Your Contact for Relays SECTION PRINTED CIRCUIT BOARD RELAYS 1 TO 30 AMPERES 7 PRINTED CIRCUIT BOARD RELAYS 9A 90 1330/1335 RELAY SERIES ISO 9002 QS 9000 L W H 0.905 x 0.728 x 1.275 MINIATURE SIZE ENCLOSED SEE THRU COVER WITH PRINTED CIRCUIT TERMINALS FEATURES AC OR DC OPERATION 5 AMP RESISTIVE OR 3 AMP INDUCTIVE SWITCHING L W H 1.30 x 1.08 x 0.805 L W H 1.27 x 1.08 x 1.10 EPOXY SEALED IMMERSION CLEANABLE EPOXY SEALED IMMERSION CLEANABLE WITH TAPE SEAL STANDARD 0.1 GRID PATTERN CLASS "F" INSULATION SYSTEM CLASS "B" OR "F" INSULATION SYSTEM SPADE TERMINALS ACCEPT INSULATED 1/4" QUICK CONNECT TERMINALS & 3/16'" COIL QUICK CONNECT TERMINALS MEETS UL 508 & UL 873 SPACING SEE SECTION 1 FOR FLANGE MOUNT STYLE WITH 1/4” & 3/16” QUICK CONNECT TERMINALS ONTACT DATA DPDT CONTACT CONFIGURATION: SPST-NO. & SPDT SPST-NO. & SPDT CONTACT MATERIAL: SILVER CADMIUM OXIDE SILVER CADMIUM OXIDE SILVER CADMIUM OXIDE MAX. CONTACT RATING: 3 AMP, 120 VAC., 5 AMP, 120 VAC., 30 VDC SPST-NO: 30AMP, 240 VAC, 20AMP, 30 VDC SPDT: 20 AMP, 250 VAC (NO), 15 AMP, 240 VAC (NC), 10AMP, 30 VDC SPST-NO: 30AMP, 240 VAC, 20AMP, 28 VDC SPDT: 30 AMP, 240 VAC, 20AMP, 28 VDC (NO), 15AMP, 240 VAC,10AMP, 28 VDC (NC), 24 & 120 VAC 12 & 24 VDC 5, 12, 24 & 110 VDC 5, 12, 24, 48 & 110 VDC 1.2 VA 1.2 WATTS 2.8 WATTS MAX. 0.95 VA 2.8 WATTS MAX - 45˚C TO +70˚C - 55˚C TO +105˚C - 55˚C TO +85˚C - 55˚C TO +130˚C - 55˚C TO +130˚C 1500 V rms 1500 V rms 2500 V rms 100,000 OPERATIONS AC: 50 ,000,000 & DC:100,000,000 OPERATIONS 100,000 OPERATIONS 10,000,000 OPERATIONS 100,000 OPERATIONS 10,000,000 OPERATIONS COIL DATA STANDARD VOLTAGE AC: DC: NOMINAL COIL POWER VA: (VAC) WATTS: (VDC) INSULATION SYSTEM PER GENERAL DATA AMBIENT TEMPERATURE OPERATING: STORAGE: DIELECTRIC STRENGTH: (COIL TO FRAME) LIFE EXPECTANCY ELECTRICAL: MECHANICAL: AGENCY APPROVALS C US UL Recognized File No. E52197 PAGE NUMBER 7...1 PAGE 4 C C US UL Recognized File No. E13224 LR 700908 PAGE 5 - 6 US UL Recognized File No. E43641 PAGE 7 - 8 PRINTED CIRCUIT BOARD RELAYS 92 L W H 2.06 x 1.36 x 1.356 EPOXY SEALED IMMERSION CLEANABLE WITH TAPE SEAL CLASS "F" INSULATION SYSTEM SEE SECTION 1 FOR FLANGE MOUNT STYLE WITH 1/4” & 3/16” QUICK CONNECT TERMINALS 7 L W H 0.410 x 0.410 x 0.553 A178 60 L W H 1.10 x 0.600/0.895 x 0.745 L W H 0.750 x 0.611 x 0.630 MICRO MINIATURE SIZE MINIATURE SIZE MINIATURE EPOXY SEALED CONFORMS TO FCC PART 68.302, 1500V SURGERESISTANCE, FCC 68.3041000V DIELECTRIC STRENGTH CONFORMS TO FCC PART 68.302, 1500V SURGE RESISTANCE, FCC 68.3041000V DIELECTRIC STRENGTH PRINTED CIRCUIT BOARD MOUNTING EXCELLENT R.F. SWITCHING CHARACTERISTICS EXCELLENT R.F. SWITCHING CHARACTERISTICS HIGH SHOCK & VIBRATION RESISTANCE PRINTED CIRCUIT BOARD MOUNTING ON 0.1 GRID PATTERN 94V-0 PLASTIC, EPOXY SEALED SWITCHES UP TO 15 AMP LOADS CLASS "B" OR "F" INSULATION SYSTEM HIGH SHOCK & VIBRATION RESISTANCE IMMERSION CLEANABLE PRINTED CIRCUIT BOARD MOUNTING ON 0.1 GRID PATTERN DISPLACES APPROXIMATELY 0.29 CUBIC INCH DPST-NO. & DPDT SPDT & DPDT SPDT & DPDT SPST SILVER CADMIUM OXIDE GOLD CLAD SILVER GOLD CLAD SILVER SILVER ALLOY DPDT-NO: 30A, 277 VAC. 20A, 28 VDC DPST-NO: 30A, 277 VAC. 20A, 28 VDC DPDT-NC: 3A, 277 VAC, 28 VDC DPDT: 2 AMP, 24 VDC, 0.6AMP, 100 VAC SPDT: 2 AMP, 120 VAC, 50 uA, 50 mV MIN 2 AMP, 24 VDC DPDT: 2 AMP, 24 VDC, 1 AMP, 100 VAC SPDT: 2 AMP, 120 VAC 50 uA, 50 mV MIN 12 AMP, 120 VAC, 30 VDC 10 AMP, 150 VAC 24, 120 & 240 VAC 12, 24, 48 & 110 VDC 5, 12, & 24 VDC 5, 12, & 24 VDC 3, 5, 12, 24 & 48 VDC 4 VA 1.7 WATTS 327 MILLIWATTS MAX 327 MILLIWATTS MAX 0.36 WATTS DC: - 40˚C TO +85˚C AC: - 40˚C TO +65˚C - 55˚C to +155˚C - 35˚C TO +70˚C - 35˚C TO +70˚C - 40˚C TO +70˚C 4000 V rms 500 V rms 500 V rms 1500 V rms 5,000,000 OPERATIONS 100,000 OPERATIONS 100,000,000 OPERATIONS 100,000 OPERATIONS 100,000,000 OPERATIONS 100,000 OPERATIONS 100,000 OPERATIONS 10,000,000 OPERATIONS C US UL Recognized File No. E43641 PAGE 9 - 10 - 40˚C TO +80˚C C US C US C US UL Recognized File No. E52197 UL Recognized File No. E52197 UL Recognized File No. E195668 PAGE 11 - 12 PAGE 13 - 14 PAGE 15 - 16 7...2 PRINTED CIRCUIT BOARD RELAYS 976 49 276 RELAY SERIES ISO 9002 QS 9000 ISO 9002 QS 9000 L W H 1.25 x 0.759 x 1.14 DUST COVERED FEATURES L W H 0.807 x 0.50 x 0.394 L W H 1.161 x 0.512 x 1.000 EPOXY SEALED IMMERSION CLEANABLE SUBMINIATURE EPOXY SEALED IMMERSION CLEANABLE DISPLACES APPROXIMATELY 1.1 CUBIC INCH MEETS 8 MILLIMETER SPACING COIL TO CONTACTS STANDARD 0.1 GRID PATTERN VARIETY OF MOUNTING CONFIGURATIONS MEETS 4KV DIELECTRIC WITHSTANDING VOLTAGE SINGLE SIDE STABLE DESIGN 5KV SURGE RESISTANCE COIL TO FRAME TV-5 RATINGS AVAILABLE MEETS 4mm INTERNATIONAL SPACING COIL TO CONTACT ONTACT DATA SPDT CONTACT CONFIGURATION: CONTACT MATERIAL: MAX. CONTACT RATING: SPST-NO. & SPDT SPDT & DPDT SILVER CADMIUM OXIDE SILVER, GOLD PLATED SILVER CADMIUM OXIDE SILVER ALLOY 3 AMP, 120 VAC, 28 VDC (15 AMP, 150 VAC, 28 VDC) 5 AMP, 120 VAC, 28 VDC 10 AMP, 120/240 VAC, 28 VDC (15 AMP, 150 VAC, 28 VDC) SPDT: 20 AMP, 125 VAC, 30 VDC 10AMP, 48 VDC, 16 AMP, 250VAC, 30 VDC DPDT: 5 AMP, 250 VAC, 30 VDC SPST-NO: 10AMP, 250 VAC/30 VDC SPDT: 7 AMP, 250 VAC/30 VDC COIL DATA STANDARD VOLTAGE AC: DC: NOMINAL COIL POWER VA: (VAC) WATTS: (VDC) INSULATION SYSTEM PER UL STANDARD 1446 3, 5, 6, 12, 24 VDC 24, 120 & 240 VAC 5, 6, 12 & 24 VDC 5, 6, 12, & 24 VDC 400 MILLIWATTS 1.2 VA 0.54 WATTS 200 MILLIWATTS - 55˚C TO +85˚C - 20˚C TO +55˚C - 40˚C TO +70˚C - 55˚C TO +130˚C - 40˚C TO +80˚C 1500 V rms 5000 V rms 2000 V rms 100,000 OPERATIONS 50,000,000 OPERATIONS 100,000 OPERATIONS 10,000,000 OPERATIONS 100,000 OPERATIONS 2,000,000 OPERATIONS GENERAL DATA AMBIENT TEMPERATURE OPERATING: STORAGE: DIELECTRIC STRENGTH: (COIL TO FRAME) LIFE EXPECTANCY ELECTRICAL: MECHANICAL: AGENCY APPROVALS C US UL Recognized File No. E52197 PAGE NUMBER 7...3 PAGE 17 - 18 C C US UL Recognized File No. E191122 PAGE 19 - 20 TUV US UL Recognized File No. E190964 PAGE 21 - 