MARL 084-532-22

084 series
features
• LED Bulkhead Unit
• Available in a range of colours and voltages
• Featuring a metal base with polycarbonate lens
• Recommended for use as commercial and construction
site security lighting, and retail indication lighting
• Rail approved version available
• Outstanding reliability and optical performance
specifications
Ordering information and typical characteristics (Ta = 25°C)
Number
Colour
Luminous
Intensity
(mcd)
Wave
Length
(nm)
Operating
Temp.
(°C)
Storage
Temp.
(°C)
De-rating
Vac/dc
Current
DC
(mA)
Voltage
Graphs
084-501-22
Red
24
220
640
640
-40 - +100
-40 - +100
BB
084-521-22
Amber
24
220
690
600
-40 - +110
-40 - +110
AB
084-532-22
Green
24
220
870
520
-40 - +110
-40 - +110
AB
084-501-75
Red
110
40
640
640
-40 - +100
-40 - +100
BB
084-521-75
Amber
110
40
690
600
-40 - +110
-40 - +110
AB
084-532-75
Green
110
40
870
520
-40 - +110
-40 - +110
AB
084-997-75
White
110
40
1500
* See pg.2
-40 - +110
-40 - +110
AB
084-501-76
Red
230 Vac
20
640
640
-40 - +100
-40 - +100
BB
084-521-76
Amber
230 Vac
20
690
600
-40 - +110
-40 - +110
AB
084-532-76
Green
230 Vac
20
870
520
-40 - +110
-40 - +110
AB
084-930-76
Blue
230 Vac
20
310
460
-40 - +110
-40 - +110
AB
084-997-76
White
230 Vac
20
1500
* See pg.2
-40 - +110
-40 - +110
AB
^ = Voltage for 20mA product is Vf at 20mA, not Vopr
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 2.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: +44 (0)1229 582 430
f: +44 (0)1229 585 155 e: [email protected] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 084 - version 2013-10-01-173130
BS EN ISO 9001:2008
approved manufacturer
page 1 of 4
led bulkhead unit
Part
084 series
technical data
122
104
57
20 KNOCKOUT TYP 6 PLCS
62
123
= 63 =
= 36 =
= 36 =
= 127 =
241
17
104.1
120
17
64
6.5 KNOCKOUT
TYP 8 PLCS
Dimensions in mm (typical)
Not to scale
Series
Max. Power Dissipation (mW)
084
5000
063
*Typical emission colour White
x
0.280
0.264
0.283
0.296
y
0.248
0.267
0.305
0.276
Intensities (Iv) and colour shades of white (x,y co-ordinates) may vary between leds within a batch
de-rating information
Derating Graph BB
Derating Graph AB
50
Forward Current IF (mA)
Forward Current IF (mA)
40
30
20
10
0
0.0
20.0
40.0
60.0
80.0 100.0 120.0
Ambient Temperature Ta (°C)
40
30
20
10
0
0.0
20.0
40.0
60.0
80.0 100.0 120.0
Ambient Temperature Ta (°C)
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: [email protected] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 084 - version 2013-10-01-173130
BS EN ISO 9001:2008
approved manufacturer
page 2 of 4
084 series
also available
Part numbers also available in the 084 series:
Part
Voltage
Colour
Number
084-064-76-50
084-065-76-50
084-501-22-99
084-501-75-50
084-501-75-99
084-501-76-65
084-501-76-99
084-501-76-S
084-501-99-64
084-930-75
084-997-22
084-997-76-65
084-997-76-S
084-997-99-64
Vopr
Red
Green
Red
Red
Red
Red
Red
Red
Red
Blue
White
White
White
White
230 Vac 50 Hz
230 Vac 50 Hz
24 Vdc
110 Vac 50 Hz
110 Vac 50 Hz
230 Vac 50 Hz
230 Vac 50 Hz
230 Vac 50 Hz
110 Vac/dc
110 Vac 50 Hz
24 Vdc
230 Vac 50 Hz
230 Vac 50 Hz
110 Vac/dc
The products listed above illustrate all of the options available to order. These products may have custom modifications that
alter their operation beyond the generic information contained within this datasheet. Please contact sales for further
information.
RP = Reverse Polarity
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: [email protected] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 084 - version 2013-10-01-173130
BS EN ISO 9001:2008
approved manufacturer
page 3 of 4
084 series
design considerations
Single-Chip LEDs
All devices feature water clear high intensity LEDs as standard.
Product Evaluation
Filament replacement LEDs have been specifically designed to meet the primary objective of providing improved reliability.
Care should be taken to correctly simulate operating ambient light conditions to ensure that the correct device has been
selected to maximise viewing characteristics such as viewing angle, colour compatibility and on/ off contrast ratio.
Electro-Static Discharge (ESD)
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of
possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual
situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood
that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and
assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing
technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have
changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.
Power De-Rating
The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is
operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the
ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address
these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be
specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, marl should
be contacted if the device is to be operated at a temperature significantly higher than 25°C. Marl accept no liability for any
product that is operated higher than the stated voltage.
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: [email protected] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 084 - version 2013-10-01-173130
BS EN ISO 9001:2008
approved manufacturer
page 4 of 4