Tj = PDM x Rthjc + T C
Single Pulse
0.01
100
0.00001
0.0001
0.001
0.01
0.1
1
10
-V DS , Drain-to-Source Voltage (V)
t , Pulse Width (s)
Fig 9. Maximum Safe Operating Area
Fig 10. Effective Transient Thermal Impedance
60
VG
-ID , Drain Current (A)
50
QG
40
-4.5V
QGS
30
QGD
20
10
Charge
Q
0
25
50
75
100
T C , Case Temperature (
125
o
150
C)
Fig 11. Maximum Continuous Drain
Current v.s. Case Temperature
Fig 12. Gate Charge Waveform
4