22 CLASS PRINTED CIRCUIT BOARD TRANSPARENT ENCLOSED RELAY 1330 & 1335 DPDT 5 AMPS c OUTLINE DIMENSIONS 1.075 MAX. (27.3) 0.728 MAX. (18.5) 0.052 TYP. (1.31) 0.200 MAX. (5.08) 0.905 MAX. (23) 1 2 3 PRINTED CIRCUIT MOUNTING HOLE LAYOUT 4 5 6 (BOTTOM VIEW) 7 8 9 10 0.189 (4.8) GENERAL SPECIFICATIONS Dropout Voltage: Max. Voltage: Resistance: Duty: CONTACTS Contact Material: Contact Resistance: Contact Rating: TIMING Operate Time: Release Time: 0.354 (9) 0.551 (14) 0.231 (5.9) 0.067 DIA. (1.7) 8 PLACES CIRCUIT DIAGRAM -45˚C to +70˚C @ rated operation Weight: 0.157 (4) 0.197 (5) 0.197 (5) 20 mS max AC, 15 mS max. DC @ nominal voltage 20 mS max. AC, 15 mS max. DC @ nominal voltage TEMPERATURE Ambient Temperature: Enclosure: 0.123 (3.1) Silver cadmium oxide, 0.093 Dia. (2.36) 100 milliohms max UL RATED - 5 Amps @ 120 VAC resistive NOT UL RATED - 30 VDC resistive, 3 Amp inductive, 1/8 Hp @ 120 VAC 1500 V rms 500 V rms 1500 V rms 1500 megohms min MISCELLANEOUS Operating Position: Insulating Material: 0.350 (8.9) 0.905 REF. (23) 75% of nominal voltage or less for AC or DC coils 10% min.or more for DC 110% ±10% measured @ 25˚C Continuous DIELECTRIC STRENGTH Coil to Frame: Across Open Contacts: Contact to Frame: Insulation Resistance: LIFE EXPECTANCY Electrical: Mechanical: MANUFACTURED UNDER ISO 9002 & QS 9000 0.728 REF. (18.5) 11 0.020 MAX. (0.5)REF. COIL Pull-in Voltage: us UL Recognized File No. E52197 DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). (VIEWED FROM PIN END) 100,000 operations @ rated resistive load AC operated device in excess of 50,000,000 operations DC operated devices, in excess of 100,000,000 operations Any Molded parts are diallyl phthalate for higher arc resistance Clear heat resistant polycarbonate dust cover 24 grams approx. PHONE: ( 843 ) 393-5778 FAX: ( 843 ) 393-4123 EMAIL: [email protected] COIL MEASURED @ 25˚C STANDARD PART NUMBERS AC OPERATED COILS W1330P-2C-24A W1330P-2C-120A DC OPERATED COILS W1335P-2C-12D W1335P-2C-24D CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) DPDT DPDT 24 VAC 120 VAC 245 Ω 5400 Ω DPDT DPDT 12 VDC 24 VDC 125 Ω 500 Ω 7...4 CLASS 90 PRINTED CIRCUIT BOARD HIGH - POWER RELAY SPST-N.O. & SPDT 30 AMPS UL CONTACT LOAD RATINGS TABLE LOAD RESISTIVE RESISTIVE RESISTIVE INDUCTIVE RESISTIVE LOAD VOLTAGE 240 VAC 277 VAC 5-30 VDC 277 VAC 125 VAC 125 VAC MOTOR 240/250VAC 125/240 VDC 125 VAC 240 VAC FLA/LRA‡ 277 VAC 125 VAC 250 VAC TUNGSTEN 277 VAC BALLAST SPDT-N.O. LOAD 30 AMP 20 AMP 20 AMP 12 AMP SPDT N.O. OPERATIONS N.C. OPERATIONS 20 AMP 2-10 AMP 100,000 100,000 20 AMP 15AMP @ 250VAC 100,000 100,000 20 AMP 10 AMP 100,000 100,000 12 AMP 6 AMP 6,000 6,000 c us LR 700908 UL Recognized File No. E13224 COMPLIES WITH REQUIREMENTS OF 1 HP 3/4 HP 2 HP 470 VA 30/96 30/80 20/60 27/82 TV - 3 6 AMP 1 HP 3/4 HP 2 HP 470 VA 30/96 30/80 20/60 27/82 TV - 3 6 AMP 30,000 100,000 1,000 100,000 30,000 30,000 100,000 100,000 25,000 6,000 1/4 HP 1/2 HP 275 VA 10/33 10/33 TV - 3 3 AMP STANDARDS 947-4-1 AND * IEC 947-5-1 LOW VOLTAGE DIRECTIVE 30,000 30,000 30,000 6,000 = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT MANUFACTURED UNDER ISO 9002 & QS 9000 ‡ FLA = Full load Amps, LRA = Locked rotor Amps. CLASS "B" OR "F" INSULATION EPOXY SEALED. BREAKAWAY NIB OVER VENT HOLE (REMOVED AFTER CLEANING). CLASS 90 PRINTED CIRCUIT BOARD RELAYS PROVIDE AN INEXPENSIVE MEANS OF SWITCHING LOADS UP TO 30 AMPS. DESIGNED PRIMARILY FOR THE APPLIANCE INDUSTRY AND HVAC MARKETS, THEY ARE ALSO WELL SUITED FOR LOAD MANAGEMENT, AUTOMOTIVE AND OTHER APPLICATIONS. GENERAL SPECIFICATIONS COIL Pull-in Voltage: Dropout Voltage: Resistance: Coil Power: Insulation System: Duty: CONTACTS Contact Material: Contact Resistance: TIMING Operate Time: Release Time: DIELECTRIC STRENGTH Contacts to Coil: Across Open Contacts Insulation Resistance: 75% of nominal voltage or less 10% of nominal voltage or more ±10% measured @ 25˚C 2.8 watts max Class "B" (130˚C) or class "F" (155˚C) Continuous Silver cadmium oxide 50 milliohms max. initial value 15 mS max. @ nominal voltage 10mS max. @ nominal voltage TEMPERATURE Operating: Storage: Relative Humidity: Atmospheric Pressure: VIBRATION RESISTANCE Functional: SHOCK RESISTANCE Functional: Mechanical: LIFE EXPECTANCY Electrical: 1500 V rms 1000 V rms 500 megohms under normal conditions 100 megohms high temp, high humidity MISCELLANEOUS Operating position: Enclosure: Weight: 7...5 10 to 55 Hz @ double amplitude of 1 mm 10 g's for 11 mS, no contact opening > 100uS 100 g's 100,000 operations @ rated resistive load 10,000,000 operations @ no load Mechanical: PHONE: ( 843 ) 393-5778 -55˚C to +105˚C -55˚C to +130˚C Up to 93% @ 40˚C 650 to 800 mmHg Any 94V-0 flammability rating, epoxy sealed immersion cleanable 27 grams approx FAX: ( 843 ) 393-4123 EMAIL: [email protected] CLASS 90 PRINTED CIRCUIT BOARD HIGH - POWER RELAY SPST-N.O. & SPDT 30 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 0.031 X 0.062 (0.8 X1.6) VENT HOLE NIB 0.208 MAX. (5.28) 0.830 MAX. (21.08) 1.08 MAX. (27.4) 0.693 (17.6) 0.045 X 0.045 (1.1 X 1.1) 0.100 (2.54) 1.30 (33) PIN REMOVED ON CLASS “F” STYLES 0.78 (19.8) 0.96 (24.3) 0.150 (3.8) STAND OFF (QTY. 5) 0.025 X 0.025 (0.64 X 0.64) WIRING DIAGRAM (VIEWED FROM PIN END) FIG. A FIG. C PRINTED CIRCUIT MOUNTING HOLE LAYOUT ( BOTTOM VIEW ) A B A B A SPST-N.O. 0.400 (10.1) 0.100 (2.54) SPST-N.O. FIG. B FIG. D 0.500 (12.7) 0.600 (15.2) 0.150 (3.8) 0.550 (13.9) 0.350 (8.9) SPDT SPDT NOT USED ON CLASS “F” STYLES 0.700 (17.8) DRILL “A” HOLES 0.086 DRILL “B” HOLES 0.046 COIL MEASURED @ 25˚C STANDARD PART NUMBERS CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE CLASS “B” INSULATION, FIG. “A”, 30 AMP SPST-NO W90S1D12-5 5 VDC SPST-NO W90S1D12-12 12 VDC SPST-NO W90S1D12-24 24 VDC SPST-NO W90S1D12-110 110 VDC CLASS “B” INSULATION, FIG. “B”, 20 AMP SPDT W90S5D12-5 5 VDC SPDT W90S5D12-12 12 VDC SPDT W90S5D12-24 24 VDC SPDT W90S5D12-110 110 VDC