Made in the United States of America A C Blue 07405 07410 07412 07415 07420 Yellow Spine 07435 1.2" 07436 1.7" 07437 2.3" 07438 2.9" 07439 4.2" Ring 0.5" 1" 1.5" 2" 3" Depth 10" 10.3" 10.6" 11.5" 12" Spine size is the shelf space requirement of the binder. Depth is the shelf depth requirement of the binder. D A. MATERIAL 0.016" (16 mil)* static dissipative vinyl over chipboard stiffener. Heat sealed on all edges. Surface Resistance = 1 x 108 to < 1 x 1011 ohms per ANSI/ESD STM11.11. Static Decay = <0.30 seconds B. Ring constructed of nickel plated steel. Ring size is the inside diameter of the ring and indicates the capacity of the binder to hold material. C. On the lower spine is hot stamped the ESD protective symbol. “It should be understood that any object, item, material or person could be a source of static electricity in the work enviroment. Removal of unnecessary nonconductors, replacing nonconductive materials with dissipative or conductive materials and grounding all conductors are the principle methods of controlling static electricity in the workplace, regardless of the activity.” [ESD Handbook ESD TR20.20 section 2.4 Sources of Static Electricity] *Tolerance Thickness: ± 10% All other Dimensions are ± 1/16" D. On the lower left front is hot stamped the ESD protective symbol and “STATIC DISSIPATIVE BINDER Rtt: <1x1011 Ohms MADE IN THE UNITED STATES OF AMERICA DescoIndustries.com” Specifications and procedures subject to change without notice. 3 Ring Dissipative Binders without Pockets DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 © 2013 DESCO INDUSTRIES INC. Employee Owned DRAWING NUMBER 07405 DATE: September 2013