DINTEK DTU90N03_13

DTU90N03
www.din-tek.jp
N-Channel 30-V (D-S) MOSFET
FEATURES
PRODUCT SUMMARY
VDS (V)
a, e
RDS(on) ()
30
Qg (Typ)
ID (A)
0.0029 at VGS = 10 V
90
0.0033 at VGS = 4.5 V
90
• TrenchFET® Power MOSFET
• 100 % Rg and UIS Tested
• Compliant to RoHS Directive 2011/65/EU
82 nC
APPLICATIONS
D
• OR-ing
• Server
• DC/DC
TO-252
G
G
D
S
Top View
S
N-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
Parameter
Symbol
Limit
Drain-Source Voltage
VDS
30
Gate-Source Voltage
VGS
± 20
TC = 70 °C
TA = 25 °C
90e
ID
28.8b, c
Pulsed Drain Current
IDM
Avalanche Current Pulse
IAS
36
EAS
64.8
Continuous Source-Drain Diode Current
L = 0.1 mH
TC = 25 °C
TA = 25 °C
90
90
IS
TC = 70 °C
TA = 25 °C
A
250a
175
PD
W
3.75b, c
2.63b, c
TA = 70 °C
TJ, Tstg
Operating Junction and Storage Temperature Range
V
a, e
3.13b, c
TC = 25 °C
Maximum Power Dissipation
A
27b, c
TA = 70 °C
Single Pulse Avalanche Energy
V
90a, e
TC = 25 °C
Continuous Drain Current (TJ = 175 °C)
Unit
- 55 to 175
°C
THERMAL RESISTANCE RATINGS
Parameter
Maximum Junction-to-Ambient
Maximum Junction-to-Case
Symbol
b, d
Typ.
Max.
t  10 sec
RthJA
32
40
Steady State
RthJC
0.5
0.6
Unit
°C/W
Notes:
a. Based on TC = 25 °C.
b. Surface mounted on 1" x 1" FR4 board.
c. t = 10 sec.
d. Maximum under steady state conditions is 90 °C/W.
e. Calculated based on maximum junction temperature. Package limitation current is 90 A.
1
DTU90N03
www.din-tek.jp
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
Parameter
Symbol
Test Conditions
Min.
VDS
VGS = 0 V, ID = 250 µA
30
Typ.
Max.
Unit
Static
Drain-Source Breakdown Voltage
VDS Temperature Coefficient
VDS/TJ
VGS(th) Temperature Coefficient
VGS(th)/TJ
Gate-Source Threshold Voltage
ID = 250 µA
VGS(th)
VDS = VGS, ID = 250 µA
Gate-Source Leakage
IGSS
VDS = 0 V, VGS = ± 20 V
Zero Gate Voltage Drain Current
IDSS
On-State Drain Currenta
ID(on)
Drain-Source On-State Resistancea
Forward Transconductancea
RDS(on)
gfs
V
35
mV/°C
- 7.5
1.5
2.5
V
± 100
nA
VDS = 30 V, VGS = 0 V
1
VDS = 30 V, VGS = 0 V, TJ = 55 °C
10
VDS 5 V, VGS = 10 V
90
µA
A
VGS = 10 V, ID = 28.8 A
0.0024
0.0029
VGS = 4.5 V, ID = 27 A
0.0027
0.0033
VDS = 15 V, ID = 28.8 A
160

S
Dynamicb
Input Capacitance
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
Total Gate Charge
Qg
Gate-Source Charge
Qgs
Gate-Drain Charge
Qgd
Gate Resistance
Rg
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
12065
VDS = 15 V, VGS = 0 V, f = 1 MHz
td(off)
pF
970
VDS = 15 V, VGS = 10 V, ID = 28.8 A
171
257
81.5
123
VDS = 15 V, VGS = 4.5 V, ID = 28.8 A
34
f = 1 MHz
1.4
2.1
18
27
VDD = 15 V, RL = 0.625 
ID  24 A, VGEN = 10 V, Rg = 1 
11
17
70
105
tf
10
15
td(on)
55
83
180
270
55
83
12
18
tr
td(off)
nC
29
td(on)
tr
1725
VDD = 15 V, RL = 0.67 
ID  22.5 A, VGEN = 4.5 V, Rg = 1 
tf