CLASS “F” INSULATION, FIG. “C”, 30 AMP SPST-NO W90S1D42-5 5 VDC SPST-NO W90S1D42-12 12 VDC SPST-NO W90S1D42-24 24 VDC SPST-NO W90S1D42-110 110 VDC CLASS “F” INSULATION, FIG. “D”, 20 AMP W90S5D42-5 W90S5D42-12 W90S5D42-24 W90S5D42-110 SPDT SPDT SPDT SPDT 5 VDC 12 VDC 24 VDC 110 VDC NOMINAL RESISTANCE (OHMS) 27 Ω 155 Ω 660 Ω 13,450 Ω 27 Ω 155 Ω 660 Ω 13,450 Ω 27 Ω 155 Ω 660 Ω 13,450 Ω 27 Ω 155 Ω 660 Ω 13,450 Ω 7...6 CLASS 9A PRINTED CIRCUIT INPUT/QUICK CONNECT OUTPUT POWER RELAY SPST-N.O. & SPDT 30 AMPS UL CONTACT LOAD RATINGS TABLE LOAD GENERAL PURPOSE RESISTIVE MOTOR FLA/LRA ‡ TUNGSTEN BALLAST PILOT DUTY LOAD VOLTAGE 240 VAC 28 VDC 125 VAC 240 VAC 120 VAC 240 VAC 240 VAC 277 VAC 240 VAC SPST N.O. LOAD 30AMP 30AMP 1 HP 2 HP 22/98AMP 30/80AMP TV - 5 10AMP 470 VAC SPDT OPERAN.O.LOAD N.C.LOAD TIONS 100,000 30AMP 15AMP 100,000 30AMP 10AMP 1,000 1 HP 1/4 HP 6,000 2 HP 1/2 HP 100,000 22/98AMP 30,000 30/80AMP 12/30AMP 25,000 TV - 5 6,000 10AMP 3AMP 6,000 470 VAC 275 VAC c us UL Recognized File No. E43641 ‡ FLA = Full load amps, LRA = Locked rotor amps. CLASS "F" INSULATION. EPOXY SEALED WITH REMOVABLE TAPE SEAL OVER VENT HOLE (REMOVED AFTER CLEANING) MEETS UL 508, UL 873 AND UL 1950 - 1/8" THRU AIR - 1/4" OVER SURFACE (SEE NOTES) GENERAL SPECIFICATIONS COIL Pull-in Voltage: Dropout Voltage: Max. Coil Voltage: Power Consumption: Insulation System: Resistance: Duty: CONTACT Contact Material: Switching Voltage: Contact Resistance: Minimum Load: TIMING Operate Time: Release Time: 80% of nominal voltage or less for AC coils 75% of nominal voltage or less for DC coils 10% of nominal voltage or more 120% max. AC coil: 0.95 VA, DC coil: 2.8 watts max. Class "F"(155˚C) ±10% measured @ 25˚C Continuous Silver cadmium oxide 277 VAC, 28 VDC max. 75 milliohms @ 1 Amp rated current 1 A, 5 VDC, 12 VAC DC:15 mS typ. Including bounce DC:15mS typ. Including bounce DIELECTRIC STRENGTH Contacts to Coil: 2500 V rms Between Open Contacts: 1500 V rms Insulation Resistance: 1000 mΩ min. @ 500 VDC, 25˚C 50% Rh 7...7 TEMPERATURE Operating: Storage: -55˚C to +85˚C -55˚C to +130˚C VIBRATION RESISTANCE Functional: SHOCK RESISTANCE Functional: Mechanical: LIFE EXPECTANCY Electrical: Mechanical: MISCELLANEOUS Operating Position: Enclosure: Enclosure: Terminals: Weight: PHONE: ( 843 ) 393-5778 10 to 55Hz 1.65 mm max. No contact opening > 100 uS 10 g's for 11 mS, no contact opening > 100 µS 100 g's 100,000 operations @ rated resistive load 10,000,000 operations @ no load Any Epoxy sealed immersion cleanable suitable for automatic circuit board processing. Max. Exposure soldering temperature is 4 sec. @ 500˚F. 94V-O flammability rating 1/4" quick connect & safety wells accept insulated female quick connect terminals 33 grams approx FAX: ( 843 ) 393-4123 EMAIL: [email protected] CLASS 9A PRINTED CIRCUIT INPUT/QUICK CONNECT OUTPUT POWER RELAY SPST-N.O. & SPDT 30 AMPS OUTLINE DIMENSIONS NC DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 1.270 MAX. (32.26) 0.032 X 0.62 (0.81 X 1.57) A1 0.045 X 0.045 (1.14 X 1.14) com NO A1 A1 0.025 X 0.025 (0.63 X 0.63) 2 PLACES 1.080 MAX. (27.43) 1.10 MAX. (27.94) 0.130 ± 0.020 (3.30 ± 0.51) PRINTED CIRCUIT MOUNTING HOLE LAYOUT ( BOTTOM VIEW ) 0.14 MAX. (3.56) 0.25 MAX. (6.35) WIRING DIAGRAM (VIEWED FROM PIN END) A 0.300 (7.62) 0.600 (15.24) A 0.100 (2.54) B A B 0.500 (12.7) 0.150 (3.81) 0.550 (13.97) SPST-N.O. SPDT 0.700 (17.8) COIL MEASURED @ 25˚C STANDARD PART NUMBERS HOLE “A” = 0.081 ±0.005 DIA. (2.06 X 0.13) HOLE “B” = 0.043 ±0.08 DIA. (1.09 X 0.08) CONTACT CONFIGURATION PRINTED CIRCUIT MOUNT, 30 AMP W9AS1D22-5 SPST-NO W9AS1D22-12 SPST-NO W9AS1D22-24 SPST-NO W9AS1D22-110 SPST-NO PRINTED CIRCUIT MOUNT, 20 AMP W9AS5D22-5 SPDT W9AS5D22-12 SPDT W9AS5D22-24 SPDT W9AS5D22-110 SPDT PRINTED CIRCUIT MOUNT, 30 AMP W9AS1A22-24 SPST-NO W9AS1A22-120 SPST-NO W9AS1A22-240 SPST-NO PRINTED CIRCUIT MOUNT, 20 AMP W9AS5A22-24 SPDT W9AS5A22-120 SPDT W9AS5A22-240 SPDT NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) 5 VDC 12 VDC 24 VDC 110 VDC 25 Ω 144 Ω 576 Ω 12100 Ω 5 VDC 12 VDC 24 VDC 110 VDC 25 Ω 144 Ω 576 Ω 12100 Ω 24 VAC 120 VAC 240 VAC 24 VAC 120 VAC 240 VAC 7...8 CLASS PRINTED CIRCUIT BOARD POWER RELAY 92 DPST-N.O. & DPDT 30 AMPS UL CONTACT LOAD RATINGS TABLE LOAD VOLTAGE DPST-N.O. & DPDT N.O. LOAD 30 AMP 120/277 VAC RESISTIVE 20 AMP 28 VDC LOAD 1 HP 120 VAC MOTOR 3 HP 240 VAC TUNGSTEN 120 VAC TV-10 96/22 240 VAC LRA/FLA* 110/25.3 PILOT DUTY 240 VAC 3 AMP RATING DPDT N.C. LOAD 3 A MP 3 A MP - c OPERATIONS us UL Recognized File No. E43641 6,000 100,000 1000 1000 25,000 30,000 6,000 Note: Vent tape must be removed to achieve listed ratings * FLA = Full load Amps, LRA = Locked rotor Amps. CLASS "F" INSULATION. EPOXY SEALED WITH REMOVABLE TAPE SEAL OVER VENT HOLE (REMOVED AFTER CLEANING). MEETS UL 873 AND UL 508 SPACING - (8MM) THRU AIR, (9.5 MM) OVER SURFACE GENERAL SPECIFICATIONS COIL Pull-in Voltage: AC: 80% of nominal voltage or less DC: 75% of nominal voltage or less Dropout Voltage: 10% of nominal voltage or more Max. Operating Frequency: 14 operations per minute Coil Power: AC coil: 4.0VA, DC coil: 1.7W Insulation System: Class "F" (155˚C) Coil Resistance: ±10% measured @ 25˚C Duty: Continuous CONTACT Contact Material: Contact Load Ratings: Contact Resistance: Minimum Load: TIMING Operate Time: Release Time: DIELECTRIC STRENGTH Between Open Contacts: Contacts to Coil: Insulation Resistance: 7...9 Silver cadmium oxide See: “UL CONTACT LOAD RATINGS TABLE” 100,000,000 @ initial rated current (switched) N.O. 500 mA @ 12 VAC/VDC N.C. 100 mA @ 6 VAC/VDC DC:15 mS typ. 25ms W / Bounce DC: 10mS typ. 25 ms W / Bounce 1500 V rms 4000V rms 103 meg Ω min. @ 500 VDC, 50% Rh TEMPERATURE Operating: AC coil rectified: -40˚C to +85˚C, DC: -40˚C to +85˚C -55˚C to +155˚C Storage: VIBRATION RESISTANCE Functional: SHOCK RESISTANCE Functional: Mechanical: LIFE EXPECTANCY Electrical: MISCELLANEOUS Operating Position: