2SA1980 PNP Silicon Transistor PIN Connection Description • General small signal amplifier E Features B B C E • Low collector saturation voltage : VCE(sat)=-0.3V(Max.) • Low output capacitance : Cob=4pF(Typ.) • Complementary pair with 2SC5343 C TO-92 Ordering Information Type NO. Marking Package Code 2SA1980 A1980 TO-92 Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO -50 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -5 V Collector current IC -150 mA Collector power dissipation PC 500 mW Junction temperature Tj 150 °C Tstg -55~150 °C Storage temperature range Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-base breakdown voltage BVCBO IC=-100μA, IE=0 -50 - - V Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -50 - - V Emitter-base breakdown voltage BVEBO IE=-10μA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-50V, IE=0 - - -0.1 μA Emitter cut-off current IEBO VEB=-5V, IC=0 - - -0.1 μA DC current gain hFE* VCE=-6V, IC=-2mA 70 - 700 - - - -0.3 V 80 - - MHz Collector-emitter saturation voltage Transition frequency Collector output capacitance Noise figure VCE(sat) fT IC=-100mA, IB=-10mA VCE=-10V, IC=-1mA Cob VCB=-10V, IE=0, f=1MHz - 4 7 pF NF VCE=-6V, IC=-0.1mA f=1KHz, Rg=10KΩ - - 10 dB *: hFE rank / O : 70~140, Y : 120~240, G : 200~400, L : 300~700. KSD-T0A016-001 1 2SA1980 Electrical Characteristic Curves Fig. 2 IC - VBE ㎽ Fig. 1 PC - Ta Fig. 3 IC - VCE Fig. 4 hFE - IC Fig. 5 VCE(sat) - IC KSD-T0A016-001 2 2SA1980 Outline Dimension KSD-T0A016-001 3 2SA1980 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A016-001 4