ns
Drain-Source Body Diode Characteristics
Continuous Source-Drain Diode Current
IS
Pulse Diode Forward Currenta
ISM
Body Diode Voltage
VSD
TC = 25 °C
90
90
IS = 22 A
0.8
1.2
A
V
Body Diode Reverse Recovery Time
trr
52
78
ns
Body Diode Reverse Recovery Charge
Qrr
70.2
105
nC
Reverse Recovery Fall Time
ta
Reverse Recovery Rise Time
tb
IF = 20 A, di/dt = 100 A/µs, TJ = 25 °C
27
25
ns
Notes:
a. Pulse test; pulse width  300 µs, duty cycle  2 %.
b. Guaranteed by design, not subject to production testing.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
2
DTU90N03
www.din-tek.jp
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
3.0
90
VGS = 10 V thru 4 V
2.4
I D - Drain Current (A)
I D - Drain Current (A)
75
60
45
30
1.8
1.2
TC = 25 °C
0.6
15
VGS = 2 V
0
0.0
TC = 125 °C
VGS = 3 V
TC = - 55 °C
0.0
1.5
2.0
0.5
1.0
VDS - Drain-to-Source Voltage (V)
0
2.5
1
2
3
4
VGS - Gate-to-Source Voltage (V)
Output Characteristics
Transfer Characteristics
600
0.0032
TC = 25 °C
0.0030
R DS(on) – On-Resistance (Ω)
G fs - Transconductance (S)
500
TC = 125 °C
400
300
TC = - 55 °C
200
100
VGS = 4.5 V
0.0028
0.0026
0.0024
0.0022
0
0.0020
0
10
20
ID - Drain Current (A)
30
45
60
ID - Drain Current (A)
Transconductance
RDS(on) vs. Drain Current
30
40
50
60
70
80
0
90
15 000
ID = 28.8 A
V GS - Gate-to-Source Voltage (V)
Ciss
9000
6000
Coss
3000
Crss
0
0
15
75
90
10
12 000
C - Capacitance (pF)
VGS = 10 V
VDS = 15 V
8
VDS = 24 V
6
4
2
0
6
12
18
24
VDS - Drain-to-Source Voltage (V)
Capacitance
30
0
30
90
120
150
60
Qg - Total Gate Charge (nC)
180
Gate Charge
3
DTU90N03
www.din-tek.jp
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
100
VGS = 10 V, ID = 28.8 A
VGS = 4.5 V, ID = 27 A
10
1.4
I S - Source Current (A)
R DS(on) - On-Resistance (Normalized)
1.6
1.2
1.0
0.8
1
T J = 150 °C
T J = 25 °C
0.1
0.01
0.6
- 50
0.001
- 25
0
25
50
75
100
125
150
0
175
0.2
0.4
0.6
0.8
1
VSD - Source-to-Drain Voltage (V)
TJ - Junction Temperature (°C)
On-Resistance vs. Junction Temperature
Forward Diode Voltage vs. Temperature
2.8
0.005
0.004
2.4
TA = 125 °C
V GS(th) Variance (V)
RDS(on) -On-Resistance (Ω)
ID = 28.8 A
0.003
TA = 25 °C
0.002
ID = 250 µA
2.0
1.6
1.2
0.001
0.000
0
2
4
6
8
10
0.8
- 50 - 25
0
50
75
100
TJ - Temperature (°C)
RDS(on) vs. VGS vs. Temperature
Threshold Voltage
1000
*Limited by rDS (on)
I D - Drain Current (A)
100
10
10 ms
100 ms
1
1s
10 s
dc
0.1
0.01
TA = 25 °C
Single Pulse
0.001
0.1
*VGS
1
10
100
VDS - Drain-to-Source Voltage (V)
minimum VGS at which rDS(on) is specified
Safe Operating Area, Junction-to-Ambient
4
25
VGS - Gate-to-Source Voltage (V)
125 150
175
DTU90N03
www.din-tek.jp
300
300
250
250
Power Dissipation (W)
ID - Drain Current (A)
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
200
150
Package Limited
100
50
200
150
100
50
0
0
0
25
50
75
100
125
150
175
0
25
50
75
100
125
TC - Case Temperature (°C)
TC - Case Temperature (°C)
Current Derating*
Power Derating
150
175
*The power dissipation PD is based on TJ(max) = 175 °C, using junction-to-case thermal resistance, and is more useful in settling the upper
dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package
limit.
2
Normalized Effective Transient
Thermal Impedance
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
Single Pulse
0.01
10- 4
10- 3
10- 2
10- 1
1
10
Square Wave Pulse Duration (sec)
Normalized Thermal Transient Impedance, Junction-to-Case
5
Package Information
www.din-tek.jp
TO-252AA CASE OUTLINE
E
MILLIMETERS
A
C2
e
b2
C
A1
D1
e1
L
gage plane height (0.5 mm)
L4
b
L5
H
D
L3
b3
MIN.
MAX.
MIN.
MAX.
A
2.18
2.38
0.086
0.094
A1
-
0.127
-
0.005
b
0.64
0.88
0.025
0.035
b2
0.76
1.14
0.030
0.045
b3
4.95
5.46
0.195
0.215
C
0.46
0.61
0.018
0.024
C2
0.46
0.89
0.018
0.035
D
5.97
6.22
0.235
0.245
D1
5.21
-
0.205
0.265
E
6.35
6.73
0.250
E1
4.32
-
0.170
-
H
9.40
10.41
0.370
0.410
e
2.28 BSC
0.090 BSC
e1
4.56 BSC
0.180 BSC
L
1.40
1.78
0.055
0.070
L3
0.89
1.27
0.035
0.050
L4
-
1.02
-
0.040
L5
1.14
1.52
0.045
0.060
ECN: X12-0247-Rev. M, 24-Dec-12
DWG: 5347
E1
Note
• Dimension L3 is for reference only.
1
INCHES
DIM.
Application Note
www.din-tek.jp
RECOMMENDED MINIMUM PADS FOR DPAK (TO-252)
0.224
0.243
0.087
(2.202)
0.090
(2.286)
(10.668)
0.420
(6.180)
(5.690)
0.180
0.055
(4.572)
(1.397)
Recommended Minimum Pads
Dimensions in Inches/(mm)
APPLICATION NOTE
1
Legal Disclaimer Notice
www.din-tek.jp
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Din-Tek Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Din-Tek”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Din-Tek makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Din-Tek disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Din-Tek’s knowledge of typical
requirements that are often placed on Din-Tek products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Din-Tek’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Din-Tek products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Din-Tek product could result in personal injury or death.
Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Din-Tek. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Din-Tek documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
1