Enclosure: PHONE: ( 843 ) 393-5778 10 g's for 11 mS, 1/2 sign wave pulse with no contact opening > 100µs 100 g for 11 ms 1/2 sine wave pulse 100,000 operations @ rated resistive load 5,000,000 operations @ no load Mechanical: Flammability: Weight: 0.065 (1.65 mm) double amplitude -10 thru 55 Hz Any Epoxy sealed immersion cleanable tape sealed plastic cover 94V-O Flammability rating 86 g approx FAX: ( 843 ) 393-4123 EMAIL: [email protected] CLASS 92 PRINTED CIRCUIT BOARD POWER RELAY DPST-N.O. & DPDT 30 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 0.63 ±0.005 (16.00) 1.356 MAX (34.44) 0.309 ±0.005 (57.85 ±0.13) 0.589±0.005 (14.96 ±0.13) 1.620 TYP (41.10 ±0.51) 0.156 TYP. (3.96) 2.06 MAX. (52.32) 0.25 TYP. (6.35) 0.032 TYP (0.81) 1.00 ±0.010 (25.40) 1.04 MAX (26.42) 0.047 TYP. (1.19) 1.10 MAX (27.94) PRINTED CIRCUIT MOUNTING HOLE LAYOUT WIRING DIAGRAM ( BOTTOM VIEW ) (VIEWED FROM PIN END) 0.203 TYP. (5.16) 0.162 (4.42) 6 8 0.052 (1.32) TYP. ALL HOLES 0 1 0.185 TYP. (4.70) 0.072 (1.83) TYP. ALL HOLES 6 8 7 2 4 DPST-N.O. 2 4 3 0 1 DPDT COIL MEASURED @ 25˚C 1.00 ± 0.01 (25.4) NOTE: VENT TAPE MUST BE REMOVED TO ACHIEVE LISTED RATINGS STANDARD PART NUMBERS NOMINAL NOMINAL CONTACT RESISTANCE INPUT CONFIGU(OHMS) VOLTAGE RATION AC OPERATED COIL PRINTED CIRCUIT MOUNT, 30 AMP 24 VAC DPST-NO W92S7A12-24 120 VAC DPST-NO W92S7A12-120 240 VAC DPST-NO W92S7A12-240 24 VAC DPDT W92S11A12-24 120 VAC DPDT W92S11A12-120 240 VAC DPDT W92S11A12-240 DC OPERATED COIL PRINTED CIRCUIT MOUNT, 30 AMP 12 VDC DPST-NO W92S7D12-12 24 VDC DPST-NO W92S7D12-24 48 VDC DPST-NO W92S7D12-48 110 VDC DPST-NO W92S7D12-110 12 VDC DPDT W92S11D12-12 12 VDC DPDT W92S11D12-24 48 VDC DPDT W92S11D12-48 110 VDC DPDT W92S11D12-110 86 Ω 350 Ω 1,390 Ω 7,255 Ω 86 Ω 350 Ω 1,390 Ω 7,255 Ω 7...10 CLASS 7 PRINTED CIRCUIT BOARD SUBMINIATURE RELAY SPDT & DPDT 2AMP R.F. PERFORMANCE TABLE FREQUENCY (MHZ) INSERTION LOSS ISOLATION VSWR (DB) (DB) COMMON TO N.O. OR N.C. COMMON TO N.O. OR N.C. CONTACTS N.O. OR N.C. CONTACTS CONTACTS TO COIL 10 50 100 200 300 400 500 0.05 0.10 0.30 0.50 0.60 0.65 0.75 1.03:1 1.04:1 1.05:1 1.06:1 1.07:1 1.08:1 1.10:1 c us UL Recognized File No. E52197 65 50 42 35 31 29 28 THE CLASS 7 SUBMINIATURE HIGH * AVAILABLE WITH SPDT OR DPDT BIFURCATED GOLD CLAD RELIABILITY INDUSTRIAL GRADE SILVER-PALLADIUM CROSS BAR CONTACTS- RATED FOR RELAY HAS EXCELLENT R.F. SWITCHING CHARACTERISTICS. LOW LEVEL TO 2.0 AMP SWITCHING. * REQUIRES ONLY .155 SQUARE INCH OF CIRCUIT BOARD SPACE. * TOTAL VOLUME OF LESS THAN A CUBIC CENTIMETER. * CONFORMS TO FCC PART 68.302. 1500 V PEAK SURGE RESISTANCE. * CONFORMS TO FCC PART 68.304. 1000 V DIELECTRIC WITHSTANDING VOLTAGE. GENERAL SPECIFICATIONS COIL Pull-in Voltage: Dropout Voltage: Max. Voltage: Resistance: Coil Power: Max. Coil Dissipation CONTACTS Contact Material: Contact Rating: Contact Resistance: TIMING Operate Time: Release Time: 80% of nominal voltage or less 10 % of nominal voltage or more 120% of nominal voltage, duty cycle: 100%. ±10% 327 milliwatts max., min sensitivity: 200 milliwatts. 0.75 watts. -35˚C to +70˚C VIBRATION RESISTANCE Functional: SHOCK RESISTANCE Functional Mechanical: LIFE EXPECTANCY Gold clad silver palladium. Electrical: SPDT: 50 uA @ 50mV, 2A , 24 VDC, 2A, 120 VAC, DPDT: 50 uA @ 50mV, 2A, 24 VDC, Mechanical: 0.6A, 100 VAC, initial 50 mΩ 100 milliohms max @ 6 VDC 10 milliamps. MISCELLANEOUS Terminal Finish: 4.0 mS max. @ nominal voltage typ. 5.0 mS max. @ nominal voltage typ. DIELECTRIC STRENGTH All Mutually Insulated Points: 500 VAC for 1 minute, 1 milliamp max. leakage, or 600 VAC for 1 second, 1 milliamp leakage. Surge Test: Meets FCC 68.302 ( 1500V surge ) and 68.304 ( 1000V dielectric ). Insulation Resistance: 500 VDC exceeds 1000 megohms. 7...11 TEMPERATURE Operating: 50g's 6mS half sine Destructive: 150 g's. 100,000 operations- 2 Amp 24 VDC, 1.0 Amps 120VAC @ rated resistive load. 100,000,000 operations @ no load Operating Position: Enclosure: Weight: PHONE: ( 843 ) 393-5778 15 g's, 10 to 2000 Hz, no contact opening > 10 uS max. contact chatter destructive: 50 g'S. Terminals are solder coated and epoxy free to provide excellent solderability. Max. Exposure to soldering temperature is 5 seconds @ 250˚C. after cleaning process, pierce a small hole in cover for venting. Any UL, 94V-O plastic, epoxy sealed. 2.7 g Approx. FAX: ( 843 ) 393-4123 EMAIL: [email protected] CLASS 7 PRINTED CIRCUIT BOARD SUBMINIATURE RELAY SPDT & DPDT 2 AMP OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). PIERCE THRU VENT HOLE PRINTED CIRCUIT MOUNTING HOLE LAYOUT ( BOTTOM VIEW ) 0.410 MAX. (10.4) 0.300 MAX. (7.62) 0.410 MAX. (10.4) 0.100 (2.54) 0.428 MAX. (10.9) 0.125 (3.18) 0.100 TYP. (2.54) 0.024 X 0.012 (0.6 X 0.3) TOP VIEW SHOWN AT ACTUAL SIZE ON 0.1 GRID After cleaning process, pierce 0.40 (1mm) hole in cover for venting. COIL TEMPERATURE RISE I.C. OPERATE / RELEASE TIME E2 Rt 70˚ 50˚ 40˚ E2 R 20 30˚ 20˚ 10˚ OPERATE TIME 3 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 CLASS CLASS 7 7 2 SIZE COMPARISON OF STANDARD I. C. TO CLASS 7 RELAYS 1 RELEASE TIME 0 0˚ 0.3 COIL POWER CONSUMPTION 0.4 0.5 0.6 0.7 0.8 0.9 THE CLASS 7 RELAYS CAN BE DENSELY PACKED TOGETHER WITHOUT MAGNETIC INTERACTION FROM ADJACENT RELAYS. COIL APPLIED POWER (WATTS) COIL VOLTAGE E2 = Rt COIL RESISTANCE VALUE AFTER TEMP. WAS RAISED E2 R 20 = CLASS 7 4 MILLISECONDS TEMP. RISE C˚ 80˚ WIRING DIAGRAM (VIEWED FROM PIN END) COIL VOLTAGE AT 20˚C COIL RESISTANCE VALUE DPDT SPDT COIL MEASURED @ 25˚C STANDARD PART NUMBERS CONTACT CONFIGURATION W7PCX-1 W7PCX-3 W7PCX-4 SPDT SPDT SPDT 5 VDC 12 VDC 24 VDC 75 Ω 440 Ω 1550 Ω W7PCX-5 W7PCX-7 W7PCX-8 DPDT DPDT DPDT 5 VDC 12 VDC 24 VDC 75 Ω 440 Ω 1550 Ω NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) 7...12 CLASS 60 PRINTED CIRCUIT BOARD MINIATURE RELAY SPDT & DPDT 2 AMP R.F. PERFORMANCE TABLE FREQUENCY (MHZ) INSERTION LOSS ISOLATION VSWR (DB) (DB) COMMON TO N.O. OR N.C. COMMON TO N.O. OR N.C. CONTACTS N.O. OR N.C. CONTACTS CONTACTS TO COIL 10 50 100 200 300 400 500 0.05 0.10 0.30 0.50 0.60 0.65 0.75 1.03:1 1.04:1 1.05:1 1.06:1 1.07:1 1.08:1 1.10:1 c us UL Recognized File No. E52197 65 50 42 35 31 29 28 * AVAILABLE WITH SPDT OR DPDT BIFURCATED GOLD CLAD SILVER-PALLADIUM CROSS BAR CONTACTS- RATED FOR LOW LEVEL TO 2.0 AMP SWITCHING. * REQUIRES ONLY O.155 SQUARE INCH OF CIRCUIT BOARD SPACE. * TOTAL VOLUME OF LESS THAN A CUBIC CENTIMETER. * CONFORMS TO FCC PART 68.302. 