www.breedelectronics.com 59045 and 59050 PCB Mount Features and Benefits File E61760(N) 57045,57050 Actuator F eatures Benefits Applications • 2 Part Magnetically Operated • Mounts directly into printed • Position and limit sensing • Security system switch • Door switch Proximity Sensor • Standard normally open and high voltage normally open contact configuration • Subminiature 17mm (0.700”) version available Moulded standoffs to allow board washing 59045,59050 Sensor • • • • circuit board No standby power requirement Operates through non-ferrous materials such as wood,plastic or aluminium Hermetically sealed,magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination Simple installation and adjustment DIMENSIONS A Max B Max C + .10 (0,25) D Max E + .015 (0,38) – 57045 (.170) 4,32 (.700) 17,78 See Note Below (.130) 3,3 57050 (.265) 6,73 (.900) 22,86 See Note Below (.180) 4,57 – 59045 (.170) 4,32 (.700) 17,78 (.600)15,24 (.130) 3,3 (.130) 3,30 59050 (.180) 4,57 (.900) 22,86 (.800) 20,32 (.170) 4,32 (.130) 3,30 Mounting: (.062) 1,57 thick board, (.125) 3,17 holes. 57045 on (.540) 13,72 and 57050 on (.720) 18,28 nom. centers. Recommended Activating Positions: Sensors and Matching Actuators (Note 2) Must Actuator Sensor Must Actuate Release .075 (1,90) .550 (13,97) 57045-000 59045-010 — .150 (3,81) .750 (19,05) 57050-000 59050-010 59050-020 Electrical Specifications and Operating Characteristics Contact Type F orm A SPST-NO Standar d Contact Rating Voltage Form A SPST-NO High Volta ge Watt - max. 10 10 Switching Vdc - max. 200 300 Breakdown Vdc - min. 250 450 Switching A - max. 0.5 0.5 Carry A - max. 1.0 1.5 Contact,Initial Ω - max. 0.2 0.2 Insulation Ω - min. 1010 1010 Capacitance Contact p F - typ. 0.3 0.2 Temperature Operating °C -40 to + 105 -20 to + 105 Storage °C -65 to + 105 -65 to + 105 Operate ms - typ. 1.0 1.0 Release ms - typ. 1.0 1.0 Shock 11ms 1⁄2 sine G - max. 100 100 Vibration 50-2000 Hz G - max. 30 30 Current Resistance Time Notes: 1. Board Mounting: 57045-000 requires (0.062) 1,57 thick board,(0.125) 3,17 dia.holes on (0.540) 13,72 nominal centers. 57050-000 requires (0.062) 1,57 thick board,(0.125) 3,17 dia.holes on (0.720) 18,28 nominal centers. INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request,HAMLIN will assist purchasers by providing information specific to any particular application.HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN. 2. Order Actuators as a separate item. 3. Underwriters Laboratories recognition. For details on electrical specifications,contact Hamlin,Inc. Breed Electronics USA Breed Electronics UK Tel: Tel: Breed Electronics German y Tel: Breed Electronics France Tel: 001 920 648 3000 • Fax:001 920 648 3001 • Email: [email protected] +44 (0)1379 649700 • Fax:+44 (0)1379 649702 • Email: [email protected] +49 (0) 6181 953660 • Fax:+49 (0) 6181 9536666 • Email: [email protected] +33 1 46 87 02 02 • Fax:+33 1 46 86 67 86 • Email: [email protected] PA GE 1 OF 1 ISSUE No:1 DATE:08/12/00 SIGNED:Antony Howell