ETC 2US3T1A1M2RE

Toggle Switches
Ultra-Minature - Sealed
Specifications:
Contact Rating
Mechanical Life
Contact Resistance
Minimum Insulation Resistance
Dielectric Strength
Operating Temperature
Materials:
Actuator
Housing and base
Switch Support
:
:
:
:
:
:
0.4 volt-amps (VA) maximum at 20V AC or DC maximum.
40,000 make-and-break cycles.
Below 100mΩ typical at 2 to 4V dc, 100mA.
500MΩ.
500VRMS at sea level.
-30°C to 85°C.
: Glass filled nylon 6/6, heat stabilized, with standard internal o-ring seal.
: Glass filled nylon 66 or 4/6, heat stabilized.
: Brass or steel, tin plated.
Pole Option
M2RE
SPDT
PCB Mounting
Dimensions : Millimetres (Inches)
Page 1
21/03/08 V1.1
Toggle Switches
Ultra-Minature - Sealed
Pole Option
M2RE
DPDT
PCB Mounting
Dimensions : Millimetres (Inches)
M6RE
SPDT
PCB Mounting
Dimensions : Millimetres (Inches)
M6RE
DPDT
PCB Mounting
Dimensions : Millimetres (Inches)
Page 2
21/03/08 V1.1
Toggle Switches
Ultra-Minature - Sealed
Pole Option
M7RE
SPDT
PCB Mounting
Dimensions : Millimetres (Inches)
M7RE
DPDT
PCB Mounting
Dimensions : Millimetres (Inches)
Soldering Process:
Manual soldering: Use soldering iron of 30 watts, controlled at 350°C approximately 5 seconds while applying solder.
Wave soldering:
Recommended soldering temperature
: 260 ±5°C.
Duration of solder immersion: 5 ±1 seconds (PCB is 1.6mm in thickness).
Soldering: Vapour phase.
Page 3
21/03/08 V1.1
Toggle Switches
Ultra-Minature - Sealed
Temperature Profile
Zone
Room Temperature
(°C)
Time
(seconds)
Pre-heat (A)
150°C
Minimum 120
Soak (B)
180°C to 200°C
Minimum 150
Peak (C)
200°C to 235°C
Minimum 30
Peak (D)
235°C to 260°C
Minimum 40
Peak (E)
260°C
Maximum 10
Specifications
Switch Function
Number Position 1
of Poles
Position 2
Connected Terminals/Schematic
Position 3
Position 1
Position 2
5-6
N/A
Position 3
On
None
SP
On
Mom
Model Number
2US1
Off
5-4
Open
2US2
2US3
On
On
2 - 3, 5 - 6
None
DP
N/A
Mom
On
Off
2 - 1, 5 - 4
2UD1
2UD2
On
Open
2UD3
Mom = Momentary
Page 4
21/03/08 V1.1
Toggle Switches
Ultra-Minature - Sealed
Specification Table
Description
Part Number
Switch, Ultraminiature, SPDT, On-Mom
2US2T1A1M2RE
Switch, Ultraminiature, SPDT, On-On
2US1T1A1M2RE
Switch, Ultraminiature, SPDT, On-Off-On
2US3T1A1M2RE
Switch, Ultraminiature, DPDT, On-Mom
2UD2T1A1M2RE
Switch, Ultraminiature, DPDT, On-On
2UD1T1A1M2RE
Switch, Ultraminiature, DPDT, On-Off-On
2UD3T1A1M2RE
Switch, Ultraminiature, Horizontal R/A, SPDT, On-Mom
2US2T1A1M6RE
Switch, Ultraminiature, Horizontal R/A, SPDT, On-On
2US1T1A1M6RE
Switch, Ultraminiature, Horizontal R/A, SPDT, On-Off-On
2US3T1A1M6RE
Switch, Ultraminiature, Horizontal R/A, DPDT, On-Mom
2UD2T1A1M6RE
Switch, Ultraminiature, Horizontal R/A, DPDT, On-On
2UD1T1A1M6RE
Switch, Ultraminiature, Horizontal R/A, DPDT, On-Off-On
2UD3T1A1M6RE
Switch, Ultraminiature, Vertical R/A, SPDT, On-Mom
2US2T1A1M7RE
Switch, Ultraminiature, Vertical R/A, SPDT, On-On
2US1T1A1M7RE
Switch, Ultraminiature, Vertical R/A, SPDT, On-Off-On
2US3T1A1M7RE
Switch, Ultraminiature, Vertical R/A, DPDT, On-Mom
2UD2T1A1M7RE
Switch, Ultraminiature, Vertical R/A, DPDT, On-On
2UD1T1A1M7RE
Switch, Ultraminiature, Vertical R/A, DPDT, On-Off-On
2UD3T1A1M7RE
Part Number Explanation:
T2
B2
M2
R
E
Actuator
Bushing
Terminations
Contact
Material
Seal
2MS4
Model
Number
Model Number
Actuator
Bushing
Terminations
Contact Material
Seal
RoHS Compliant
: 2US1 = SP On-None-On, 2US2 = SP On-None-Mom, 2US3 = SP On-Off-On, 2UD1 = DP On-None-On,
2UD2 = DP On-None-Mom and 2UD3 = DP On-Off-On.