1500 V PEAK SURGE RESISTANCE. * CONFORMS TO FCC PART 68.304. 1000 V DIELECTRIC WITHSTANDING VOLTAGE. GENERAL SPECIFICATIONS COIL Pull-in Voltage: Dropout Voltage: Max. Voltage: Resistance: Coil Power: Max. Coil Dissipation: CONTACTS Contact Material: Contact Rating: Contact Resistance: TIMING Operate Time: Release Time: Contact Bounce: 80% of nominal voltage or less 10% of nominal voltage or more 120% of nominal voltage, duty cycle 100% ±10% measured @ 25˚C 327mW max. Min. sensitivity: 200 mW 0.75 watt Gold clad silver palladium. Low level: 50uA- 50mV, SPDT: 2 A-24 VDC, 2A-120 VAC, DPDT: 2 A-24 VDC, 0.6A-100 VAC, Initial 50 milliohms @ 6 VDC, 10mA, 100 milliohms max. 4.0 mS max. @ nominal voltage. 10.0 mS max. @ nominal voltage. 2.5 mS operate, 5.0 mS release DIELECTRIC STRENGTH All Mutually Insulated Points: 500 VAC for 1 minute, 1 milliamp max. leakage, or 600 VAC for 1 second, 1 milliamp leakage. Surge Test: Meets FCC 68.302 ( 1500V surge ) and 68.304 ( 1000V dielectric ). Insulation Resistance: 500 VDC exceeds 1000 megohms. 7...13 TEMPERATURE Operating: -35˚C to +70˚C VIBRATION RESISTANCE Functional: SHOCK RESISTANCE Functional: Mechanical: LIFE EXPECTANCY Electrical: MISCELLANEOUS Terminal Finish: Operating Position: Enclosure: PHONE: ( 843 ) 393-5778 50g's, 6mS max. Contact chatter destructive 50g's. 100,000 operations @ rated rssistive load. 100,000,000 operations @ no load Mechanical: Weight: 15g's, 10 to 2000 Hz, no contact opening greater than 10µS Terminals are solder coated to provide excellent solderability. max. exposure to soldering temperature is 5 seconds @ 250˚C. Any Plastic. SPDT-5.5 g, DPDT- 9 g Approx. FAX: ( 843 ) 393-4123 EMAIL: [email protected] CLASS 60 PRINTED CIRCUIT BOARD MINIATURE RELAY SPDT & DPDT 2 AMP OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 1.10 MAX. (27.9) 1.10 MAX. (27.9) FIGURE “A” FIGURE “B” 0.570 MAX. (14.4) 0.010 (0.25) 0.175 MAX. (4.45) 0.010 (0.25) 0.175 MAX. (4.45) 0.025 SQ. PINS (0.64) 0.025 SQ. PINS (0.64) 0.105 MAX. (2.67) 0.092 MAX. (2.34) 0.600 MAX. (15.2) 0.570 MAX. (14.4) 0.895 MAX. (22.7) CIRCUIT DIAGRAMS (BOTTOM VIEW) PRINTED CIRCUIT MOUNTING HOLE LAYOUT (TOP VIEW SHOWN AT ACTUAL SIZE ON 0.1 GRID) SPDT FIG. A 0.040 DIA (1.01) TYP. W60HE1S DPDT FIG. B COIL MEASURED @ 25˚C STANDARD PART NUMBERS 0.040 DIA (1.01) TYP. W60HE2S CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) FIG. A W60HE1S-5DC W60HE1S-12DC W60HE1S-24DC W60HE1S-48DC FIG. B SPDT SPDT SPDT SPDT 5 VDC 12 VDC 24 VDC 48 VDC 75 440 1550 5250 W60HE2S-5DC W60HE2S-12DC W60HE2S-24DC W60HE2S-48DC DPDT DPDT DPDT DPDT 5 VDC 12 VDC 24 VDC 48 VDC 75 440 1550 5250 Ω 7...14 CLASS A178 PRINTED CIRCUIT BOARD STANDARD RELAY SPST- N.O. 15 AMPS & SPDT 10 AMPS UL CONTACT LOAD RATINGS TABLE SPDT LOAD VOLTAGE N.O. & N.C. LOAD N.O. LOAD LOAD GENERAL 10AMP 277 VAC RESISTIVE 120 VAC RESISTIVE 120 VAC 12 AMP GENERAL 125 VAC 15 AMP RESISTIVE 12 AMP 30 VDC MOTOR 120 VAC 1/4 HP 120 VAC BALLAST 120 VAC 15 AMP 3.75 AMP 480 VAC TUNGSTEN 120 VAC TV - 5 CLASS "B" & "F" COIL INSULATION SYSTEM. WITHSTANDS THE VAPOR AND SPRAY CLEANING OF MOST FLUXING SYSTEMS. TERMINALS ARE SOLDER COATED TO PROVIDE EXCELLENT SOLDERABILITY. SPSTN.C. LOAD 12 AMP 1/4 HP - OPERATIONS c 100,000 100,000 20,000 6,000 100,000 34,000 21,000 7,000 100,000 6,000 us UL Recognized File No. E195668 PART NUMBERS SHOWN AVAILABLE FROM YOUR LOCAL MAGNECRAFT & STRUTHERS-DUNN DISTRIBUTION. UL CLASS " F " COIL INSULATION SYSTEM AVAILABLE ON SPECIAL ORDER. CONTACT FACTORY. GENERAL SPECIFICATIONS COIL Pull-in Voltage: Dropout Voltage: Max. Voltage: Resistance: Coil Power: Insulation System: Duty: CONTACTS Contact Material: Contact Rating: Contact Resistance: Max. Switching Power: Min. Load: 75% of nominal voltage or less 10% min. of nominal voltage or more 110% ±10% measured @ 20˚C 0.36 watts, 48 VDC : 0.51watts Class "B" (130˚C per UL standart 1446) Continuous Silver alloy See "UL CONTACT LOAD RATING TABLE" 100 milliohms @ 24 VDC & 1 Amp max 2400 VA / 240 W 6 VDC / 0.1 A TIMING Operate Time: Release Time: 10 mS max. @ nominal voltage 5 mS max. @ nominal voltage DIELECTRIC STRENGTH Contacts to Coil: Across Open Contacts: Insulation Resistance: 1500 V rms 750 V rms 100 Megohms @ 500 VDC 7...15 TEMPERATURE Operating: Storage: -40˚C to +70˚C -40˚C to +80˚C VIBRATION RESISTANCE Functional: 10 to 55Hz dual amplitude 1.5 mm SHOCK RESISTANCE Functional: Mechanical: LIFE EXPECTANCY Electrical: 100,000 operations @ rated resistive load. 10,000,000 operations @ no load Mechanical: MISCELLANEOUS Operating Position: Enclosure: Weight: PHONE: ( 843 ) 393-5778 10 g' s 100 g' s Any Plastic, epoxy sealed, suitable for automatic circuit board processing. After cleaning process, pierce a small hole in cover for venting 10 g Approx. FAX: ( 843 ) 393-4123 EMAIL: [email protected] CLASS PRINTED CIRCUIT BOARD STANDARD RELAY A178 SPST- N.O. 15 AMPS & SPDT 10 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 0.750 MAX. (19) 0.611 MAX. (15.5) 0.630 MAX. (16) 0.012 MAX. (0.3) 0.020 MAX. (0.5) 0.197 MAX. (5) 0.020 MAX. (0.5) 0.039 MAX. (1) 0.039 MAX. (1) PRINTED CIRCUIT MOUNTING HOLE LAYOUT (BOTTOM VIEW) 0.051 MAX. (1.3) 4 PLACES 0.236 MAX. (6) 0.236 MAX. (6) 0.079 MAX. (2) 0.480 MAX. (12.2) 0.134 MAX. (3.4) WIRING DIAGRAMS 0.051 MAX. (1.3) 5 PLACES (VIEWED FROM PIN END) 0.236 MAX. (6) 0.236 MAX. (6) 0.079 MAX. (2) 0.480 MAX. (12.2) SPDT SPST-N.O. 0.134 MAX. (3.4) COIL