PRODUCT DATASHEET Strada-SQ series last update 15/11/2013 Ordering number CA13509_STRADA-SQ-T2 Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Strada-SQ Assembly LUXEON M Black 25 x 25 mm 8.7 mm Square PMMA Ready FWHM Efficiency cd/lm Gerber File Asymmetric degrees 93 % 0.600 Available We recommend a minimum center to center spacing between S Ordering number CA13688_STRADA-SQ-T3 Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Strada-SQ Assembly LUXEON M Clear 25 x 25 mm 8.4 mm Square PMMA Ready FWHM Efficiency cd/lm Gerber File Asymmetric degrees 92 % 0.500 Available We recommend a minimum center to center spacing between S Ordering number CA13758_STRADA-SQ-FS-NP Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Strada-SQ Assembly LUXEON M Clear 25x25 mm 12.6 mm Square PMMA Ready FWHM Efficiency cd/lm Gerber File Asym degrees 92 % 0.900 Available FWHM Efficiency cd/lm Gerber File Asymmetric degrees 92 % 0.900 Available Ordering number CA13897_STRADA-SQ-FS Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Strada-SQ Lens LUXEON M Clear 25x25 mm 12.6 mm Square PMMA Ready December 5th 2013 17:03 Copyright Ledil Oy - Subject to change without prior notice - Page 1/4 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 PRODUCT DATASHEET Strada-SQ series last update 15/11/2013 Ordering number C13866_STRADA-SQ-CY Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Strada-SQ Lens LUXEON M Clear 25x25 mm 10.1 mm Square PMMA Ready FWHM Efficiency cd/lm Gerber File 120+115 degrees 94 % 0.410 Available FWHM Efficiency cd/lm Gerber File 120+115 degrees 94 % 0.410 Available FWHM Efficiency cd/lm Gerber File 154 degrees 93 % 0.250 Available FWHM Efficiency cd/lm Gerber File 154 degrees 93 % 0.250 Available Ordering number CA14219_STRADA-SQ-CY Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Strada-SQ Assembly LUXEON M Clear 25x25 mm 10.1 mm Square PMMA Ready Ordering number C12727_STRADA-SQ-VSM Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Strada-SQ Lens LUXEON M Clear 25 x 25 mm 6.8 mm Square PMMA Screw, pin, glue Ready Ordering number CA12891_STRADA-SQ-VSM Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Strada-SQ Assembly LUXEON M Clear 25 x 25 mm 6.95 mm Square PMMA Screw, pin, tape Ready December 5th 2013 17:03 Copyright Ledil Oy - Subject to change without prior notice - Page 2/4 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 PRODUCT DATASHEET Strada-SQ series last update 15/11/2013 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. December 5th 2013 17:03 Copyright Ledil Oy - Subject to change without prior notice - Page 3/4 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 PRODUCT DATASHEET Strada-SQ series last update 15/11/2013 GENERAL INFORMATION - Product series especially designed & optimized for LUXEON M series of LEDs. - Special care taken to make light distribution as uniform as possible. - Lens material optical grade PMMA with high UV and temperature resistance (105 degrees of Celcius / 220 degrees of Fahrenheit). Allows use of high current and temperature conditions. Please find more information about used material from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf - Fastening to heat sink with a PU foam adhesive tape of automotive grade. Please find fastening details by clicking link: http://www.ledil.com/datasheets/DataSheet_TAPE.pdf - Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glue options. http://www.ledil.com/datasheets/DataSheet_GLUES.pdf NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end product. For example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. NOTE 2: Assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. Slanted assembly might cause unbalanced bond to the surface. All surfaces where tape is applied must be clean, dry and free from grease and dirt. If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED manufacturer - this is important as cleaning shall under no circumstances damage LEDs or other electronics components on the PCB. Further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end product. For example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED manufacturer -this is important as cleaning shall under no circumstances damage LEDs or other electronics components on the PCB. Further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. December 5th 2013 17:03 Copyright Ledil Oy - Subject to change without prior notice - Page 4/4 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 21.5 c/c 4 4 25.4 2 c/c 3. 3 Bottom view Isometric view Tape 2 0.15 8.6 3 Detail A A 2 Front view 25 25 5 2 2 Top view 30 Beam direction c/c Minimum spacing Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class F, otherwise class M. According to DIN ISO 2768-2 Form and position: class K 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE STRADA-SQ-T2 Datasheet SIZE A4 SCALE D 1 PART NUMBER 3:2 WEIGHT - SHEET A 1/1