KINGTRONICS RS1A-RS1M

Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
RS1A THRU RS1M
SURFACE MOUNT FAST RECOVERY RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
◆The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
◆For surface mounted applications
◆Fast switching for high efficiency
◆Low reverse leakage
◆Built-in strain relief,ideal for automated placement
◆High forward surge current capability
◆High temperature soldering guaranteed:250℃/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic body
Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.003 ounce, 0.093 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS
RS1A
RS1B
RS1D
RS1G
RS1J
RS1K
RS1M
UNITS
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
VOLTS
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
VOLTS
VDC
50
100
200
400
600
800
1000
VOLTS
Maximum DC Blocking Voltage
Maximum average forward rectified current
at TL=90℃
I(AV)
1.0
Amp
IFSM
30.0
Amps
VF
1.3
Volts
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current TA=25℃
5.0
IR
at rated DC blocking voltage TA=100℃
μA
50.0
Maximum reverse recovery time (NOTE 1)
trr
Typical junction capacitance (NOTE 2)
CJ
15.0
pF
RθJA
50.0
℃/W
TJ,TSTG
-65 to +150
℃
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
Note: 1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
150
250
500
ns
2.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas
1
Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
RS1A THRU RS1M
RATINGS AND CHARACTERISTIC CURVES RS1A THRU RS1M
Note: Specifications are subject to change without notice.
2