Cree® PLCC6 3 in 1 SMD LED CLV6A-FKB Data Sheet These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for outdoor signage applications. The encapsulation resin contains UV inhibitors to minimize the effects of long-term exposure to direct sunlight, resulting in stable light output over the life of the LED. FEATURES • RoHS Compliant •Size (mm): 5.5 x 5.5 APPLICATIONS •Dominant Wavelength (nm): Red (619-624 ) Green (520-540) Blue (460-480) •Luminous Intensity (mcd) Red (560 - 1120) Green (1120 - 2240) Blue (280 - 560) • Outdoor Full-Color Video Screen • Decorative lighting • Amusement •Water-Resistant (IPX5*) •Moisture Sensitivity Level: 3 •Lead-Free 2 D-CT1163.00 Data Sheet: CL * This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 50 35 35 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 130 140 140 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 450 400 450 °C/W Junction/ambient 3 chips on RTHJA 650 580 680 °C/W Junction/solder point 1 chip on RTHJS 230 230 200 °C/W Junction/solder point 3 chips on RTHJS 230 230 200 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Forward Current Note 1 Peak Forward Current Note 2 1000 V Note: 1. Single-color light. 2. Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Condition Symbol Wavelength at peak emission IF = 20 mA Dominant Wavelength Spectral bandwidth at 50% IREL max Viewing Angle at 50% IV IF = 20 mA Forward Voltage Luminous Intensity Reverse Current (max) Values G B λPEAK 630 527 470 nm IF = 20 mA λDOM 619~624 520~540 460~480 nm IF = 20 mA Δλ 24 38 28 nm 2θ½ 120 120 120 deg VF(avg) 2.0 3.2 3.2 V IF = 20 mA IF = 20 mA VR = 5 V VF(max) 2.6 4.0 4.0 V IV(min) 560 1120 280 mcd IV(avg) 700 1600 400 mcd IR 10 10 10 μA Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT1163.002 Unit R Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Intensity Bin Limit (IF = 20 mA) Red Bin Code Min. (mcd) Max. (mcd) K 560 M N Green Blue Bin Code Min. (mcd) Max. (mcd) Bin Code Min. (mcd) Max. (mcd) 710 P 1120 1400 G 280 355 710 900 Q 1400 1800 H 355 450 900 1120 R 1800 2240 J 450 560 • Tolerance of measurement of luminous intensity is ±10% Color Bin Limit (IF = 20 mA) Red Green Blue Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RB 619 624 G7 520 525 B3 460 465 G8 525 530 B4 465 470 G9 530 535 B5 470 475 Ga 535 540 B6 475 480 • Tolerance of measurement of dominant wavelength is ±1 nm Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT1163.002 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Order Code Table* Luminous Intensity (mcd) Kit Number Color CLV6A-FKB-CKNPRGJBB7a363 Blue CLV6A-FKB-CK1P1G1BB7R3R3 CLV6A-FKB-CM1Q1H1BB7R3R3 Dominant Wavelength (nm) Color Bin Min. (nm) Color Bin Max. (nm) Package Min. Max. Red 560 1120 RB 619 RB 624 Reel Green 1120 2240 G7 520 Ga 540 Reel 280 560 B3 460 B6 480 Reel RB 619 RB 624 Reel Red Any 1 Intensity bin from K(560) - N(1120) Green Any 1 Intensity bin from P(1120) - R(2240) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from G(280) - J(560) Any 1 hue bin from B3(460) - B6(480) Reel Red Any 1 Intensity bin from M(710) - N(1120) Green Any 1 Intensity bin from Q(1400) - R(2240) Any 1 hue bin from G7(520) - Ga(540) RB 619 RB 624 Reel Reel Blue Any 1 Intensity bin from H(355) - J(560) Any 1 hue bin from B3(460) - B6(480) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from K - N means only 1 intensity-bin (K or M or N) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or G8 or G9 or Ga) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT1163.002 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT1163.002 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT1163.002 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 7 CLD-CT1163.002 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 8 CLD-CT1163.002 