AZDISPLAYS ATM0900D1_13

AZ DISPLAYS
SPECIFICATIONS FOR
LIQUID CRYSTAL DISPLAY
CUSTOMER APPROVAL
※ PART NO. : ATM0900D1(AZ DISPLAYS) VER1.0
APPROVAL
COMPANY
CHOP
CUSTOMER
COMMENTS
AZ DISPLAYS ENGINEERING APPROVAL
DESIGNED BY
CHECKED BY
APPROVED BY
Record of Revision
Version
Revise Date
V1.0
2012-11-21
Page
Content
First issued
Contents
1. General Specifications............................................................................................................ 1
2. Pin Assignment....................................................................................................................... 2
3. Operation Specifications ......................................................................................................... 5
3.1. Absolute Maximum Rating.............................................................................................. 5
3.1.1. Typical Operation Conditions.................................................................................. 6
3.1.2. Current Consumption ............................................................................................. 7
3.1.3. Backlight Driving Conditions ................................................................................... 7
3.2. Power Sequence ............................................................................................................ 8
3.3. Timing Characteristics .................................................................................................... 9
3.3.1. AC Electrical Characteristics .................................................................................. 9
3.3.2. Data Input Format................................................................................................. 10
3.3.3. Timing................................................................................................................... 11
4. Optical Specifications............................................................................................................ 12
5. Reliability Test Items ............................................................................................................. 16
6. General Precautions............................................................................................................. 17
6.1. Safety ........................................................................................................................... 17
6.2. Handling ....................................................................................................................... 17
6.3. Static Electricity ............................................................................................................ 17
6.4. Storage ......................................................................................................................... 17
6.5. Cleaning ....................................................................................................................... 17
7. Mechanical Drawing ............................................................................................................. 18
8. Package Drawing ................................................................................................................. 19
8.1 Packaging Material Table.............................................................................................. 19
8.2 Packaging Quantity ...................................................................................................... 19
8.3 Packaging Drawing....................................................................................................... 20
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
1. General Specifications
No.
Item
Specification
1
LCD size
9.0 inch(Diagonal)
2
Driver element
a-Si TFT active matrix
3
Resolution
800 × 3(RGB) × 480
4
Display mode
Normally White, Transmissive
5
Dot pitch
0.0825(W) × 0.2327(H) mm
6
Active area
198.000(W) × 111.696(H) mm
7
Module size
211.1(W)×126.5(H)×5.9(D) mm
8
Surface treatment
Anti-Glare
9
Color arrangement
RGB-stripe
10
Interface
Digital
11
Backlight power consumption
2.200W(Typ.)
12
Panel power consumption
0.360W(Typ.)
13
Weight
253g (Typ.)
Remark
Note 1
Note 1: Refer to Mechanical Drawing.
AZ DISPLAYS
1
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
2. Pin Assignment
TFT LCD Panel Driving Section
FPC Connector is used for the module electronics interface. The recommended model is
FH12A-50S-0.5SH manufactured by Hirose.
Pin No.
Symbol
I/O
1
VLED
-
Power for LED backlight
2
VLED
-
Power for LED backlight
3
GLED
-
Ground for LED backlight
4
GLED
-
Ground for LED backlight
5
GND
P
Power ground
6
VCOM
I
Common voltage
7
DVDD
P
Power for Digital Circuit
8
MODE
I
DE/SYNC mode select
9
DE
I
Data Input Enable
10
VS
I
Vertical Sync Input
11
HS
I
Horizontal Sync Input
12
B7
I
Blue data(MSB)
13
B6
I
Blue data
14
B5
I
Blue data
15
B4
I
Blue data
16
B3
I
Blue data
17
B2
I
Blue data
18
B1
I
Blue data
Note 2
19
B0
I
Blue data(LSB)
Note 2
20
G7
I
Green data(MSB)
21
G6
I
Green data
22
G5
I
Green data
23
G4
I
Green data
24
G3
I
Green data
25
G2
I
Green data
AZ DISPLAYS
Function
Remark
Note 1
2
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
26
G1
I
Green data
Note 2
27
G0
I
Green data(LSB)
Note 2
28
R7
I
Red data(MSB)
29
R6
I
Red data
30
R5
I
Red data
31
R4
I
Red data
32
R3
I
Red data
33
R2
I
Red data
34
R1
I
Red data
Note 2
35
R0
I
Red data(LSB)
Note 2
36
GND
P
Power Ground
37
DCLK
I
Sample clock
38
GND
P
Power Ground
39
L/R
I
Left / right selection
Note 4,5
40
U/D
I
Up/down selection
Note 4,5
41
VGH
P
Gate ON Voltage
42
VGL
P
Gate OFF Voltage
43
AVDD
P
Power for Analog Circuit
44
RESET
I
Global reset pin.
