8 7 6 5 4 [1.041 79.00 mm [3.110 in] 1 52.00 +- 0.00 0.18 mm [2.047 41.00 mm [1.614 in] +0.000 - 0.007 in ] +0.000 - 0.007 in D 5.85 mm [0.230 in] 5.00 mm [0.197 in] K 62.00 mm [2.441 in] 2 26.44 +- 0.00 0.18 mm 88.39 mm [3.480 in] D 3 56.00 +- 0.00 0.18 mm ] [2.205 +0.000 - 0.007 ] in C C 80.00 + 3.150 L 3.74 mm [0.147 in] K 0 .5 4 0 .5 0 + 0 .0 2 - 0 .0 2 1.85 +- 0.00 0.18 mm 1.50 mm [0.059 in] SECTION K-K mm in Inside Face to Face Dimension .75mm (.030") Deep Recess For Labels/Keypads etc. ASSEMBLY - VIEW FROM TOP 1.72 +0.00 - 0.18 [0.068 [0.073 ] in 2.00 mm [0.079 in] mm +0.000 - 0.007 +0.000 - 0.007 ] PROTECTION TO IP 65 Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Contact Factory [email protected] for quotes Solid models of this enclosure available in STEP or IGES. in 2.00 mm [0.079 in] B 33.93 mm [1.336 in] 30.93 mm [1.218 in] n3.50 mm x 8.00 mm v n7.00 mm x 2.00 mm 2X Fits 80mm (3.149") X 55.5mm (2.185") PCB Note: Aluminum extrusion has a tolerance of -/+ .02" n 5.00 mm x 0.60 mm 2X 62.00 mm [2.441 in] 50.31 mm [1.981 in] 41.52 mm [1.635 in] DETAIL L B R5.49 mm 2X [0.216 in] 33.93 mm 30.23 mm [1.336 in] [1.190 in] END PANEL - VIEW FROM OUTSIDE A A 1457C801 8 7 6 5 4 3 2 1