MEASURED @ 25˚C STANDARD PART NUMBERS 15 AMPS A178URE1A-3DC A178URE1A-5DC A178URE1A-12DC A178URE1A-24DC A178URE1A-48DC 10 AMPS A178URE1-3DC A178URE1-5DC A178URE1-12DC A178URE1-24DC A178URE1-48DC CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE SPST-NO SPST-NO SPST-NO SPST-NO SPST-NO 3 VDC 5 VDC 12 VDC 24 VDC 48 VDC 25 Ω 70 Ω 400 Ω 1600 Ω 4500 Ω SPDT SPDT SPDT SPDT SPDT 3 VDC 5 VDC 12 VDC 24 VDC 48 VDC 25 Ω 70 Ω 400 Ω 1600 Ω 4500 Ω NOMINAL RESISTANCE (OHMS) 7...16 CLASS 49 PRINTED CIRCUIT BOARD ENCLOSED RELAY SPDT, 3, 5 & 10 AMPS UL CONTACT LOAD RATINGS TABLE CONTACT TYPE MATERIAL 3AMP SIL 5AMP SCO SCO 10AMP LOAD 3 AMP 15 AMP 5 AMP TV-3 PILOT DUTY 10 AMP 10AMP 10AMP 1/3 HP 1/8 HP TUNGSTEN 1/4 HP BALLAST 1/6 HP 15 AMP 480 VAC PILOT DUTY TV-5 TV-3 VOLTAGE c us UL Recognized File No. E52197 28 VDC, 120 VAC 28 VDC, 150 VAC, N. O. ONLY 28 VDC, 120 VAC 120 VAC B300 ( 120/240 VAC) 120/240 VAC 28 VDC 277 VAC 120 VAC 240 VAC, N. O. ONLY 277 VAC, N. C. ONLY 2AMP, 240W,120 VAC, N. C. ONLY 5AMP, 600W,120 VAC, N. O. ONLY 277 VAC, N. O. ONLY 480 VAC @ 277 VAC, SPDT 120/240 VAC, N. C. ONLY 28 VDC, 150 VAC, N. O. ONLY 2AMP MAX, 240/270 VAC B300 ( 120/240 VAC) 120 VAC, N. O. ONLY 120 VAC MANUFACTURED UNDER ISO 9002 & QS 9000 NOTES: SCO = SILVER CADMIUM OXIDE; SIL = SILVER. ONLY 1.1 CUBIC INCHES. VARIETY OF MOUNTING CONFIGURATIONS. TAPPED MOUNTING HOLES (49R1C4). TV 5 RATING AVAILABLE. STANDARD PILOT DUTY 240 VAC. MAGNETIC MOTOR CONTROLLER RATING 1/3 HP AT 120VAC. GENERAL SPECIFICATIONS COIL Pull-in Voltage: Dropout Voltage: Max. Voltage: Resistance: Duty: CONTACTS Contact Material: Contact Resistance: TIMING Operate Time: Release Time: DIELECTRIC STRENGTH Contacts to Coil: Across Open Contacts: Coil to Frame: Insulation Resistance: 7...17 VG, VW adj. (DC) = 75%, VF, VG adj. (AC) = 80% of nominal coil voltage or less. 10% of actual pull-in or more 120% max. ±10% Continuous Silver cad oxide (5, 10 Amp), silver, gold plated (3 Amp). 100 milliohms max. initial value @ 6 VDC, 1 Amp 10 mS typ. (25 mS max.) 7 mS typ. (10 mS max.) 1,500 V rms 500 V rms 1,500 V rms 1000 mΩ min. @ 500 VDC TEMPERATURE Operating: Storage: -55˚C to +85˚C -55˚C to +130˚C VIBRATION RESISTANCE Functional: 10 to 55 Hz @ 1.65mm displacement SHOCK RESISTANCE Functional: Mechanical: LIFE EXPECTANCY Electrical: 100,000 operations @ rated resistive load 50,000,000 operations @ no load Mechanical: MISCELLANEOUS Soldering Temperature: Operating Position: Enclosure: Weight: PHONE: ( 843 ) 393-5778 10 g's 100 g's 270˚C (518˚F) Max. for 5 seconds max Any Dust cover 42 g Approx FAX: ( 843 ) 393-4123 EMAIL: [email protected] CLASS 49 PRINTED CIRCUIT BOARD ENCLOSED RELAY SPDT, 3, 5 & 10 AMPS OUTLINE DIMENSIONS STYLE RE1C2 STYLE RE1C1 DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 0.759 MAX. (19.3) 0.759 MAX. (19.3) 1.25 MAX. (31.7) 1.25 MAX. (31.7) 1.14 MAX. (29.1) 1.14 MAX. (29.1) 0.186 TYP. (4.72) 0.21 (5.3) 0.593 (15) 0.31 (7.8) 0.21 (5.3) 0.453 (11.5) 0.379 (9.63) 0.313 (7.9) 0.31 (7.8) 1.015 (25.7) 0.150 (3.8) 0.843 (21.4) 0.594 (15) 0.546 (13.8) 0.131 (0.33) WIRING DIAGRAMS (VIEWED FROM PIN END) STYLE R1C4 STYLE RE1C2 STYLE RE1C1 R1C4 1.225 MAX. (31.1) 0.915 (23.2) 0.687 (17,4) 0.562 (14.2) SPDT 1.34 MAX. (34.1) 1.14 MAX. (29.1) COIL MEASURED @ 25˚C STANDARD PART NUMBERS 0.186 TYP. (4.72) 0.21 (5.3) 0.31 (7.8) 0.313 (7.9) 0.843 (21.4) 0.150 (3.8) 0.759 MAX. (19.3) 4-40 TAPPED HOLES (2 REQ.) CONTACT CONFIGURATION 3 AMP STYLE RE1C1 SPDT W49RE1C1VG-3DC-SIL SPDT W49RE1C1VG-5DC-SIL SPDT W49RE1C1VG-12DC-SIL SPDT W49RE1C2VF-6DC-SIL SPDT W49RE1C2VF-12DC-SIL SPDT W49RE1C2VF-24DC-SIL 5 AMP STYLE RE1C1 AND RE1C2 SPDT W49RE1C1VG-5DC-SCO SPDT W49RE1C1VG-12DC-SCO SPDT W49RE1C1VG-24DC-SCO SPDT W49RE1C2VF-6DC-SCO SPDT W49RE1C2VF-12DC-SCO SPDT W49RE1C2VF-24DC-SCO NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) 3 VDC 5 VDC 12 VDC 6 VDC 12 VDC 24 VDC 90 Ω 235 Ω 1350 Ω 410 Ω 1640 Ω 6560 Ω 5 VDC 12 VDC 24 VDC 6 VDC 12 VDC 24 VDC 235 Ω 1350 Ω 5400 Ω 410 Ω 1640 Ω 6560 Ω 10 AMP STYLE RE1C1 SPDT 100 Ω 5 VDC W49RE1C1VW-5DC-SCO SPDT 600 Ω 12 VDC W49RE1C1VW-12DC-SCO SPDT 2400 Ω 24 VDC W49RE1C1VW-24DC-SCO SOLDER TERMINALS, BRACKET MOUNTING 10 AMP STYLE RE1C4 SPDT 235 Ω 5 VDC W49R1C4VG-5DC-SCO SPDT 1350 Ω 12 VDC W49R1C4VG-12DC-SCO 10 AMP STYLE RE1C4 SPDT 100 Ω 5 VDC W49R1C4VW-5DC-SCO SPDT 2400 Ω 24 VDC W49R1C4VW-24DC-SCO 7...18 CLASS 976 PRINTED CIRCUIT BOARD SLIM - LINE RELAY SPDT & DPDT 5, 12 & 20 AMPS UL CONTACT LOAD RATINGS TABLE LOAD RESISTIVE INDUCTIVE LOAD VOLTAGE DPDT FIGURE “ A “ 250 VAC 30 VDC 250 VAC 30 VDC 250 VAC 30 VDC 5 AMP 5 AMP 7 AMP (N.O.) 7 AMP (N.O.) *2 AMP †2 AMP DPST - N.O. TV - 3 TV SPDT FIGURE “ B “ SPDT FIGURE “ C “ 20 AMP (120 VAC) 20AMP 16 AMP (UL - TUV.) 16 AMP (UL - TUV.) *8 AMP †8 AMP SPST - N.O. TV - 8 12 AMP 12 AMP 10 AMP(TUV) 10 AMP(TUV) *5 AMP †5 AMP SPDT - N.O. TV - 5 c us UL Recognized File No. E191122 TUV MANUFACTURED UNDER ISO 9002 & QS 9000 * COSØ = 0.4 (TUV) † L/R = 7mS (TUV) * UL CLASS "F" COIL INSULATION SYSTEM AVAILABLE. * AC COIL VOLTAGES. * UL RATED TV-3, TV-5 OR TV-8, N. O. ONLY. * CONTACTS RATED UP TO 20 AMP. * 8 MILLIMETERS MINIMUM. CLEARANCE. COIL TO CONTACTS. * DIELECTRIC STRENGTH: 5,000 V rms. GENERAL SPECIFICATIONS COIL Pull-in Voltage: Dropout Voltage: Max. Voltage: Resistance: Coil Power: Insulation System: Max. Coil Dissipation: Duty: CONTACTS Contact Material: Contact Rating: Contact Resistance: 85% of nominal voltage or less for AC 75% of nominal voltage or less for DC 30% min. of nominal voltage or more for AC 10% min. of nominal voltage or more for DC 110% ±10% measured @ 25˚C AC 1.2 VA, DC 0.54 watts @ nominal voltage Class “B” (130˚C per UL standart 1446) Class “F” available 1.5 VA (60Hz) @ 25˚C Continuous Silver cadmium oxide See: “UL CONTACT LOAD RATINGS TABLE” 100 milliohms min TIMING Operate Time: Release Time: 15 mS max. @ nominal voltage 10 mS max. @ nominal voltage DIELECTRIC STRENGTH