45
NC
-
No connection
46
VCOM
I
Common Voltage
47
DITHB
I
Dithering function
48
GND
P
Power Ground
49
NC
-
No connection
50
NC
-
No connection
Note 3
Note 6
Note 7
I: input, O: output, P: Power
Note 1: DE/SYNC mode select. Normally pull high.
When select DE mode, MODE=”1”, VS and HS must pull high.
When select SYNC mode, MODE= ”0”, DE must be grounded.
Note 2: When input 18 bits RGB data, the two low bits of R,G and B data must be
grounded.
Note 3: Data shall be latched at the falling edge of DCLK.
AZ DISPLAYS
3
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
Note 4: Selection of scanning mode
Setting of scan control input
Scanning direction
U/D
L/R
GND
DVDD
Up to down, left to right
DVDD
GND
Down to up, right to left
GND
GND
Up to down, right to left
DVDD
DVDD
Down to up, left to right
Note 5: Definition of scanning direction.
Refer to the figure as below:
Note 6: Global reset pin. Active low to enter reset state. Suggest to connect with an RC
reset circuit for stability. Normally pull high.
Note 7: Dithering function enable control, normally pull high.
When DITHB=”1”,Disable internal dithering function,
When DITHB=”0”,Enable internal dithering function,
AZ DISPLAYS
4
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
3. Operation Specifications
3.1.
Absolute Maximum Rating
(GND=AVSS=0V, Note 1)
Values
Item
Symbol
Unit
Remark
Min.
Max.
DVDD
-0.3
5.0
V
AVDD
-0.5
13.5
V
VGH
13.0
19.0
V
VGL
-12.0
-2.0
V
VGH-VGL
-
31.0
V
TOP
-20
70
℃
TST
-30
80
℃
LED Reverse Voltage
VR
-
1.2
V
Each LED
Note 2
LED Forward Current
IF
-
25
mA
Each LED
Power voltage
Operation Temperature
Storage Temperature
Note 1: The absolute maximum rating values of this product are not allowed to be exceeded
at any times. Should a module be used with any of the absolute maximum ratings
exceeded, the characteristics of the module may not be recovered, or in an extreme
case, the module may be permanently destroyed.
Note 2: VR Conditions: Zener Diode 20mA
AZ DISPLAYS
5
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
3.1.1.
Typical Operation Conditions
(GND=AVSS=0V, Note 1)
Values
Item
Symbol
Unit
Remark
Note 2
Min.
Typ.
Max.
DVDD
3.0
3.3
3.6
V
AVDD
10.2
10.4
10.6
V
VGH
16.3
17.0
17.7
V
VGL
-5.7
-5.0
-4.3
V
VCOM
3.2
4.2
5.2
V
Input logic high voltage
VIH
0.7 DVDD
-
DVDD
V
Input logic low voltage
VIL
0
-
0.3 DVDD
V
Power voltage
Input signal voltage
Note 4
Note 3
Note 1: Be sure to apply DVDD and VGL to the LCD first, and then apply VGH.
Note 2: DVDD setting should match the signals output voltage (refer to Note 3) of
customer’s system board.
Note 3: DCLK,HS,VS,RESET,U/D, L/R,DE,R0~R7,G0~G7,B0~B7,MODE,DITHB.
Note 4: Typical VCOM is only a reference value, it must be optimized according to each
LCM. Be sure to use VR.
AZ DISPLAYS
6
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
3.1.2.
Current Consumption
(GND=AVSS=0V)
Values
Item
Symbol
Unit
Remark
Min.
Typ.
Max.
IGH
-
0.3
1
mA
VGH =17.0V
IGL
-
0.3
1
mA
VGL = -5.0V
IDVDD
-
5.5
10
mA
VCC =3.3V
IAVDD
-
32
50
mA
AVDD =10.4V
Current for Driver
3.1.3.
Backlight Driving Conditions
Values
Item
Symbol
Min.
Typ.
Max.
Unit
Remark
Note 1
Voltage for LED backlight
VL
9.3
9.9
10.5
V
Current for LED backlight
IL
198
220
242
mA
LED life time
-
20,000
-
-
Hr
Note 2
Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and
IL =220mA.
Note 2: The “LED life time” is defined as the module brightness decrease to 50% original
brightness at Ta=25℃ and IL =220mA. The LED lifetime could be decreased if
operating IL is lager than 220 mA.
AZ DISPLAYS
7
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
3.2. Power Sequence
3.2.1.
Power on:
DVDD→
→VGL→
→VGH→
→Data→
→B/L
3.2.2.
