EPM-VID-3 PC/104-Plus Video Expansion Module ATi Rage Mobility video chip 8 MB video RAM LVDS, CRT and TV out 16.7 Million displayable colors PC/104-Plus form factor Highlights ATi Rage Mobility Video Chip M1 graphic accelerator provides outstanding performance. Extensive feature set and low power consumption. 8 MB Video RAM Allows high resolution display output and excellent screen refresh rates. 16.7 Million Displayable Colors 24-bit and 18-bit color supported on LVDS and CRT displays. Overview The EPM-VID-3 is a PC/104-Plus video expansion module for PC/104-Plus, EPIC, and EBX systems. It provides video output to flat panel, CRT, and composite video displays. It can be used as a primary or secondary video output device or as a temporary video device during system development and testing. The standard module provides connectors for LVDS, CRT and TV outputs. Custom versions are available with TTL flat panel outputs. Up to three simultaneous outputs are available, with driver support for two independent displays. CRT and TV outputs are automatically detected and configured through the video driver. Reprogrammable Video BIOS This PC/104-Plus module can be used to expand any PC/104-Plus compatible system. Additional PC/104-Plus or PC/104 modules can be stacked above the EPM-VID-3 module. MPEG-2 Decoding Like all VersaLogic products, the EPM-VID-3 is designed for high reliability and long-term availability and is backed by VersaLogic’s award-winning customer support. It is fully compatible with a wide selection of popular operating systems including most Windows and Real Time Operating Systems. It is thoroughly tested using Environmental Stress Screening (ESS) and functional testing, and includes a two-year limited warranty. Simplifies upgrades and customizations. Hardware-based MPEG-2 decode acceleration with DirectX® support. High Resolution Output Maximum 1600 x 1200 resolution output for CRT displays and 1024 x 768 for LVDS. 640 x 480 max. usable TV output on single displays. PC/104-Plus Pass-Through Feed-through connectors for PC/104 and PC/104-Plus connectors allow for use in combination with other modules above and below. Details The foundation of the EPM-VID-3 is the ATi Rage Mobility M1 graphic accelerator coupled with 8 MB of video RAM, which supports 18-bit and 24-bit color (16.7 million displayable colors) and CRT resolutions up to 1600 x 1200. LVDS and optional TTL output supports resolutions up to 1280 x 1024). Triview™ video output allow up to three simultaneous displays. Dual display combinations (supported under Windows only) include LVDS/CRT or LVDS/TV. The EPM-VID-3 features a customizable video BIOS including jumper-selectable flat panel modes. It is pre-programmed for simplified LVDS flat panel setup, and can be customized for other (TTL) panel types. This module is compatible with most Windows operating systems, Linux, QNX Neutrino, and Wind River VxWorks. Video drivers for this board are available for most Windows and Linux operating systems. Other OS platforms may require development of custom drivers to support advanced display capabilities. The EPM-VID-3 is compatible with PC/104-Plus systems, including most VersaLogic single board computers. VersaLogic Corporation • 3888 Stewart Road, Eugene, OR 97402 • (541) 485-8575 • Fax (541) 485-5712 • [email protected] • www.VersaLogic.com EPM-VID-3 PC/104-Plus Video Expansion Module Specif ications General Graphic Accelerator ATi Rage Mobility M1 Power Requirements +5V ±5% @475 ma Compatibility PC/104: pass-through PC/104-Plus: full compliance Board Size 3.55” x 3.775” Storage Temperature -40° to +85°C Operating Temperature 0° to +60°C Humidity Less than 95%, noncondensing Memory Video RAM 8 MB Video Desktop (CRT) Display Interface 18/24 bit, 1600 x 1200 max. resolution. 2 mm 12-pin latching header with CRT detect pins. LVDS Flat Panel Interface 18/24 bit, 1024 x 768 max. resolution. 20pin molex connector. Jumper-selectable settings for the following flat panel configurations: • 800 x 600 18-bit LVDS • 1024 x 768 18-bit LVDS • 800 x 600 24-bit LVDS • 1024 x 768 24-bit LVDS TTL Flat Panel Interface* 18/24 bit, 1280 x 1024 max. resolution. Requires custom VBIOS and jumper settings, and the addition of a 44-pin TTL FPD connector. TV-Out (Composite Video) Interface 1024 x 768 max. resolution (scaled to NTSC). 2 mm 10-pin latching header. Operating Systems Software compatible with Win95/98/NT/ CE/XP, Linux, QNX Neutrino, and Wind River VxWorks. Video BIOS Reprogrammable, VESA-compatible BIOS with four 64K areas (3 preprogrammed; one customizable). Mechanical Ordering Information EPM-VID-3........................................................ PC/104-Plus Video Module Accessories CBL-1010 .................................10-pin 2 mm latching / S-Video and TV Out CBR-1201.................... 12-pin 2 mm latching / 15-pin VGA adapter (RoHS) CBR-2010 . ............................. LVDS to FPD adapter cable, Hirose (RoHS) CBR-2011 ................................... LVDS to FPD adapter cable, JAE (RoHS) Software * Available on customized versions only. Data represent standard operation at 25°C with 5.0V supply unless otherwise noted. Specifications are subject to change without notice. PC/104 is a trademark of the PC/104 Consortium. DOC-05-114-R1 03-13-08 VersaLogic Corporation • 3888 Stewart Road, Eugene, OR 97402 • (541) 485-8575 • Fax (541) 485-5712 • [email protected] • www.VersaLogic.com