date 08/13/2012 page 1 of 5 SERIES: ETMA 200W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY FEATURES • • • • • • • • up to 200 W power universal input (90~264 Vac) single regulated output from 12~48 V over voltage, overload and short circuit protections full medical safety approvals active PFC level V efficiency custom designs available RoHS ® IEC 60601-1 EN 60601-1 output voltage output current output power ripple1 (Vdc) max (A) max (W) max (mVp-p) ETMA1201666U 12 16.66 200 240 V ETMA1601250U 16 12.5 200 300 V ETMA1901053U 19 10.53 200 300 V MODEL efficiency level ETMA2001000U 20 10 200 300 V ETMA240833U 24 8.33 200 300 V ETMA360555U 36 5.55 200 300 V ETMA480416U 48 4.16 200 300 V Notes: 1. At full load, 100 ~ 240 Vac input, 20 MHz bandwidth oscilloscope, each output terminated with 10 μF aluminum electrolytic and 0.1 μF ceramic capacitors. PART NUMBER KEY ETMA1201666U C - P51 - WP - CXX Base Number example of 12 Vdc, 16.66 A Reserved for Custom Configurations DC Plug Type Input Cable: C = included blank = no cable Factory Designation cui.com CUI Inc │ SERIES: ETMA 200W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY date 08/13/2012 │ page 2 of 5 INPUT parameter conditions/description min voltage frequency current at 90 Vac, 60 Hz inrush current at 230 Vac, cold start max units 90 typ 264 Vac 47 63 Hz 3 A no load power consumption 150 A 0.5 W max units OUTPUT parameter conditions/description min line regulation ±1 load regulation hold-up time typ % ±5 at 115 Vac % 16 temperature coefficient ms ±0.05 %/°C PROTECTIONS parameter conditions/description over voltage protection 12 V output 16, 20 V outputs 19 V output 24, 36 V outputs 48 V output 110 110 111 110 110 133 130 137 125 120 % % % % % overload protection shutdown and auto restart 110 160 % short circuit protection continuous, auto restart max units 5,656 2,121 Vdc Vdc SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output for 2 seconds input to frame ground for 2 seconds min typ insulation resistance input to output, at 500 Vdc input to frame ground, at 500 Vdc safety approvals UL/cUL (UL 60601-1), EN 60601-1, IEC 60601-1 EMI/EMC FCC 47 CFR Part 18, CE, EN 61000-3-(2, 3), EN 55011, IEC 61000-4-(2, 3, 4, 5, 6, 8, 11) leakage current earth, at 264 Vac enclosure, at 264 Vac MTBF at 25°C, max. load RoHS compliant yes 20 20 MΩ MΩ 190 10 300 100 140,000 μA μA hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature humidity non-condensing cui.com max units 0 typ 50 °C -10 70 °C 20 90 % CUI Inc │ SERIES: ETMA 200W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY date 08/13/2012 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 7.42 x 4.11 x 2.36 (188.5 x 104.5 x 60 mm) min input plug IEC320 / C14 weight typ units: mm 104.5 0.5 60.0 0.5 188.5 0.5 cui.com units inch 1.06 MECHANICAL DRAWING max kg CUI Inc │ SERIES: ETMA 200W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY date 08/13/2012 │ page 4 of 5 DC CORD PIN 2 Blue (GND) PIN 4 Black (GND) [2464#16AWG 4C+1(16AWG)] PIN 3 Yellow (+Vo) D.W. (GND) SECTIONAL DRAWING Core 14.2*8.0*28.5mm TERMINAL ø3.2*2 PIN 1 Red (+Vo) 4P POWER DIN FRONT VIEW UL Heat Shrinkable Tube Black+Blue+D.W. Yellow+Red 4PIN POWER DIN COMPONENT LIST 1. Cable: color black, UL/CSA 2464 80/90°C 300V 16 AWG X 4C+Aluminum Shield (16AWG) 2. PVC Wire: color: blue/black/yellow/red 3. Connector: 4PIN power DIN or EQ 4. 4PIN power DIN (female) MDP-002-4PIN (P530600004F0001) AC CORD (IEC 320 C13) (NEMA 5-15P Hospital Grade) 183±5cm SPECIFICATION: 1) Length: 1.83m 2) Color: black 3) Plug: SL-22 (A)10 (V)125 Approval: UL/cUL 4) Connector: SL-3(A)10 (V)125 Approval: UL/cUL 5) Cable: SJT 18AWG/3C Approval: UL/CSA 20±2cm cui.com CUI Inc │ SERIES: ETMA 200W │ DESCRIPTION: MEDICAL AC-DC POWER SUPPLY date 08/13/2012 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 03/05/2012 1.01 V-Infinity branding removed, safety and EMI/EMC data updated 08/13/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.