Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 40A HIGH CURRENT SILICON BRIDGE RECTIFIERS BP40-005G THRU BP40-10G FEATURES z GLASS PASSIVATED CHIP JUNCTION z CURRENT RATING 40A z REVERSE VOLTAGE RATING UP TO 1000V z TYPICAL IR LESS THAN 1μA z HIGH TEMPERATURE SOLDERING: 260°C /10 SECOND z GLASS PASSIVATED CHIP JUNCTION HOLE FOR No.10 SCREW 1.13(28.7) 1.12(28.4) HOLE FOR No.10 SCREW 0.2〞(5.08)diam. 0.2〞 (5.08)diam. 0.652 (16.6) ＋ 0.657(16.7) 0.618(15.7) 0.728(18.5) 0.689(17.5) 1.13(28.7) 1.12(28.4) 0.752(19.10) 0.673(17.10) 0.565(14.35) 0.525(13.35) 0.25 (6.35) 0.094 MECHANICAL DATA (2.4) z CASE: METAL HEAT SINK CASE, ELECTRICALLY INSULATED diam z TERMINALS: UNIVERSAL .25”(6.3mm) FAST ON DIMENSIONS IN INCHES AND (MILLIMETERS) z MOUNTING METHOD: BOLT DOWN ON HEAT SINK WITH H* 0.442(11.23) SILICON THERMAL COMPOUND BETWEEN BRIDGE AND 0.432(10.97) MOUNTING SURFACE FOR MAXIMUM HEAT TRANSFER EFFICIENCY z WEIGHT: 20 GRAMS 0.042(1.07) 0.038(0.97) L* I* H* I* L* MIN 0.295(7.5) 0.74(18.80) 1.09(27.89) 1.200 (30.5) MIN H* 1.00(25.40) 0.90(22.86) DIM 0.469(11.90) 0.429(10.90) 0.442(11.23) 0.432(10.97) MAX 0.311(7.9) 0.84(21.30) - REMARK SUFFIX “S” THIN CASE SUFFIX “S” THIN CASE SUFFIX “S” THIN CASE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS, RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% BP40 BP40 BP40 BP40 BP40 BP40 BP40 UNITS RATINGS SYMBOL -005G -01G -02G -04G -06G -08G -10G MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 200 400 600 800 1000 V MAXIMUM RMS VOLTAGE VRMS 35 70 140 280 420 560 700 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 200 400 600 800 1000 V MAXIMUM AVERAGE FORWARD RECTIFIED OUTPUT CURRENT IO 40.0 A AT TC=55°C PEAK FORWARD SURGE CURRENT SINGLE SINE-WAVE IFSM 400 A SUPERIMPOSED ON RATED LOAD STORAGE TEMPERATURE RANGE TSTG - 55 TO + 175 °C OPERATING TEMPERATURE RANGE TOP BP40 -01G CASE SUFFIX No TERMINAL FAST ON TERMINALS WIRE LEAD TERMINALS IN LINE PIN CONFIGURATION °C - 55 TO + 175 ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) BP40 CHARACTERISTICS SYMBOL -005G MAXIMUM INSTANTANEOUS FORWARD VOLTAGE PER BRIDGE VF ELEMENT AT SPECIFIED CURRENT MAXIMUM REVERSE DC CURRENT AT RATE DC BLOCKING IR VOLTAGE PER ELEMENT NOTE: Suffix No. Versus Different Cases and Terminals NORMAL METAL CASE THIN METAL CASE BP40 -02G BP40 -04G BP40 -06G BP40 -08G UNITS 1.1 V 10 μA NORMAL PLASTIC CASE ALUMINUM BASE THIN PLASTIC CASE ALUMINUM BASE PS NO SUFFIX W S WS P PW PWS － － L LS BP40-005G THRU BP40-10G BP40 -10G Page: 1 RATINGS AND CHARACTERISTIC CURVES BP40-005G THRU BP40-10G FIG. 1 -MAXIMUM OUTPUT RECTIFIED CURRENT FIG. 4 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT WITH (400mm2×1.5mm) COPPER 35 AVERAGE FORWARD OUTPUT CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES 40 30 25 20 15 WITHOUT HEAT SINK 10 5 400 300 200 100 TJ=175ºC SINGLE SINE-WAVE (JEDEC Method) 40 1 1.5 2 3 4 5 6 7 8910 15 20 0 30 40 50 70100 NUMBER OF CYCLES AT 60HZ 20 40 60 80 100 120 140 160 180 CASE TEMPERATURE TC ºC FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT FIG. 2 - TYPICAL REVERSE CHARACTERISTICS AT TJ=25ºC CAPACITANCE, C.J. pF 1.0 0.1 500 400 300 250 200 TJ=25ºC f=1MHZ Vsig=50m Vp-p 150 100 60 .01 1 1.5 2 3 4 5 6 7 8910 15 20 0 20 40 60 80 100 120 140 30 40 50 70100 REVERSE VOLTAGE, VOLTS PERCENT OR RATED PEAK REVERSE VOLTAGE FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 .442（11.23） 500 .432（10.97） 100 1.13（28.7） 50 1.12（28.4） 10 － AC ＋ .550 （13.9） 5 .140（3.6） .75 （19.1） .120（3.05） .040（1.2） 1.0 .200 （5.1） TJ=25ºC 300us Pulse Width 1% Duty Cycle 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 BP35-L INSTANTANEOUS FORWARD VOLTAGE, VOLTS BP40-005G THRU BP40-10G IN LINE PIN CONFIGURATION (PLASTIC CASE) Page: 2