Contacts to Coil: Across Open Contacts: Pole to Pole: Insulation Resistance: 5000 V rms; (8 mm creepage & clearance) 1000 V rms 2500 V rms 100 megohms 500 VDC 7...19 TEMPERATURE Operating: Storage: -20˚C to +55˚C -40˚C to +80˚C VIBRATION RESISTANCE Functional: 10 to 55 Hz dual amplitude 1.5 mm SHOCK RESISTANCE Functional: Mechanical: LIFE EXPECTANCY Electrical: Mechanical: MISCELLANEOUS Operating Position: Enclosure: Weight: PHONE: ( 843 ) 393-5778 10 g's (11mS) 100 g's (6mS) 100,000 operations @ rated resistive load 10,000,000 operations @ no load Any Plastic, epoxy sealed, suitable for automatic circuit board processing. After cleaning process, pierce a small hole in cover for venting 17 grams approx. FAX: ( 843 ) 393-4123 EMAIL: [email protected] CLASS PRINTED CIRCUIT BOARD SLIM - LINE RELAY 976 SPDT & DPDT 5, 12 & 20 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 0.512 MAX. (13.0) 1.161 MAX. (29.5) 1.00 MAX. (25.5) WIRING DIAGRAMS 0.016 TYP. (0.4) 0.051 TYP. (1.3) (VIEWED FROM PIN END) 0.177 MAX. (4.5) PRINTED CIRCUIT MOUNTING HOLE LAYOUT FIG. A ( BOTTOM VIEW ) 0.051 TYP. (1.3) 0.197 MAX. (5.0) FIG. B 0.295 MAX. (7.5) 0.787 MAX. (20.0) FIG. C FIG. “A” COIL MEASURED @ 25˚C 0.394 MAX. (10.0) 0.787 MAX. (20.0) FIG. “B” 0.787 MAX. (20.0) 0.276 MAX. (7.0) FIG. “C” STANDARD PART NUMBERS CONTACT CONFIGURATION DC OPERATED COIL, FIG. A 976XBXH-5D / 76EURCPCX-61 976XBXH-6D / 76EURCPCX-62 976XBXH-12D / 76EURCPCX-63 976XBXH-24D / 76EURCPCX-64 DC OPERATED COIL, FIG. B DPDT DPDT DPDT DPDT 5 VDC 6 VDC 12 VDC 24 VDC 47 Ω 68 Ω 270 Ω 1100 Ω 976XAX97H-5D / 76EURCPCX-146 976XAX97H-6D / 76EURCPCX-147 976XAX97H-12D / 76EURCPCX-148 976XAX97H-24D / 76EURCPCX-149 DC OPERATED COIL, FIG. C SPDT SPDT SPDT SPDT 5 VDC 6 VDC 12 VDC 24 VDC 976XAXH-5D / 76EURCPCX-14 976XAXH-6D / 76EURCPCX-15 976XAXH-12D / 76EURCPCX-16 976XAXH-24D / 76EURCPCX-17 AC OPERATED COIL, FIG. A 976XBXH-24A 976XBXH-120A 976XBXH-240A AC OPERATED COIL, FIG. B 976XAX97H-24A 976XAX97H-120A 976XAX97H-240A SPDT SPDT SPDT SPDT 5 VDC 6 VDC 12 VDC 24 VDC 47 Ω 68 Ω 270 Ω 1100 Ω 47 Ω 68 Ω 270 Ω 1100 Ω 4400 Ω DPDT DPDT DPDT 24 VAC 120 VAC 240 VAC 250 Ω 5,600 Ω 22000 Ω SPDT SPDT SPDT 24 VAC 120 VAC 240 VAC 250 Ω 5,600 Ω 22000 Ω SPDT SPDT SPDT 24 VAC 120 VAC 240 VAC 250 Ω 5,600 Ω 22000 Ω AC OPERATED COIL, FIG. C 976XAXH-24A 976XAXH-120A 976XAXH-240A NOMINAL INPUT VOLTAGE OTHER COIL VOLTAGES ARE AVAILABLE ON SPECIAL ORDER. CONTACT FACTORY FOR SPECIAL REQUIREMENTS. NOMINAL RESISTANCE (OHMS & VA) 7...20 CLASS 276 PRINTED CIRCUIT BOARD LOW PROFILE POWER RELAY SPST-N.O. & SPDT 10 AMPS UL CONTACT LOAD RATINGS TABLE SPST-NO SPDT 10 AMP 10 AMP 7 AMP 7 AMP MOTOR 120 VAC 1/6 HP 1/10 HP *POWER WATTS (VDC) VA 300 WATTS 2500 VA 210 WATTS 1750 VA RESISTIVE c ISO 9002 LOAD VOLTAGE/ CURRENT 240 VAC 30 VDC LOAD MANUFACTURED UNDER us UL Recognized File No. E190964 OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 0.807 MAX. (20.5) * Voltage and Power Ratings in the table Above are Independent Maximums and no Single Value is to be Exceeded. 0.5 MAX. (12.7) DTL COMPATIBLE SINGLE-SIDE STABLE DESIGN. 5KV SURGE RESISTANCE COIL TO CONTACT MEETS INTERNATIONAL SPACING OF 4 mm. 0.50 (12.7) GENERAL SPECIFICATIONS 0.394 MAX. (10) COIL Pull-in Voltage: Dropout Voltage: Max. Voltage: Resistance: Coil Power: 70% of nominal voltage or less 10% of nominal voltage or more 110% ±10% 200 mW approx CONTACTS Contact Material: Contact Resistance: Silver alloy 100 milliohms initial @ 6 VDC, 1 Amp 0.138 MAX. (3.5) 0.015 X 0.030 (0.4 X 0.8) 3 PLACES 0.020 DIA. (0.5) 2 COIL TERMINALS WIRING DIAGRAM PRINTED CIRCUIT MOUNTING HOLE LAYOUT (VIEWED FROM PIN END) (TOP VIEW SHOWN AT ACTUAL SIZE ON 0.1 GRID) TIMING Operate Time: Release Time: 10 mS max. @ nominal voltage 10 ms max. @ nominal voltage DIELECTRIC STRENGTH Contacts to Coil: Across Open Contacts: Surge Voltage Resistance: Insulation Resistance: 2000 V rms 1000 V rms 5000 V rms between coil and contacts 500 VDC exceeds 1000 megohms min SPDT SPST-N.O. TEMPERATURE Operating: Storage: -40˚C to +70˚C -40˚C to +100˚C VIBRATION RESISTANCE Functional: 10 to 55Hz, dual amplitude 1.5 mm SHOCK RESISTANCE Functional: 100g's 6 mS no damage LIFE EXPECTANCY Electrical: Mechanical: MISCELLANEOUS Operating Position: Enclosure: Weight: 7...21 COIL MEASURED @ 25˚C 100,000 operations @ rated resistive load 10,000,000 operations @ no load Any Plastic cover, epoxy sealed 5.5 grams approx. PHONE: ( 843 ) 393-5778 FAX: ( 843 ) 393-4123 STANDARD PART NUMBERS CONTACT CONFIGURATION 276AXXH-5D 276AXXH-6D 276AXXH-12D 276AXXH-24D SPST-NO SPST-NO SPST-NO SPST-NO 5 VDC 6 VDC 12 VDC 24 VDC 125 Ω 180 Ω 720 Ω 2880 Ω 276XAXH-5D 276XAXH-6D 276XAXH-12D 276XAXH-24D SPDT SPDT SPDT SPDT 5 VDC 6 VDC 12 VDC 24 VDC 125 Ω 180 Ω 720 Ω 2880 EMAIL: [email protected] NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) Your Contact for Relays SECTION MAGNECRAFT & STRUTHERS-DUNN 7 CROSS REFERENCE GUIDE AROMAT AMERICAN ZETTLER OMRON OMRON POTTER POTTER & & BRUMFIELD BRUMFIELD W90S1D12-5 AZ2150(or 2151)-1A-5DE G8P-1A4-DC5 T90S1D12-5 (CLASS F) W90S1D12-12 AZ2150(or 2151)-1A-12DE G8P-1A4-DC12 T90S1D12-12 (CLASS F) W90S1D12-24 AZ2150(or 2151)-1A-24DE G8P-1A4-DC24 T90S1D12-24 (CLASS F) W90S1D12-110 AZ2150(or 2151)-1A-110DE G8P-1A4-DC110 T90S1D12-110 (CLASS F) W90S5D12-5 AZ2150(or 2151)-1C-5DE G8P-1C4-DC5 T90S5D12-5 (CLASS F) W90S5D12-12 AZ2150(or 2151)-1C-12DE G8P-1C4-DC12 T90S5D12-12 (CLASS F) W90S5D12-24 AZ2150(or 2151)-1C-24DE G8P-1C4-DC24 T90S5D12-24 (CLASS F) W90S5D12-110 AZ2150(or 2151)-1C-110DE G8P-1C4-DC110 T90S5D12-110 (CLASS F) W90S1D42-5 JTN1aE-PA-F-DC5V AZ2150(or 2151)-1A-5DEF G8P-1A4-CF-DC5 T90S1D42-5 W90S1D42-12 JTN1aE-PA-F-DC12V AZ2150(or 2151)-1A-12DEF G8P-1A4-CF-DC12 T90S1D42-12;T9AS1D12-12 W90S1D42-24 JTN1aE-PA-F-DC24V AZ2150(or 2151)-1A-24DEF G8P-1A4-CF-DC24 T90S1D42-24 T9AS1D12-24 AZ2150(or 2151)-1A-110DEF G8P-1A4-CF-DC110 T90S1D42-110 W90S1D42-110 W90S5D42-5 JTN1E-PA-F-DC5V