CRYDOM CL240D05_1208

CL Series
• Ratings of 5A and10A @ 24-280 VAC
• UL Approved, CE and RoHS Compliant
• AC or DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
PRODUCT SELECTION
Control Voltage
3-32 VDC
90-250 VAC
5A
10A
CL240D05
CL240A05
CL240D10
CL240A10
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2)
Maximum Load Current [Arms] (3)
Minimum Load Current [mArms]
Maximum Surge Current (50/60Hz, 1 Cycle) [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum I² t for Fusing (50/60Hz, 1/2 cycle) [A² sec]
Minimum Power Factor (with Maximum Load)
5A
10A
24-280
600
7
500
5
150
42/50
1.8
3.0
36/30
0.5
24-280
600
7
500
10
150
84/100
1.5
2.5
48/40
0.5
INPUT SPECIFICATIONS (1)
Description
CL240Dxx
CL240Axx
Control Voltage Range
Maximum Reverse Voltage
Maximum Turn-On Voltage
Minimum Turn-Off Voltage
Typical Input Current @ max turn-on voltage
Nominal Input Impedance [Ohms]
Maximum Turn-On Time [msec] (4)
Maximum Turn-Off Time [msec]
3-32 VDC
-32
3.0 VDC
1.0 VDC
14 mA
Current Limited
1/2 Cycle
1/2 Cycle
90-250 Vrms
90 Vrms
10 Vrms
10 mA
Current Limited
50
50
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Terminals
Input Terminal Screw Torque Range:
Output Terminal Screw Torque Range:
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) When mounted to the proper size heat sink (see derating curves)
4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models)
WIRING DIAGRAM
Parameters
4000 Vrms
109 Ohm
8 pF
-30 to 80 °C
-40 to 125 °C
2.8 oz (79g)
Hardware Furnished, Unmounted
8-10 in lb (0.9-1.1Nm)
18-20 in lb (2-2.2Nm)
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
E46203
Rev. 120811
ANNEX - ENVIROMENTAL INFORMATION