Bluetooth® Module Class 2 - Data - 1mW - 2.41/2.48GHz Technical specifications Features • Bluetooth 2.1 stack (Chipset CSR Bluecore4-Ext) Baseband - Link Manager - L2CAP - RFCOMM - SDP - SCO • Data profiles: SPP - OPP - DUN Performance • Frequency: FHSS / 2.402 to 2.480GHz • Radiated RF power: 2mW with integrated antenna • RF sensitivity: -86dBm (BER 10-3) • Range: up to 30m • Air rate: up to 3Mbps EDR Bluetooth® Module This miniature module (22 x 14 x 3 mm) allows a two-way Bluetooth® data transmission, up to 30m. It uses the 2.45GHz frequency world band. This module is Bluetooth® V2 certified under the «End Product» category, allowing customers integrating our solution, to use the Bluetooth® label. The data transmission and configuration are done via an UART serial interface «TTL» type. The radio rate goes from 723kbps to 3Mbps EDR. The miniature antenna is integrated (RF pin version also available). Power consumption & requirements • Operating voltage: 3.3V typ (from 2.85V to 3.6V) • Max TX consumption: 60mA • Typical RX consumption: 40mA • Standby consumption: 1 to 6mA Interfaces • UART with flow control • PCM • UART programmable speed: from 9.6 to 921.6kbps General information • Operating temperature: -40°C / +85°C • Dimensions: 22 x 14 x 3 mm • Standards: EN 300-328 / EN 301-489 / FCC part 15 / IC • Mounting: SMD In «Data» mode, the embedded SPP profile allows the module to establish a wireless serial link to a PDA, laptop, mobile phone or other device equipped with a Bluetooth® function. OPP profile allows you to send files to a Bluetooth® system. Pin configuration & Dimensions References BTC2-DATA Bluetooth® Module - Integrated antenna BTC2-DATA Bluetooth® Module - RF out pin Modules Bluetooth® Class2 283 rue Louis Néel - Parc technologique Pré Roux - 38920 CROLLES - France Tél. : +33 (0)4 76 92 07 77 - Fax : +33 (0)4 76 04 80 87 - E-mail : [email protected] - www.adeunis-rf.com V2.2 ARF7678AA ARF7678BA