AZ2150(or 2151)-1C-5DEF G8P-1C4-CF-DC5 T90S5D42-5 W90S5D42-12 JTN1E-PA-F-DC12V AZ2150(or 2151)-1C-12DEF G8P-1C4-CF-DC12 T90S5D42-12 W90S5D42-24 JTN1E-PA-F-DC24V AZ2150(or 2151)-1C-24DEF G8P-1C4-CF-DC24 T90S5D42-24 AZ2150(or 2151)-1C-110DEF G8P-1C4-CF-DC110 T90S5D42-110 W90S5D42-110 AMERICAN ZETTLER POTTER & BRUMFIELD JTN1aE-TMP-F-DC5V AZ2100-1A-5DEF T9AS1D22-5 W9AS1D22-12 JTN1aE-TMP-F-DC12V AZ2100-1A-12DEF T9AS1D22-12 W9AS1D22-24 JTN1aE-TMP-F-DC24V AZ2100-1A-24DEF T9AS1D22-24 W9AS1D22-48 JTN1aE-TMP-F-DC48V AZ2100-1A-48DEF T9AS1D22-48 W9AS1D22-110 JTN1aE-TMP-F-DC110V AZ2100-1A-110DEF T9AS1D22-110 W9AS5D22-5 JTN1E-TMP-F-DC5V AZ2100-1C-5DEF T9AS5D22-5 W9AS5D22-12 JTN1E-TMP-F-DC12V AZ2100-1C-12DEF T9AS5D22-12 W9AS5D22-24 JTN1E-TMP-F-DC24V AZ2100-1C-24DEF T9AS5D22-24 W9AS5D22-48 JTN1E-TMP-F-DC48V AZ2100-1C-48DEF T9AS5D22-48 JTN1E-TMP-F-DC110V AZ2100-1C-110DE T9AS5D22-110 MAGNECRAFT & STRUTHERS-DUNN W9AS1D22-5 W9AS5D22-110 AROMAT AMERICAN ZETTLER OMRON OMRON POTTER POTTER & & BRUMFIELD BRUMFIELD W92S7A12-24 AZ2850-2A-24A G7L-2A-P-CB-AC24 T92S7A12-24 W92S7A12-120 AZ2850-2A-120A G7L-2A-P-CB-AC120 T92S7A12-120 W92S7A12-240 AZ2850-2A-240A G7L-2A-P-CB-AC240 T92S7A12-240 W92S11A12-24 AZ2850-2C-24A T92S11A12-24 W92S11A12-120 AZ2850-2C-120A T92S11A12-120 W92S11A12-240 AZ2850-2C-240A T92S11A12-240 W92S7D12-12 AZ2800-2A-12D G7L-2A-P-CB-DC12 T92S7D12-12 W92S7D12-24 AZ2800-2A-24D G7L-2A-P-CB-DC24 T92S7D12-24 W92S7D12-48 AZ2800-2A-48D G7L-2A-P-CB-DC48 T92S7D12-120 W92S7D12-110 AZ2800-2A-110D G7L-2A-P-CB-DC110 T92S7D12-240 W92S11D12-12 AZ2800-2C-12D T92S11D12-12 W92S11D12-24 AZ2800-2C-24D T92S11D12-24 W92S11D12-48 AZ2800-2C-48D T92S11D12-120 W92S11D12-110 AZ2800-2C-110D T92S11D12-240 MAGNECRAFT & STRUTHERS-DUNN MAGNECRAFT & STRUTHERS-DUNN MIDTEX W7PCX-1 MMS105 W7PCX-3 MMS102 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 7...22 Your Contact for Relays SECTION MAGNECRAFT & STRUTHERS-DUNN 7 CROSS REFERENCE GUIDE MIDTEX W7PCX-4 MMS124 W7PCX-5 MMS205 W7PCX-7 MMS212 W7PCX-8 MMS224 MAGNECRAFT & STRUTHERS-DUNN POTTER & & POTTER BRUMFIELD BRUMFIELD W60HE1S-5DC R50E2Y1-5V W60HE1S-12DC R50E2Y1-12V W60HE1S-24DC R50E2Y1-24V W60HE1S-48DC R50E2Y1-48V W60HE2S-5DC R50E2Y2-5V W60HE2S-12DC R50E2Y2-12V W60HE2S-24DC R50E2Y2-24V R50E2Y2-48V W60HE2S-48DC MAGNECRAFT & STRUTHERS-DUNN A178URE1A-3DC AMERICAN ZETTLER AROMAT NOT AVAILABLE OMRON OMRON NOT AVAILABLE G5LE-1A4(as is or ACD, or-ASI)-DC3 T7NS1D1-3 T7NS1D1-5 A178URE1A-5DC JS1a-5V NOT AVAILABLE G5LE-1A4(as is or ACD, or-ASI)-DC5 A178URE1A-12DC JS1a-12V NOT AVAILABLE G5LE-1A4(as is or ACD, or-ASI)-DC12 T7NS1D1-12 A178URE1A-24DC JS1a-24V NOT AVAILABLE G5LE-1A4(as is or ACD, or-ASI)-DC24 T7NS1D1-24 A178URE1A-48DC JS1a-48V NOT AVAILABLE G5LE-1A4(as is or ACD, or-ASI)-DC48 T7NS1D1-48 T7NS5D1-3 A178URE1-3DC NOT AVAILABLE NOT AVAILABLE G5LE-14(as is or ACD, or-ASI)-DC3 A178URE1-5DC JS1-5V AZ941-1CT-5DEB G5LE-14(as is or ACD, or-ASI)-DC5 T7NS5D1-5 A178URE1-12DC JS1-12V AZ941-1CT-12DEB G5LE-14(as is or ACD, or-ASI)-DC12 T7NS5D1-12 A178URE1-24DC JS1-24V AZ941-1CT-24DEB G5LE-14(as is or ACD, or-ASI)-DC24 T7NS5D1-24 A178URE1-48DC JS1-48V AZ941-1CT-48DEB G5LE-14(as is or ACD, or-ASI)-DC48 T7NS5D1-48 CORNELL CORNELL DUBILIER DUBILIER MAGNECRAFT & STRUTHERS-DUNN W49RE1C1VG-3DC-SIL 653-3K W49RE1C1VG-5DC-SIL 653-6K W49RE1C1VG-12DC-SIL 653-12K W49RE1C1VG-5DC-SCO 603-6B W49RE1C1VG-12DC-SCO 603-12B W49RE1C1VG-24DC-SCO 603-24B W49RE1C1VW-5DC-SCO 613-6B W49RE1C1VW-12DC-SCO 613-12B 613-24B W49RE1C1VW-24DC-SCO MAGNECRAFT MAGNECRAFT & STRUTHERS-DUNN STRUTHERS-DUNN & 7...23 POTTER POTTER & & BRUMFIELD BRUMFIELD AROMAT AMERICAN ZETTLER OMRON OMRON POTTER & BRUMFIELD 976XBXH-5D / 76EURCPCX-61 JW2SN-DC5V AZ733-2C-5DE G2R-24-DC5 RTE24005F 976XBXH-6D / 76EURCPCX-62 JW2SN-DC6V AZ733-2C-6DE G2R-24-DC6 RTE24006F RTE24012F 976XBXH-12D / 76EURCPCX-63 JW2SN-DC12V AZ733-2C-12DE G2R-24-DC12 976XBXH-24D / 76EURCPCX-64 JW2SN-DC24V AZ733-2C-24DE G2R-24-DC24 RTE24024F 976XAX97H-5D / 76EURCPCX-146 NOT AVAILABLE AZ755-1C-5DE G2R-1-E-DC5 RTD14005F 976XAX97H-6D / 76EURCPCX-147 NOT AVAILABLE AZ755-1C-6DE G2R-1-E-DC6 RTD14006F 976XAX97H-12D / 76EURCPCX-148 NOT AVAILABLE AZ755-1C-12DE G2R-1-E-DC12 RTD14012F RTD14024F RTD14048F 976XAX97H-24D / 76EURCPCX-149 NOT AVAILABLE AZ755-1C-24DE G2R-1-E-DC24 976XAX97H-48D / 76EURCPCX-150 NOT AVAILABLE AZ755-1C-48DE G2R-1-E-DC48 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. Your Contact for Relays SECTION 7 MAGNECRAFT MAGNECRAFT & STRUTHERS-DUNN STRUTHERS-DUNN & CROSS REFERENCE GUIDE POTTER POTTER & & BRUMFIELD BRUMFIELD AROMAT AMERICAN ZETTLER 976XAXH-5D / 76EURCPCX-14 JW1FSN-DC5V NOT AVAILABLE G2R-14-DC5 RTB14005F 976XAXH-6D / 76EURCPCX-15 JW1FSN-DC6V NOT AVAILABLE G2R-14-DC6 RTB14006F 976XAXH-12D / 76EURCPCX-16 JW1FSN-DC12V NOT AVAILABLE G2R-14-DC12 RTB14012F 976XAXH-24D / 76EURCPCX-17 JW1FSN-DC24V NOT AVAILABLE G2R-14-DC24 RTB14024F 976XAXH-48D / 76EURCPCX-18 JW1FSN-DC48V NOT AVAILABLE G2R-14-DC48 RTB14048F 976XBXH-24A G2R-24-AC24 RTE24524 976XBXH-120A G2R-24-AC120 RTE24615 976XBXH-240A G2R-24-AC240 RTE24730 976XAX97H-24A G2R-1-E-AC24 RTD34524 976XAX97H-120A G2R-1-E-AC120 RTD34615 976XAX97H-240A G2R-1-E-AC240 RTD34730 976XAXH-24A G2R-14-AC24 RTB14524 976XAXH-120A G2R-14-AC120 RTB14615 976XAXH-240A G2R-14-AC240 RTB14730 OMRON OMRON 110VDC COIL AVAILABLE ON CLASS 976 MAGNECRAFT & STRUTHERS-DUNN GUARDIAN W1330P-2C-24A 1330P-2C-24A W1330P-2C-120A 1330P-2C-120A W1335P-2C-12D 1335P-2C-12D W1335P-2C-24D 1335P-2C-24D THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. FOR PRINTED CIRCUIT BOARD RELAYS APPLICATION ENGINEERING ASSISTANCE Zhuhong Tang, PRODUCT MANAGER FAX: (847) 441-2522 EMAIL: [email protected] FAX ON DEMAND: 1-800-891-2957 DOCUMENT: 500 U. S. A . TELEPHONE: FAX: WEBSITE: EMAIL: (843) 393-5778 (843) 393-4123 www.magnecraft.com [email protected] EUROPE TELEPHONE: FAX: WEBSITE: EMAIL: 4989 / 75080310 4989 / 7559344 www.magnecraft.com [email protected] 7...24