PNI CONNECTOR 2.0mm pitch/Disconnectable Crimp style connectors Specifications ––––––––––––––––––– • Current rating: 3A AC, DC (AWG#22) • Voltage rating: 100V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 10m Ω max. After environmental testing/ 20m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 800V AC/minute • Applicable wire: AWG #28 to #22 • Applicable PC board thickness: 1.6mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. This is a 2.0mm pitch wire-to-board connector, having incomplete mating prevention mechanism. Standards––––––––––––––––––––––– • Inertial lock structure • Finger-friendly design • Secure locking structure 0 Recognized E60389 1 Certified LR20812 (6.65) A ±0.05 1.4 ±0.05 ±0.05 (12.25) 1.9 ±0.05 2 ＋0.1 0 φ0.7 ＋0.1 0 φ1.1 Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: ±0.05mm for all centers. 3. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 PNI CONNECTOR Contact Applicable wire Model No. mm2 Insulation O.D. (mm) Q’ty / reel SPND-001T-C0.5 0.13∼0.33 26∼22 1.0∼1.5 8,000 SPND-002T-C0.5 0.08∼0.22 28∼24 0.8∼1.5 8,000 Material and Finish 7.5 3 AWG # 1.5 3.9 Copper alloy, tin-plated (reflow treatment) 2.08 RoHS compliance Applicator Dies Crimping machine Crimp applicator Contact MKS-L SPND-001T-C0.5 AP-K2N SPND-002T-C0.5 Crimp applicator with dies MK/SPND-001-05 APLMK SPND001-05 − − − MK/SPAD/ND-002-05 APLMK SPAD/ND002-05 MKS-L − − − Housing <2 circuits> <7 to 10 circuits> 6.45 6.45 B 2 10.05 10.05 5.7 2 Circuit No.1 A Circuit No.1 <3, 4 circuits> 6.45 10.05 B 2 A Circuit No.1 Circuits Model No. 2 3 Dimensions (mm) Q’ty / bag A B PNIRP-02V-S ― 5.7 1,000 PNIRP-03V-S 4.0 7.7 1,000 4 PNIRP-04V-S 6.0 9.7 1,000 5 PNIRP-05V-S 8.0 11.7 1,000 6 PNIRP-06V-S 10.0 13.7 1,000 7 PNIRP-07V-S 12.0 15.7 1,000 8 PNIRP-08V-S 14.0 17.7 1,000 9 PNIRP-09V-S 16.0 19.7 1,000 10 PNIRP-10V-S 18.0 21.7 1,000 Material <5, 6 circuits> B Glass-filled PBT, UL94V-0, natural (white) 6.45 RoHS compliance 10.05 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. PNIRP-02V-S S…natural (white) M…green R…red E…blue H…gray LG…light green K…black Y…yellow 2 A Circuit No.1 2 PNI CONNECTOR Shrouded header Glass-filled PBT <2 to 7 circuits> Model No. Dimensions (mm) With boss A B 2 B02B-PNISK-1 2.0 6.0 1,000 3 B03B-PNISK-1 4.0 8.0 1,000 4 B04B-PNISK-1 6.0 10.0 500 5 B05B-PNISK-1 8.0 12.0 500 Circuits B 6.55 10.2 A Q’ty / box Material and Finish Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PBT, UL94V-0, natural (white) 3.4 RoHS compliance This product displays (LF)(SN) on a label. Glass-filled PA 66 2 1.4 1.9 Model No. Dimensions (mm) With boss A B 2 B02B-PNISK-1A 2.0 6.0 1,000 3 B03B-PNISK-1A 4.0 8.0 1,000 4 B04B-PNISK-1A 6.0 10.0 500 5 B05B-PNISK-1A 8.0 12.0 500 6 B06B-PNISK-1A 10.0 14.0 350 7 B07B-PNISK-1A 12.0 16.0 300 8 B08B-PNISK-1A 14.0 18.0 250 9 B09B-PNISK-1A 16.0 20.0 250 10 B10B-PNISK-1A 18.0 22.0 250 Circuits <8 to 10 circuits> 6.55 B 10.2 A Q’ty / box Material and Finish 3.4 Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (white) RoHS compliance This product displays (LF)(SN) on a label. 2 1.4 3 1.9 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B02B-PNISK-1 S…natural (white) M…green R…red E…blue H…gray K…black ex. B02B-PNISK-1A S…natural (white) M…green R…red E…blue H…gray LG…light green Y…yellow