DT. www.daysemi.jp P-Channel 30-V (D-S) MOSFET FEATURES PRODUCT SUMMARY VDS (V) ID (A)a RDS(on) (Ω) - 30 0.0098 at VGS = 10 V - 19.7 0.0165 at VGS = 4.5 V - 15.2 • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • 100 % Rg Tested Qg (Typ.) 27 nC APPLICATIONS • Load Switches - Notebook PCs - Desktop PCs SO-8 S 1 8 D S 2 7 D S 3 6 D G 4 5 D S G Top View D P-Channel MOSFET ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Symbol Limit Drain-Source Voltage VDS - 30 Gate-Source Voltage VGS ± 20 TC = 25 °C Continuous Drain Current (TJ = 150 °C) - 15.7 ID TA = 25 °C - 13b, c - 10.4b, c Pulsed Drain Current IDM TC = 25 °C - 4.7 IS TA = 25 °C - 2.1b, c 5.7 TC = 70 °C 3.6 PD TA = 25 °C W 2.5b, c 1.6b, c TA = 70 °C Operating Junction and Storage Temperature Range A - 50 TC = 25 °C Maximum Power Dissipation V - 19.7 TC = 70 °C TA = 70 °C Continous Source-Drain Diode Current Unit TJ, Tstg °C - 55 to 150 THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambient b, d Maximum Junction-to-Foot (Drain) Symbol Typical Maximum t ≤ 10 s RthJA 35 50 Steady State RthJF 18 22 Unit °C/W Notes: a. Based on TC = 25 °C. b. Surface Mounted on 1" x 1" FR4 board. c. t = 10 s. d. Maximum under Steady State conditions is 85 °C/W. Document Number: 64732 S09-0314-Rev. A, 02-Mar-09 www.GD\VHPLMS 1 DT. www.daysemi.jp SPECIFICATIONS TJ = 25 °C, unless otherwise noted Parameter Symbol Test Conditions Min. VDS VGS = 0 V, ID = - 250 µA - 30 Typ. Max. Unit Static Drain-Source Breakdown Voltage VDS Temperature Coefficient ΔVDS/TJ VGS(th) Temperature Coefficient ΔVGS(th)/TJ Gate-Source Threshold Voltage ID = - 250 µA VGS(th) VDS = VGS , ID = - 250 µA Gate-Source Leakage IGSS VDS = 0 V, VGS = ± 20 V Zero Gate Voltage Drain Current IDSS On-State Drain Currenta ID(on) Drain-Source On-State Resistancea Forward Transconductancea RDS(on) gfs V - 20 mV/°C 4.9 - 1.2 - 2.5 V ± 100 nA VDS = - 30 V, VGS = 0 V -1 VDS = - 30 V, VGS = 0 V, TJ = 55 °C -5 VDS ≤ - 5 V, VGS = - 10 V - 30 µA A VGS = - 10 V, ID = - 13 A 0.0081 0.0098 VGS = - 4.5 V, ID = - 10 A 0.0137 0.0165 VDS = - 15 V, ID = - 13 A 40 Ω S b Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Rg 2610 VDS = - 15 V, VGS = 0 V, f = 1 MHz VDS = - 15 V, VGS = - 10 V, ID = - 13 A td(off) 53 80 27 41 8 VDS = - 15 V, VGS = - 4.5 V, ID = - 13 A f = 1 MHz VDD = - 15 V, RL = 1.5 Ω ID ≅ - 10 A, VGEN = - 4.5 V, Rg = 1 Ω 0.4 2.1 4.2 52 78 41 62 36 54 tf 15 25 td(on) 12 20 tr td(off) nC 13 td(on) tr pF 460 395 VDD = - 15 V, RL = 1.5 Ω ID ≅ - 10 A, VGEN = - 10 V, Rg = 1 Ω tf 9 15 42 63 9 15 Ω ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulse Diode Forward Current ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Reverse Recovery Fall Time ta Reverse Recovery Rise Time tb TC = 25 °C - 4.7 - 50 IS = - 10 A, VGS = 0 V IF = - 10 A, dI/dt = 100 A/µs, TJ = 25 °C A - 0.8 - 1.2 V 20 30 ns 10 20 nC 10 9 ns Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.GD\VHPLMS 2 Document Number: 64732 S09-0314-Rev. A, 02-Mar-09 DT. www.daysemi.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 50 2.0 VGS = 10 V thru 4 V I D - Drain Current (A) I D - Drain Current (A) 40 30 20 1.5 1.0 TC = 25 °C 0.5 10 VGS = 3 V TC = 125 °C TC = - 55 °C 0 0.0 0.0 0.5 1.0 1.5 2.0 0 1 VDS - Drain-to-Source Voltage (V) 3 4 VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 0.020 4000 0.015 VGS = 4.5 V 0.010 VGS = 10 V Ciss 3000 C - Capacitance (pF) R DS(on) - On-Resistance (Ω) 2 2000 0.005 1000 Coss Crss 0.000 0 0 10 20 30 40 50 5 0 10 20 25 30 VDS - Drain-to-Source Voltage (V) ID - Drain Current (A) On-Resistance vs. Drain Current Capacitance 1.8 10 ID = 13 A ID = 13 A 8 6 VDS = 15 V VDS = 24 V 4 1.5 (Normalized) R DS(on) - On-Resistance VGS - Gate-to-Source Voltage (V) 15 VGS = 10 V 1.2 VGS = 4.5 V 0.9 2 0 0 20 10 30 40 Qg - Total Gate Charge (nC) Gate Charge Document Number: 64732 S09-0314-Rev. A, 02-Mar-09 50 60 0.6 - 50 - 25 0 25 50 75 100 125 150 TJ - Junction Temperature (°C) On-Resistance vs. Junction Temperature www.GD\VHPLMS 3 DT. www.daysemi.