SAW Bandpass Filter F1G64 Features RF Bandpass Filter High attenuation balanced-single operation ( balance 200Ω / single 50Ω ) Ceramic Surface Mounted Device (SMD) Package ( 3.0 mm * 3.0 mm ) RoHS Compliant Package Dimensions 3.00± 0.15 8 I 1G64 3 1 6 6 2 5 4 5 1.20 7 3 4 0.75 0.60 0.60 2 8 7 1.10± 0.15 3.00± 0.15 1 Pin Configurations Dimensions shown are nominal in millimeters 7 Input ( + ) Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 5 Input ( - ) 2 Output 1, 3, 4, 6, 8 Ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range ℃ -40 25 85 Storage Temperature Range ℃ -50 25 95 Power Handling Capability dBm - - 10 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G64 Rev. Date 2012-08-30 Rev. NCNH01-AS01 1/7 SAW Bandpass Filter F1G64 Specifications Fc = 1680.0 MHz Minimum Typical Maximum Unit Center Frequency ( Fc ) - 1680.0 - MHz Insertion Loss (1650~1710 MHz) - 3.1 5.0 dB Amplitude Ripple (1650~1710 MHz) - 1.0 2.0 dBp-p VSWR (1650~1710 MHz) - 1.8 2.5 0.3 ~ 1580.0 MHz 42 60 - 1800.0 ~ 3000.0 MHz 42 49 - Relative Attenuation Input/Output Impedance dB Balance 200 / Single 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G64 Rev. Date 2012-08-30 Rev. NCNH01-AS01 2/7 SAW Bandpass Filter F1G64 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) L1 = 8nH C1 = 0.5pF Marking Configuration 1) I 2) 1G64 3) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G64 Rev. Date 2012-08-30 Rev. NCNH01-AS01 3/7 SAW Bandpass Filter F1G64 Typical Performance ( at 25℃ ℃) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G64 Rev. Date 2012-08-30 Rev. NCNH01-AS01 4/7 SAW Bandpass Filter F1G64 Input / Output VSWR Charts Input / Output Smith Charts I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G64 Rev. Date 2012-08-30 Rev. NCNH01-AS01 5/7 SAW Bandpass Filter F1G64 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~ 15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F1G64 Rev. Date 2012-08-30 Rev. NCNH01-AS01 6/7 SAW Bandpass Filter F1G64 Carrier Tape Dimensions [unit : mm] A 3.40 ± 0.1 B 3.40 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G64 Rev. Date 2012-08-30 Rev. NCNH01-AS01 7/7