Power off:
B/L→
→Data→
→VGH→
→VGL→
→DVDD
Note: Data include R0~R7, B0~B7, GO~G7, U/D, L/R, DCLK, HS,VS,DE.
AZ DISPLAYS
8
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
3.3.
Timing Characteristics
3.3.1.
AC Electrical Characteristics
Values
Item
Symbol
Unit
Min.
Typ.
Max.
HS setup time
Thst
8
-
-
ns
HS hold time
Thhd
8
-
-
ns
VS setup time
Tvst
8
-
-
ns
VS hold time
Tvhd
8
-
-
ns
Data setup time
Tdsu
8
-
-
ns
Data hole time
Tdhd
8
-
-
ns
DE setup time
Tesu
8
-
-
ns
DE hole time
Tehd
8
-
-
ns
DVDD Power On Slew rate
TPOR
-
-
20
ms
RESET pulse width
TRst
1
-
-
ms
DCLK cycle time
Tcoh
20
-
-
ns
DCLK pulse duty
Tcwh
40
50
60
%
AZ DISPLAYS
Remark
From 0 to 90%
DVDD
9
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
3.3.2.
AZ DISPLAYS
Data Input Format
10
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
3.3.3. Timing
Values
Item
Symbol
Unit
Min.
Typ.
Max.
Horizontal Display Area
thd
-
800
-
DCLK
DCLK Frequency
fclk
26.4
33.3
46.8
MHz
One Horizontal Line
th
862
1056
1200 DCLK
HS pulse width
thpw
1
-
40
DCLK
HS Blanking
thb
46
46
46
DCLK
HS Front Porch
thfp
16
210
354 DCLK
Remark
Values
Item
Symbol
Unit
Min.
Typ.
Max.
Vertical Display Area
tvd
-
480
-
TH
VS period time
tv
510
525
650
TH
VS pulse width
tvpw
1
-
20
TH
VS Blanking
tvb
23
23
23
TH
VS Front Porch
tvfp
7
22
147
TH
AZ DISPLAYS
Remark
11
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
4. Optical Specifications
Values
Item
Viewing angle
(CR≥ 10)
Symbol
Condition
Unit
Min.
Typ.
Max.
θL
Φ=180°(9 o’clock)
60
70
-
θR
Φ=0°(3 o’clock)
60
70
-
Remark
degree
Note 1
θT
Φ=90°(12 o’clock)
40
50
-
θB
Φ=270°(6 o’clock)
60
70
-
TON
-
10
20
msec
Note 3
TOFF
-
15
30
msec
Note 3
CR
400
500
-
-
Note 4
0.26
0.31
0.36
-
WY
0.28
0.33
0.38
-
Note 2
Note 5
Note 6
Luminance
L
200
250
-
cd/m²
Note 6
Luminance
uniformity
YU
70
75
-
%
Note 7
Response time
Contrast ratio
WX
Color chromaticity
Normal
θ=Φ=0°
Test Conditions:
1. VCC=3.3V, IL=220mA (Backlight current), the ambient temperature is 25℃.
2. The test systems refer to Note 2.
AZ DISPLAYS
12
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
Note 1: Definition of viewing angle range
Normal line
θ=Φ=0°
Φ=90°
12 o’clock direction
θR
θL
θT
θB
Φ=180°
Φ=0°
Active Area
Φ=270°
6 o’clock direction
Fig. 4-1 Definition of viewing angle
Note 2: Definition of optical measurement system.
The optical characteristics should be measured in dark room. After 30 minutes
operation, the optical properties are measured at the center point of the LCD screen.
(Response time is measured by Photo detector TOPCON BM-7, other items are
measured by BM-5A/Field of view: 1° /Height: 500mm.)
Photo detector
Normal line
θ=Φ=0°
Φ=90°
12 o’clock direction
500mm
Φ=180°
Φ=0°
Active Area
LCD Panel
Φ=270°
6 o’clock direction
Fig. 4-2 Optical measurement system setup
AZ DISPLAYS
13
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
Note 3: Definition of Response time
The response time is defined as the LCD optical switching time interval between
“White” state and “Black” state. Rise time (TON) is the time between photo detector output
intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo
detector output intensity changed from 10% to 90%.
Photo detector output
(Relative value)
White (TFT OFF)
Black (TFT ON)
White (TFT OFF)
100%
90%
10%
0%
TON
TOFF
Fig. 4-3 Definition of response time
Note 4: Definition of contrast ratio
Contrast ratio (CR) =
Luminance measured when LCD on the " White" state
Luminance measured when LCD on the " Black" state
Note 5: Definition of color chromaticity (CIE1931)
Color coordinates measured at center point of LCD.
Note 6: All input terminals LCD panel must be ground while measuring the center area of
the panel. The LED driving condition is IL=220mA .
