Z10-110~390 Description Mechanical Dimensions JEDEC D0-41 1.00 Min. .080 .107 DO-41 .031 typ. Dimensions in inch eatures ¬ For surface mounted applications ¬ 1.0 W power dissipation ¬ Ideally suited for automated assembly processes ¬ Excellent Clamping Capability ¬ .205 .160 Low Zener Impedance Mechanical Data ¬ Case: Molded plastic DO-41 ¬ Epoxy: UL 94V-0 rate flame retardant ¬ Terminals: Solderable per MIL-STD-202 method 208 ¬ Polarity: cathode band ¬ Mounting position: Any ¬ Weight: 0.34 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. SYMBOL VALUE UNIT Maximum Forward Voltage Drop at IF=10mA VF 1.2 V Power Dissipation (Note 1) PD 1.0 W RthJA 300 C/W TJ -55 to +150 Thermal Resistane Junction to Ambient Air Operating junction and Storage Temperature Range 2 NOTES : (1) Mounted on 5.0mm (.013mm thick) land areas. (2) Measurd on 8.3ms, single half-sine wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. o o C RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED STORAGE AND OPERATING TEMPERATURE RANGE -55 TO + 150℃ ELECTRICAL CHARACTERISTICS (TA=25℃UNLESS OTHERWISE NOTED) VF=1.2V MAX, IF = 200mA FOR ALL TYPES TYPE Z10-110 Z10-115 Z10-120 Z10-130 Z10-140 Z10-150 Z10-160 Z10-170 Z10-180 Z10-190 Z10-200 Z10-210 Z10-220 Z10-230 Z10-240 Z10-250 Z10-260 Z10-270 Z10-280 Z10-290 Z10-300 Z10-310 Z10-320 Z10-330 Z10-350 Z10-390 DYNAMIC IMPEDANCES ＠ 25℃TA ZENER BREAKDOWN VOLTAGE VZ V IZT mA ZZT ohms IZK mA ZZK ohms 110 115 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 350 390 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 750 750 850 1000 1200 1300 1500 2200 2200 2500 2500 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 8000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9500 9500 9500 9500 9500 NOTE︰STANDARD± 20%, SUFFIX〝A〞± 10%,SUFFIX〝B〞± 5% MAXIMUM REVERSE CURRENT ＠ MEASUREMENT VOLTAGE AND 25℃TA VR IR V µA 80 85 90 95 105 110 120 130 140 150 165 165 170 175 180 190 195 200 210 215 220 225 233 240 268 284 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 MAXIMUM FORWARD VOLTAGE ＠25℃TA ＠IF=0.2A VF V 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 RATING AND CHARACTERISTIC CURVES Z1-110 THRU 390 FIG. 2 - ZENER VOLTAGE VERSUS ZENER CURRENT FIG. 1 - MAXIMUM CONTINUOUS POWER DISSIPARION IZ, ZENER CURRENT (mA) REVERSE POWER DISSIPATION, WATTS 10 1 SINGLE PHASE HALF WAVF 60HZ RESISTIVE OR INDUCTIVE LOAD 0.375”(9.5mm) LEAD LENGTHS 5 2 1 0.5 0.2 0.1 100 0 25 50 75 100 125 150 175 150 200 250 300 350 400 450 VZ, ZENER VOLTAGE (VOLTS) LEAD TEMPERATURE, ℃ FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT,MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 10 1.0 0.1 1.0 .4 0.1 TJ=25℃ .04 .01 TJ=25℃ PULSE WIDTH=300us 1% DUTY CYCLE 0 20 40 60 80 100 120 PERCENT OF RATED ZENER VOLTAGE .01 .4 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL TEMPERATURE COEFFICIENTS θ VZ TEMPERATURE COEFFICIENT (mV/℃ ℃ ) ＠ IZT 4 1000 500 200 100 50 20 10 10 20 50 100 200 400 VZ ZENER VOLTAGE ＠IZT(VOLTS) 1000 140