SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS High heat resistance, 125C Upgrade! @ESR : Less than MVH @Endurance : 2,000 hours at 125C @Rated Voltage Range : 10 to 35V @Nominal capacitance range : 47 to 470MF @Solvent resistant type @RoHS Compliant MHB Lower ESR MVH ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life -40 to +125C 10 to 35Vdc P20%(M) (20C, 120Hz) I=0.01CV Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes) Rated voltage(Vdc) 10V 16V 25V 35V (20C, 120Hz) tanE (Max.) 0.24 0.20 0.16 0.14 Rated voltage(Vdc) 10V 16V 25V 35V Z(-25C)/Z(+20C) 2 2 2 3 (120Hz) Z(-40C)/Z(+20C) 3 3 3 4 The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours at 125C. Capacitance change [P30% of the initial value D.F. (tanE) [300% of the initial specified value Leakage current [The initial specified value HA0 : [6O ESR(-40C, 400kHz) JA0 : [4.5O The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 125C without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change [P30% of the initial value D.F. (tanE) [300% of the initial specified value Leakage current [The initial specified value ?DIMENSIONS [mm] ?PART NUMBERING SYSTEM 1 @Terminal Code : A 2 3 4 5 6 7 8 9 10 11 12 13 14 0.3max. LP0.5 D 8 10 AP0.2 L A B C 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 W 0.7 to 1.1 0.7 to 1.1 16 25 35 18 ?MARKING EX) 16V220MF @Rated voltage symbol 5j Rated voltage (Vdc) Symbol A 10 C 16 E 25 V 35 ?STANDARD RATINGS 10 17 Please refer to "Product code guide (surface mount type)" P 3.1 4.5 220 CHB WV(Vdc) 16 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47MF:470, 470MF:471) Taping code Terminal code Voltage code (ex. 10V:100, 35V:350) Series code Category P CP0.2 BP0.2 FDP0.5 W Size code HA0 JA0 15 E MH B A A A A D A A A A M A A A G Cap(mF) 330 470 100 220 100 220 330 47 100 100 220 Size code HA0 JA0 HA0 HA0 HA0 HA0 JA0 HA0 HA0 JA0 JA0 ESR (omax/100k to 400kHz) 20c 0.3 0.2 0.3 0.3 0.3 0.3 0.2 0.3 0.3 0.2 0.2 -40c 3.0 2.0 3.0 3.0 3.0 3.0 2.0 3.0 3.0 2.0 2.0 (1/1) Rated ripple current (mArms/125c, 100k to 400kHz) 240 330 240 240 240 240 330 240 240 330 330 Part No. EMHB100ADA331MHA0G EMHB100ADA471MJA0G EMHB160ADA101MHA0G EMHB160ADA221MHA0G EMHB250ADA101MHA0G EMHB250ADA221MHA0G EMHB250ADA331MJA0G EMHB350ADA470MHA0G EMHB350ADA101MHA0G EMHB350ADA101MJA0G EMHB350ADA221MJA0G CAT. No. E1001K