FEATURES Small size – Safety Agency approved – 85°C, 85% RH operating humidity range APPLICATIONS EMI filters – Line bypass – Across the line – Antenna coupling Operating Temperature Range Capacitance Tolerance AC voltage (50/60 Hz) -40°C to +110°C +10% at 1 kHz, 20°C CSA ENEC CQC UL 250/310 305 275 250/310 Tan δ .1% Max Dissipation Factor at 1 kHz and 20°C Capacitance Insulation Resistance @20°C (<70% RH)for 1 minute at 100VDC applied Self Inductance Dielectric Strength Humidity test Capacitance temperature coefficient Construction Electrodes Coating Lead terminations Terminal to Terminal Terminal to Case >30000 MΩ at 100VDC 15000 MΩ <0.33uF >5000 MΩ at 500VDC >30000 MΩ at 100VDC 5000 MΩxuF >0.33uF >5000 MΩ at 500VDC <1 nano-Henry per mm of lead spacing and lead length C<.0068uF, 1500 VAC or 2121 VDC applied for 60 Seconds C>.0068uF, 1000 VAC or 1768 VDC applied for 60 seconds Terminal to Terminal Cut-off current: 2A ac or 10mAdc Current limiting resistance: 1Ω/V 2050VDC applied between the terminals and case for 60 Seconds and 20°C Terminal to case Capacitance change Dissipation Factor change Insulation resistance change 1000 Hours at 85% RH, 85°C and 240VAC applied. <10% of initially measured value <1.0% at 1kHz >50% of initially specified value (T-T) -200ppm/°C, +100ppm/°C Metallized Polypropylene film Vacuum deposited Metal layers Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0) Lead free tinned copper leads All dimensions in (mm) * 17mm lead length available upon request Safety agency Standard X capacitors are used to suppress electrical noise by reducing the input impedance of the device incorporating the capacitor. X capacitors are connected across the supply line where failure of the capacitor will not result in personal exposure to electrical shock. X2 capacitors are to be used in applications where the peak voltage is <1200V. Voltage Class Class 2221 02 (.0047 to 10uF) 310 FOWX2* FOWX8* FOKY2^ FOKY8^ EMI Class 2221 51 (.0047 to 1.0uF) 250 Audio/video equipment ENEC (SEMKO) IEC 60384-14/ SE/0252-3 305 X2 CQC GB/T14472-1998 275 UL 1414(.0047 to 1uF) 310 UL 1283 (.0047 to 10uF) 310 UL CSA Certificate number E317135 E317132 241565 SE/07119 CQC07001021654 CQC07001021577 *Antenna coupling, Line bypass, across the line ^Electromagnetic interference filter X2 THB Capacitance (µF) IC PART NUMBER dv/dt Dims LxHxT (mm) (v/µ sec.) 0.047 473THB305KE 300 0.068 683THB305KE 300 0.1 104THB305KE 0.15 Class X2, High temperature, High humidity S (MM) d (MM) Capacitance (µF) IC PART NUMBER dv/dt Dims LxHxT (mm) (v/µ sec.) 18x12x6 15 0.8 0.47 474THB305KG 180 18x13x7 15 0.8 0.56 564THB305KG 180 300 18x13.5x7.5 15 0.8 0.56 564THB305KH 154THB305KE 300 18x13.5x7.5 15 0.8 0.68 0.15 154THB305KG 180 26x14.5x6 22.5 0.8 0.22 224THB305KG 180 26x15x7.5 22.5 0.22 224THB305KE 300 18x15x9 0.33 334THB305KE 300 0.33 334THB305KG 0.47 0.47 S (MM) d (MM) 26x19x10 22.5 0.8 26x20x10 22.5 0.8 180 26x20x11.5 22.5 0.8 684THB305KG 180 26x20x11.5 22.5 0.8 0.68 684THB305KH 120 31x20x10 27.5 0.8 0.8 0.82 824THB305KG 180 26x22x12 22.5 0.8 15 0.8 0.82 824THB305KH 120 31x21x11 27.5 0.8 18x18x10 15 0.6 1 105THB305KG 180 26x24x13.5 22.5 0.8 180 26x17x8 22.5 0.8 1 105THB305KH 120 31x22x13 27.5 0.8 474THB305KH 120 31x18x9 27.5 0.8 1.5 155THB305KH 120 31x24.5x15 27.5 0.8 474THB305KE 300 18x19x12.5 15 0.8 2.2 225THB305KH 120 31x28x18 27.5 0.8