CONEXANT CX93040

Preliminary Information
This document contains information on a new product. The parametric information,
although not fully characterized, is the result of testing initial devices.
CX93040-1x CSPMxx
V.92/V.34/V.32bis Controllered SPI Modem with CX20548
SmartDAA® for Embedded Applications
The CX93040 modem, paired with the CX20548 SmartDAA® 4 Line Side Device
(LSD), is well suited to embedded applications such as Point of Sale (POS)
terminals, Set-Top Boxes (STB), Video Recorders, Meters, Security Systems,
Remote Site Management, and other applications that require robust dial-up
connectivity. Integrating a microcontroller, digital signal processor, memory, and
a SmartDAA® interface onto a single die, the CX93040 is easily adaptable for
just about any application, completely independent of the host processor and
operating system. In addition, the SmartDAA interface hooks directly to
Conexant's field-proven, market-leading fourth-generation silicon DAA,
supporting the lowest component line-side design and permitting a single-cost,
optimized SKU capable of meeting and exceeding global PTT standards.
Setting the CX93040 apart is the addition of an SPI interface, which allows for
maximum flexibility in the main processor. Found in virtually every SoC and/or
main processor, SPI is a shared bus working in a master/slave configuration,
and requiring only one set of I/Os for all peripherals that attach to the SPI bus.
This is in stark contrast to a UART port for an RS232 serial bus, which requires a set
of dedicated I/Os for each peripheral. Using an SPI bus allows the CX93040 to
eliminate a UART port on the SoC and its associated pins that would have otherwise
been dedicated for the modem.
The CX93040 is offered in three versions, 1) V.32bis, 2) V.34 and 3) V.92.
Furthermore, CX93040 leverages three generations of firmware expertise and knowhow that, coupled with Conexant’s market-leading and field-proven DAA and full
reference design kits, makes this modem the easiest, most mature and robust
modem in which to design.
The CX93040 Controllered SPI modem device set is available in the smallest
footprint and environmentally friendly, RoHS/green-compliant packages consisting of
a CX93040 SPI interface modem device in a 6x6mm 20-pin Quad Flat-No Lead
(QFN) package and CX20548 SmartDAA 4 LSD in a 4mmx4mm 16-pin QFN
package.
Key Features
Applications
‹
‹
‹
‹
‹
‹
Point of Sale (POS) terminals
Set Top Boxes (STB)
Security Systems
Remote Site Management
Meters
Videophone Terminals
Benefits
SPI Interface
Uses I/O shared with other SPI peripherals - alleviates
need for host to support traditional serial interface
Controller-based modem, no external memory
required
OS independent and minimal host intervention
Up to V.92
Robust dial-up connectivity
Description
Robust and field proven CID support
Meets performance criteria needed for Set-Top Box
applications
V.92/V.34/V.32bis Controllered SPI
Modem with CX20548 SmartDAA® for
Embedded Applications
Support for POS specific fast connect protocols
Compatibility with established POS server base.
SmartDAA support
Allows worldwide support with a single design
Optional serial NVRAM interface
Allows additional country profile storage and code
upgrades
Reference design supporting 6KV
Quick time to market and low system cost
Part Number CX93040-1x CSPMxx
CX93040-1x CSPMxx Features
‹
‹
‹
‹
‹
‹
Slave SPI Interface Modulations and
protocols
– ITU-T V.92: Quick Connect, Modemon-Hold and PCM upstream
– V.90/V.34/V.32bis/V.32
– V.22bis/V.22/V.23/V.21
– V.23 reverse, V.23 half-duplex
– Bell 212A/Bell 103
– V.29 FastPOS and V22 Fast
Connect
– SIA Protocol and Contact ID for
alarm equipment
– V.80 Synchronous Access Mode
– V.17/V.29 Fax Class 1/1.0 and Fax
Class 2
V.44/V.42bis/MNP5 data compression
V.42/MNP2-4 Error correction
Call waiting (CW) detection for selected
countries
Hardware and software flow control and
speed buffering
Embedded and upgradable 63 country
profiles
‹
‹
‹
‹
‹
‹
Optional serial NVRAM interface for
country profile storage and code
upgrades
Full-duplex 8-bit/16-bit PCM voice passthrough mode
28.224 MHz XTAL or clock input
Worldwide operation
– Complies to TBR21 and other
country requirements
– Type I Caller ID (CID) decoding
– Type II Caller ID snooping
– Call progress, blacklisting
– Meets worldwide DC mask
requirements
Low power and voltage
– Single +3.3 V supply
– Low power consumption mode
– +3.3 V I/O level
Compact, robust board design
– Reference design files provided for
quick time-to-market
– Reference design tested for PTT
and TBR.21 approvals
– Small, low-profile modem packages
– Reference design supports 6KV
isolation
SmartDAA Features
‹
‹
‹
‹
‹
‹
‹
Extension pick-up detection
Digital line protection
Line reversal detection
Remote hang-up detection
Worldwide compliance
CX20548 SmartDAA 4 LSD in a 16-pin
QFN
Worldwide support with a single design
DAA Hardware
CX93040-1x Modem
20-Pin QFN
SPI Bus
Interface
28.224 MHz
Crystal or Clock
Source
Telephone
Line
DTE/Host
Interface
RAM
CX20548
SmartDAA 4
Line Side Device (LSD)
16-Pin QFN
Digital Isolation
Barrier (DIB)
MCU/DSP
SmartDAA
Interface
ROM
Line Side
DIB
Interface
(LSDI)
Codec
Telephone
Line
Interface
External
Discrete
Components
TIP
RING
Optional
NVRAM
Conexant Product Portfolio
Conexant’s comprehensive product portfolio includes solutions for imaging, audio, video surveillance, and embedded modem applications
© 2011 Conexant Systems, Inc. All Rights Reserved. Conexant and the
Conexant logo are registered trademarks of Conexant Systems, Inc. All
other trademarks are owned by their respective owners. Although Conexant
strives for accuracy in all its publications, this material may contain errors or
omissions and is subject to change without notice. THIS MATERIAL IS
PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED
.WARRANTIES, INCLUDING MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT. Conexant shall not
be liable for any special, indirect, incidental or consequential damages as a
result of its use.
www.conexant.com
General Information:
U.S. and Canada: (888) 855-4562
International: 1+ (949) 483-3000
Headquarters
4000 MacArthur Blvd.
Newport Beach, CA 92660
Doc# PBR-202792