PRODUCT DATA SHEET Part Number: C8030 Revision Level: 07 1C 20 SBC FOAM FEP OA BS, 2C 18 AWG BC PVC LS, SIAMESE PLENUM PVC JKT Date: 05/14/2012 RG 59/U Type Coaxial & 2/C 18 AWG Siamese CCTV- Plenum Cable A. CONSTRUCTION A DIAMETERS 1) CONDUCTOR: #20 AWG Solid Bare Copper 0.032” nom. 2) 3) INSULATION: BRAID SHIELD: 0.0515” Wall Foamed Fluoropolymer Bare Copper Braid (95% Coverage) 0.135” nom. 0.162” nom. B. 1) 2) CONSTRUCTION B CONDUCTOR: INSULATION: #18 AWG 7/.0152 Bare Copper 0.007” Wall Plenum Polyvinyl Chloride 0.046” nom. 0.060” nom. 3) COLOR CODE Black, Red 4) CABLE: 2 conductors @ 2.00 LHL C. 1) FINAL CABLE JACKET: 0.015” Wall LS-Plenum PVC 2) PRINT LEGEND: D. INDUSTRY APPROVALS 0.120” nom. Major dim: 0.372” Nom Minor dim: (coax) 0.192” Nom Minor dim: (pair) 0.150” Nom CAROL (R) -- C8030 -- RG 59/U TYPE 75 OHM COAXIAL CABLE – 1C 20 AWG + 2C 18 AWG CL2P (ETL) OR CMP c(ETL)us 75C 3084997 — MADE IN USA (MFG CODE; MM/YY & TRU-MARK SEQ. FT. MKGS) UL Standards 13 National Electric Code UL & CSA Standards 444 National Electric Code EU 2002/95/EC E. ELECTRICAL PROPERTIES 1) 2) 3) 4) 5) 6) 7) 8) 9) TEMPERATURE: SUGGESTED WORKING VOLTAGE (Vrms): CONDUCTOR D.C. RESISTANCE A: CONDUCTOR D.C. RESISTANCE B: SHIELD RESISTANCE A: CAPACITANCE A: CAPACITANCE B: (Conductor -Conductor) CHARACTERISTIC IMPEDANCE A: ATTENUATION (A): Type CL2P (ETL) Article 725 Type CMP c(ETL)us Article 800 RoHS Compliant -10C to +75C 300V MAX 10.10 Ohms/1000 ft. nom. @ 20 C 6.65 Ohms/1000 ft. nom. @ 20 C 2.6 Ohms/1000 ft. nom. @ 20 C 16.3 pF/ft. @ 1 kHz nom. 24 pF/ft. @ 1kHz nom. 75 Ohms @ 1 MHz nom. FREQ. (MHz) 1 10 50 100 200 360 500 1000 Note: Data are subject to change without notice. Contact your Customer Service representative for latest information. dB/100 ft. 0.25 0.78 1.98 2.80 4.10 5.63 6.82 9.64 Rev. 4: correct ins thickness (A) from .065 to .0515, cond res from 5.6 to 6.65 ; shield resistance (A) from 1.9 to 2.6, add drawing, remove jacket color white, change cond from 18 7/26 to 18 7/.0152 change overall dimensions accordingly fix attn table and add rohs – GT 04/21/2010 Rev. 5: revise diameter tolerances to Nom / GT 08/04/2010 Rev.6: change to ETL and Tru-Mark print legend – GT 06/16/11 Rev. 7: added CL2P GT/ 5/14/12