Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 D4UB05 THRU D4UB100 Single Phase 4.0 AMPS.Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 4.0 Amperes D3K FEATURES ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 250℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked Dimensions in inches and (millim eters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number D4UB D4UB D4UB D4UB D4UB D4UB D4UB 05 10 20 40 60 80 100 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TC =138℃ I(AV) 4.0 A IFSM 135 A VF 1.00 V Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage @ 2.0A 10 Maximum DC Reverse Current @ TA=25℃ IR 500 rated DC blocking voltage per leg TA = 125℃ μA Typical Thermal Resistance (Note 1) RθJA 55 (Note 2) RθJL 15 (Note 3) RθJC 1.5 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Operating Temperature Range Storage Temperature Range ℃/W NOTE：1. Junction to ambient,Without heatsink. 2. Junction to Lead,Without heatsink. 3. Junction to case,With heatsink. 1 Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 D4UB05 THRU D4UB100 RATING AND CHARACTERISTIC CURVES D4UB05 THRU D4UB100 FIG. 1-MAXIMUM NONO-REPETITIVE FORWARD SURGE FIG. 2-MAXIMUM FORWARD CURRENT DERATING CURVE CURRENT PER BRIDGE ELELMENT CASE TEMPERATURE.(℃) NUMBER OF CYCLES AT 60Hz FIG. 4-TYPICAL REVERSE CHARACTERISTICS PER FIG. 3-TYPICAL INSTANTANEOUS FORWARD BRIDGE ELEMENT CHARACTERISTICS PER BRIDGE ELEMENT PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) INSTANTANEOUS FORWARD VOLTAGE.(V) Note: Specifications are subject to change without notice. 2