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 0.04 R DS(on) - On-Resistance (Ω) I S - Source Current (A) 100 TJ = 150 °C 10 TJ = 25 °C 1 0.03 0.02 TJ = 125 °C 0.01 TJ = 25 °C 0.1 0.0 0.00 0.4 0.2 0.6 0.8 1.0 0 1.2 2 6 4 8 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source Voltage 2.2 10 100 80 Power (W) VGS(th) (V) 1.9 1.6 ID = 250 µA 60 40 1.3 20 1.0 - 50 - 25 0 25 50 75 100 125 150 0 0.001 0.01 0.1 1 10 Time (s) TJ - Temperature (°C) Single Pulse Power (Junction-to-Ambient) Threshold Voltage 100 Limited by RDS(on)* 100 µA I D - Drain Current (A) 10 1 ms 10 ms 1 100 ms 0.1 TA = 25 °C Single Pulse BVDSS Limited 0.01 0.1 1s 10 s DC 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient www.GD\VHPLMS 4 Document Number: 64732 S09-0314-Rev. A, 02-Mar-09 DT. www.daysemi.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 24 I D - Drain Current (A) 20 16 12 8 4 0 0 50 25 75 100 125 150 TC - Case Temperature (°C) Current Derating* 1.8 8 1.5 6 Power (W) Power (W) 1.2 4 0.9 0.6 2 0.3 0.0 0 0 50 25 75 100 125 150 0 25 50 75 100 125 TC - Case Temperature (°C) TA - Ambient Temperature (°C) Power, Junction-to-Case Power, Junction-to-Ambient 150 * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. Document Number: 64732 S09-0314-Rev. A, 02-Mar-09 www.GD\VHPLMS 5 DT. www.daysemi.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = 0.02 t1 t2 2. Per Unit Base = RthJA = 85 °C/W Single Pulse 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted 0.01 10 -4 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) 100 10 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 Square Wave Pulse Duration (s) 1 10 Normalized Thermal Transient Impedance, Junction-to-Foot www.GD\VHPLMS 6 Document Number: 64732 S09-0314-Rev. A, 02-Mar-09 Package Information SOIC (NARROW): 8-LEAD JEDEC Part Number: MS-012 8 6 7 5 E 1 3 2 H 4 S h x 45 D C 0.25 mm (Gage Plane) A e B All Leads q A1 L 0.004" MILLIMETERS DIM Min INCHES Max Min Max A 1.35 1.75 0.053 0.069 A1 0.10 0.20 0.004 0.008 B 0.35 0.51 0.014 0.020 C 0.19 0.25 0.0075 0.010 D 4.80 5.00 0.189 0.196 E 3.80 4.00 0.150 e 0.101 mm 1.27 BSC 0.157 0.050 BSC H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.50 0.93 0.020 0.037 q 0° 8° 0° 8° S 0.44 0.64 0.018 0.026 ECN: C-06527-Rev. I, 11-Sep-06 DWG: 5498 Document Number: 71192 11-Sep-06 www.daysemi.jp 1 Application Note RECOMMENDED MINIMUM PADS FOR SO-8 0.172 (4.369) 0.028 0.022 0.050 (0.559) (1.270) 0.152 (3.861) 0.047 (1.194) 0.246 (6.248) (0.711) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index APPLICATION NOTE Return to Index www.daysemi.jp 1 Document Number: 72606 Revision: 21-Jan-08 Legal Disclaimer Notice www.daysemi.jp Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Din-Tek Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Din-Tek”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Din-Tek makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Din-Tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Din-Tek’s knowledge of typical requirements that are often placed on Din-Tek products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Din-Tek’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Din-Tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Din-Tek product could result in personal injury or death. Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Din-Tek. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Din-Tek documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 72610