Bussmann® Supplementary Fuseblocks BM Series Type M, For ⁄‹Ω£™∑ ≈ 1⁄Ω™∑ Fuses 600 Volt AC, ⁄Ω¡º to 30 Amps Dimensional Data All dimensions (±0.015) 1 POLE 3.000" + 0.015" (76.20mm + 0.38mm) 0.828" + 0.015" (21.03mm + 0.38mm) Catalog Symbol: BM Series Type M Supplementary Fuseblocks Ampere Rating: ⁄Ω¡º to 30 Amperes Voltage Rating: 600 Volts AC Withstand Rating: 10,000 A RMS Sym. or interrupting rating of the fuse used, whichever is lower. Agency Information: U.L. Recognized, U.L. 512, Guide IZLT2, File E14853 CSA Certified, C22.2 No. 39, Class 6225-01, File 47235 For use with any ⁄‹Ω£™∑ ≈ 1⁄Ω™∑ Fuses (Bussmann KTK, FNQ, FNM, BAF, BAN and AGU) U.L. Flammability: 94 V0 Material: Thermoplastic 0.360" (9.14mm) Amps ⁄Ω¡º to 30 Poles 1 2 3 Pressure Plate w/ Quick Connect* BM6031PQ BM6032PQ BM6033PQ Box Lug BM6031B BM6032B BM6033B Fig. No. 1 2 3 0.425" 2 POLE (10.80mm) 1.625" + 0.015" 0.765" (41.28mm + 0.38mm) Catalog Data (600V) Terminal Type Screw with Quick Connect* BM6031SQ BM6032SQ BM6033SQ 0.200" + 0.003" (5.08mm + 0.08mm) 3 POLE (19.43mm) .169" ≈ .210" 4.29mm ≈ 5.33mm Typ. 2 0.200" + 0.003" (5.08mm + 0.08mm) 2.375" + 0.015" .750" (60.33mm + 0.38mm) Wire Range CU Only #10-#18 #10-#18 #6-#14 .172" 0.200" + 0.003" (5.08mm + 0.08mm) FUSEBLOCK LABEL LABEL (EXAMPLE (EXAMPLE SHOWN) SHOWN) FUSEBLOCK CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. + 0.015" 1.210" + 0.015" 1.210" + 0.38mm) (30.73mm + 0.38mm) (30.73mm 1.530" (38.86mm) (19.05mm) (4.37mm) Typ. 2 * QUICK CONNECT RATED FOR 20A MAXIMUM. 0.425" (10.80mm) Buss®® Buss BUSSMANN BUSSMANN COOPER INDUSTRIES INDUSTRIES COOPER ST. LOUIS, LOUIS, MO MO 63178 63178 ST. MADE IN IN U.S.A. U.S.A. MADE BM6032SQ BM6032SQ REPLACES M60030-2SQ M60030-2SQ REPLACES 30A 30A 600V 600V QUIK CON. CON. 20A 20A QUIK CU ONLY ONLY CU 10 -14 -14 20 LB LB IN. IN. 10 20 R R 10,000A RMS RMS SYM SYM 10,000A WITHSTAND RATING RATING WITHSTAND XXXXX XXXXX The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 1-16-02 SB02003 Form No. BM Series Page 1 of 1 BIF Doc #1104