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Reliability Tests and Results Test Applicable Standards Test Condition Note Number of Damaged Temperature Cycle JEITA ED-4701 100 105 -40°C~25°C~100°C~25°C 30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/45 Thermal Shock MIL-STD-202G -40°C~100°C 30 mins, 30 mins 100 cycles 0/45 Moisture Resistance JEITA ED-4701 200 203 10 cycles 0/45 High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/45 Temperature Humidity Storage JEITA ED-4701 100 103 TA=60°C RH=90% 500 hrs 0/45 Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/45 Water Proof Test* IEC 60529:2001 IP X5 Water flow rate 12.5 l/min 15min 0/45 High Temperature Life Test - TA=85°C IF=15 mA 1000 hrs 0/45 Life Test - TA=25°C IF: R=30mA G=35mA B=20mA 1000 hrs 0/45 High Humidity Heat Life Test - 60°C RH=90% IF=15 mA 500 hrs 0/45 Low Temperature Life Test - Ta=-40°C IF: R=30mA G=35mA B=20mA 500 hrs 0/45 Resistance to Soldering Heat(Reflow Soldering) JEITA ED-4701 300 301 Tsol=260°C,10sec (Pre treatment 30°C,70%,168hrs) 2 times 0/45 Vibration-variable Frequency MIL-STE-883 Method 2007 20G min, 20 to 2000Hz, 4cycles, 4mins, Each x,y,z / 0/45 Electrostatic Discharge Test AEC(Q101-001) Human body model 1000 V (Forward and reverse current conduct electricity each 1time) / 0/45 25°C~65°C~ 90%RH 24hrs/1cycle Water proof test*: The test is conducted on component level. It is strongly recommended the customers test the products for their application Failure Criteria Criteria for Judgment Item Symbol Test Condition Min. Max. Forward Voltage VF IF = 20 mA – Initial Data x 1.1 Reverse Current IR VR = 5 V - 100 μA Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 - Resistance to Soldering Heat - IF = 20 mA No dead lamps and visual damage Vibration-variable Frequency - IF = 20 mA No dead lamps and visual damage Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 9 CLD-CT1163.002 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Reflow Soldering • • • • The CLV6A-FKB is rated as a MSL 3 product. The recommended floor life out of bag is 24hrs. The best practices suggestion is to use the product as soon as possible when removed from the No.: bag. COTCO-05-0057 Document The temperature (Top surface of SMD LED) profile is as below: Rev. NO.: 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Solder Sn63-Pb37 Solder Soldering = Lead-free Use only = with CLV6A-FKB pad: 2.7 Average ramp-up rate =4ºC/s max Solder = Low Lead-Free Average ramp-up rate =4ºC/s max. Average ramp-up rate = 4ºC/s max Preheattemperature = 150ºC ~200ºC Preheattime = 100s max. Ramp-down rate =6ºC/s max. Ramp-down rate =6ºC/s max. Peaktemperature = 230ºC max. Peaktemperature = 250ºC max. Ramp-down rate = 6ºC/s max Peak temperature = 235ºC max Time within5ºC of actual Temperature = 10s Time within 5ºC of actual Peak Peak Temperature = 10s max Duration above 183ºC 80s Duration above 217ºC is 45sismax Only use LP6-NPP1-01-N1 max. max. 1.7 1.3 1.7 Preheattime = 100s max. Preheat time = 120s max Time within5ºC of actual Peak Temperature = 10s max. 0.475 5.65 Preheattemperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Duration above 217ºC is 80s max. [13] 8.2 Solder = Low Lead-free Average ramp-up rate =3ºC/s max. Preheattemperature = 130ºC ~170ºC Preheattime = 120s max. Ramp-down rate =6ºC/s max. Peaktemperature = 213ºC max. Time within3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad designfor heat dissipation (2-pin SMD LED): 7.0 2.6 CLD-CT1163.002 7.5 10 4.5 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Package • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 900 pcs per reel. 防潮珠。不可食 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 11 CLD-CT1163.002 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps