DCCOM B05AF

B05AF
THRU
B05MF
DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 0.5 / 0.8 Ampere
FEATURES
*
*
*
*
*
*
Ideal for automated placement
Low profile space
Low forward voltage grop
Low leakage current
High forward surge capability
Glass passivated junction
MBF
.106(2.70)
.090(2.30)
MECHANICAL DATA
*
*
*
*
*
*
Case: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: MIL-STD-202E, Method 208 guaranteed
Polarity: Symbols molded or marked on body
Mounting position: Any
Weight: 0.12 gram
.043(1.10)
.020(0.50)
.276(7.00)
.260(6.60)
.236(6.00)
.220(5.60)
.004(0.10)
Max.
.016(0.41)
.006(0.15)
.035(0.90)
.020(0.50)
.197(5.00)
.181(4.60)
.063(1.60)
.047(1.20)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
SYMBOL
B05AF
B05BF
B05DF
B05GF
B05JF
B05KF
B05MF
UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Bridge Input Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
o
Maximum Average Forward Output Current at T A = 30 C (Note 2 / 3)
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
0.5 / 0.8
Amps
I FSM
25
Amps
VF
1.0
Volts
Maximum DC Forward Voltage Drop per Bridge
Element at 0.4A DC
o
Maximum Reverse Current at rated
@T A = 25 C
DC Blocking Voltage per element
@T A = 125 o C
Typical Junction Capacitance ( Note1)
Typical Thermal Resistance (Note 2 / 3)
Operating and Storage Temperature Range
Volts
IO
IR
5.0
µAmps
100
CJ
13
RθJ A
85 / 70
T J, T STG
-50 to + 150
NOTES : 1. Measured at 1 MHZ and applied reverse voltage of 4.0 volts.
2. On glass epoxy P.C.B. with 0.05 x 0.05" (1.3x1.3mm) copper pads.
3. On aluminum substrate P.C.B. with an area of 0.8 x 0.8 “ (20x20mm) mounted on 0.05 x 0.05" (1.3x1.3mm) copper pads.
pF
0
C/W
0
C
RATING AND CHARACTERISTIC CURVES (B05AF THRU B05MF)
FIG. 1 - DERATING CURVE FOR OUTPUT
CURRENT
PEAK FORWARD SURGE CURRENT, (A)
AVERAGE FORWARD CURRENT, (A)
1.0
Aluminium Substrate
0.8
0.6
Glass
Epoxy
P.C.B.
0.4
0.2
Resistive or Inductive Lode
0
0
30
60
90
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
120
35
8.3ms Single Half Sine-Wave
JEDEC Method
30
25
20
15
10
0
150
1
10
AMBIENT TEMPERATURE, (oC)
NUMBER OF CYCLES AT 60 Hz
10
1.0
TJ = 25OC
0.1
Pulse Width = 300 µS
1% Duty Cycle
0.01
.2
.4
.6
.8
1.0
1.2
INSTANTANEOUS FORWARD VOLTAGE, (V)
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT, (uA)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
TJ = 125OC
100
TJ= 125oC
10
1.0
TJ= 75oC
.01
TJ= 25oC
0.01
10
20
40
60
80
100
120
PERCENT OF RATED PEAK REVERSE
VOLTAGE, (%)
DC COMPONENTS CO., LTD.
R
100
140