AZ DISPLAYS
14
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
Note 7: Definition of Luminance Uniformity
Active area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every
measuring point is placed at the center of each measuring area.
Luminance Uniformity (Yu) =
L-------Active area length
B min
B max
W----- Active area width
L/6
L/3
L/3
W/3
W
W/3
W/6
L
Fig. 4-4 Definition of measuring points
Bmax: The measured maximum luminance of all measurement position.
Bmin: The measured minimum luminance of all measurement position.
AZ DISPLAYS
15
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
5. Reliability Test Items
(Note3)
Item
Test Conditions
240hrs
Remark
High Temperature Storage
Ta = 80℃
Low Temperature Storage
Ta = -30℃
240hrs
Note 1,Note 4
High Temperature Operation
Ts = 70℃
240hrs
Note 2,Note 4
Low Temperature Operation
Ta = -20℃
240hrs
Note 1,Note 4
Operate at High Temperature
and Humidity
+60℃, 90%RH
240hrs
Note 4
Thermal Shock
-30℃/30 min ~ +80℃/30 min for a total 100
cycles, Start with cold temperature and end
with high temperature.
Vibration Test
Frequency range:10~55Hz
Stroke:1.5mm
Sweep:10Hz~55Hz~10Hz
2 hours for each direction of X. Y. Z.
(6 hours for total)
Mechanical Shock
100G 6ms,±X, ±Y, ±Z 3 times for each
direction
Package Vibration Test
Random Vibration :
0.015G*G/Hz from 5-200HZ, -6dB/Octave
from 200-500HZ
2 hours for each direction of X. Y. Z.
(6 hours for total)
Package Drop Test
Height:60 cm
1 corner, 3 edges, 6 surfaces
Electro Static Discharge
± 2KV,
Note 1,Note 4
Note 4
Human Body Mode, 100pF/1500Ω
Note 1: Ta is the ambient temperature of samples.
Note 2: Ts is the temperature of panel’s surface.
Note 3: In the standard condition, there shall be no practical problem that may affect the
display function. After the reliability test, the product only guarantees operation,
but don’t guarantee all of the cosmetic specification.
Note 4: Before cosmetic and function test, the product must have enough recovery time,
at least 2 hours at room temperature.
AZ DISPLAYS
16
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
6. General Precautions
6.1.
Safety
Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your
skin or clothes, wash it off immediately by using soap and water.
6.2.
Handling
1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to
excessive force on its surface.
2. The polarizer attached to the display is easily damaged. Please handle it carefully
to avoid scratch or other damages.
3. To avoid contamination on the display surface, do not touch the module surface
with bare hands.
4. Keep a space so that the LCD panels do not touch other components.
5. Put cover board such as acrylic board on the surface of LCD panel to protect panel
from damages.
6. Transparent electrodes may be disconnected if you use the LCD panel under
environmental conditions where the condensation of dew occurs.
7. Do not leave module in direct sunlight to avoid malfunction of the ICs.
6.3.
Static Electricity
1. Be sure to ground module before turning on power or operating module.
2. Do not apply voltage which exceeds the absolute maximum rating value.
6.4.
Storage
1. Store the module in a dark room where must keep at 25±10℃ and 65%RH or less.
2. Do not store the module in surroundings containing organic solvent or corrosive
gas.
3. Store the module in an anti-electrostatic container or bag.
6.5.
Cleaning
1. Do not wipe the polarizer with dry cloth. It might cause scratch.
2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might
permanent damage to the polarizer.
AZ DISPLAYS
17
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
7. Mechanical Drawing
AZ DISPLAYS
18
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
8. Package Drawing
8.1 Packaging Material Table
No.
LCM
Module
2
Partition
4
5
Quantity
211.1 × 126.5 × 5.9
0.253
30pcs
512 × 349 × 226
1.250
1set
510 X 350
0.071
2pcs
349 × 118 × 44
0.035
4pcs
PE
700 × 530
0.060
1pcs
ATM0900D1
Item
1
3
Dimensions(mm)
Unit
Weight
(kg)
Model
(Material)
Corrugated
Paper
Corrugated
Bar
Dust-Proof
Bag
BC Corrugated
paper
B Corrugated
paper
B Corrugated
paper
6
A/S Bag
PE
240 ×230
0.006
30pcs
7
Carton
Co rru ga t e d
pap e r
530 × 355 × 255
1.100
1 p cs
8
Total weight
Remark
10.462Kg±5%
8.2 Packaging Quantity
Total LCM quantity in Carton: no. of
AZ DISPLAYS
Partition
2 Rows × quantity per Row 15
= 30
19
ATM0900D1(AZ DISPLAYS) TFT MODULE VER1.0
8.3 Packaging Drawing
AZ DISPLAYS
20