: T1 = 3.80 High (std).
: A1 = 1.60 High (std).
: M2 = PVC Through Hole, M6 = Right Angle, PVC Through Hole and M7 = Vertical Right Angle, PVC
Through Hole.
: R = Gold.
: E = Epoxy (std).
Page 5
21/03/08 V1.1
Toggle Switches
Ultra-Minature - Sealed
Notes:
International Sales Offices:
AUSTRALIA – Farnell
FINLAND – Farnell
ITALY – Farnell
SPAIN – Farnell
Tel No:
Tel No:
Tel No:
Tel No:
++61 1300 361 005
++ 358 9 560 7780
++ 39 02 93 995 200
901 20 20 80
Fax No: ++61 1300 361 225
Fax No: ++ 358 9 345 5411
Fax No: ++ 39 02 93 995 300
Fax No: 901 20 20 90
AUSTRIA – Farnell
FRANCE – Farnell
SWEDEN – Farnell
Tel No:
Tel No:
Fax No: ++ 43 662 2180 670
Fax No: ++ 33 474 68 99 90
MALAYSIA –
Farnell-Newark
Tel No: ++ 60 3 7873 8000
Fax No: ++ 60 3 7873 7000
BELGIUM – Farnell
GERMANY – Farnell
NETHERLANDS – Farnell
SWITZERLAND – Farnell
Tel No:
Tel No:
Tel No:
++ 43 662 2180 680
++ 33 474 68 99 99
Tel No:
++ 46 8 730 50 00
Fax No: ++ 46 8 83 52 62
Fax No: ++ 32 3 227 3648
Fax No: ++ 49 89 613 59 01
Fax No: ++ 31 30 241 7333
Tel No: ++ 44 204 64 64
Fax No: ++ 44 204 64 54
BRAZIL – Farnell-Newark
HONG KONG –
Farnell-Newark
Tel No: ++ 852 2268 9888
NEW ZEALAND – Farnell
UK – Farnell
++ 55 11 4066 9400
Tel No:
Tel No:
Fax No: ++ 55 11 4066 9410
Fax No: ++ 852 2268 9899
Fax No: 0800 90 80 81
Fax No: ++ 44 8701 200 201
CHINA – Farnell-Newark
HUNGARY - Farnell
NORWAY – Farnell
UK – CPC
Tel No:
Tel No:
Tel No:
800 146 70
++ 44 8701 202 530
Tel No:
++ 32 3 475 2810
++86 10 6238 5152
++ 49 89 61 39 39 39
++ 44 870 1200 208
++ 31 30 241 7373
0800 90 80 80
++ 44 8701 200 200
Fax No: ++86 10 6238 5022
Fax No: ++ 44 870 1200 209
Fax No: 800 146 76
++ 44 8701 202 531
CZECH REPUBLIC - Farnell
INDIA - Farnell
PORTUGAL – Farnell
Tel No:
Tel No:
Tel No:
USA –
Newark
++ 44 870 1200 208
++ 44 870 1200 208
++ 34 93 475 8804
Fax No: ++ 44 870 1200 209
Fax No: ++ 44 870 1200 209
Fax No: ++ 34 93 474 5288
DENMARK – Farnell
IRELAND – Farnell
RUSSIA – Farnell
Tel No:
Tel No:
Tel No:
++ 45 44 53 66 44
Fax No: ++ 45 44 53 66 06
++ 353 1 830 9277
++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
Fax No: ++ 353 1 830 9016
Tel No:
export
800 463 9275
EXPORT – Farnell
Tel No:
++ 44 8701 200 208
Fax No: ++ 44 8701 200 209
For enquiries from all other markets
ESTONIA – Farnell
ISRAEL – Farnell
Tel No:
Tel No:
++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
SINGAPORE –
Farnell-Newark
Tel No: ++ 65 6788 0200
++ 180 937 0015
Fax No: ++ 180 937 0014
Fax No: ++ 65 6788 0300
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.
Page 6
21/03/08 V1.1