DATASHEET 160V MODULE FEATURES AND BENEFITS TYPICAL APPLICATIONS 160V DC working voltage Passive balancing Wind pitch control Short-term UPS Renewable energy systems PRODUCT SPECIFICATIONS ELECTRICAL BMOD0006 E160 B02 Rated Capacitance 5.8 F 1 Minimum Capacitance, initial 5.8 F 1 Maximum ESR DC , initial 220 mΏ 1 Rated Voltage 160 V Absolute Maximum Voltage11 170 V Maximum Continuous Current (∆T = 15 °C) 7.0 A RMS 2 Maximum Continuous Current (∆T = 40 °C) 13.0 A RMS 2 Maximum Peak Current, 1 second (non-repetitive) Leakage Current, maximum (Passive Balancing) 3 200 A 25 mA 4 Maximum Series Voltage 660 V TEMPERATURE Operating Temperature (Ambient Temperature) Minimum -40°C Maximum 65°C 12 Storage Temperature (Stored Uncharged) Minimum -40°C Maximum 70°C PHYSICAL Mass, typical 5.1 kg Power Terminals M5 Thread Recommended Torque - Terminal 4.0 Nm Vibration Specification IEC60068-2-6 Shock Specification IEC60068-2-27,-29 Environmental Protection (except terminals) IP54 Cooling Page 1 Natural Convection Document number: 3000246.1 maxwell.com DATASHEET 160V MODULE PRODUCT SPECIFICATIONS (Cont’d) MONITORING / CELL VOLTAGE MANAGEMENT BMOD0006 E160 B02 Internal Temperature Sensor N/A Temperature Interface N/A Cell Voltage Monitoring Voltage Center Tap Connector M4 Cell Voltage Management Passive POWER AND ENERGY Usable Specific Power, Pd 5 Impedance Match Specific Power, Pmax Specific Energy, E max 2700 W/kg 5600 W/kg 6 4.0 Wh/kg 7 Stored Energy, E Stored 20.6 Wh LIFE High Temperature12 (at Rated Voltage and Maximum Operating Temperature) 1500 hours Capacitance Change (% decrease from minimum initial value) 20% ESR Change (% increase from maximum initial value) 100% Room Temperature1 10 years (at Rated Voltage and 25 °C) Capacitance Change (% decrease from minimum initial value) 20% ESR Change (% increase from maximum initial value) 100% Cycle Life 500,000 cycles 1,9 Capacitance Change (% decrease from minimum initial value) 20% ESR Change (% increase from maximum initial value) 100% Test Current 35 A Shelf Life 1,10 (Stored uncharged up to maximum storage temperature) 2 years SAFETY Short Circuit Current, typical 730 A (Current possible with short circuit from rated voltage. Do not use as an operating current.) High-Pot Test 13 5600 V DC Certifications Page 2 Document number: 3000246.1 RoHS maxwell.com DATASHEET 160V MODULE TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS BMOD0006 E160 B02 Thermal Resistance (R ma Module Case to Ambient), typical N/A Thermal Resistance (R ca All Cell Cases to Ambient), typical 1.1°C/W Thermal Capacitance (Cth), typical 4,800 J/°C 2 ESR AND CAPACITANCE VS TEMPERATURE 180% Capacitance DC ESR Percentage change from value at 25°C 170% 160% 150% 140% 130% 120% 110% 100% 90% 80% -60 -40 -20 0 20 40 60 80 Temperature (°C) NOTES 1. Capacitance and ESR DC measured at 25 °C per Document Number 1007239 available at www.maxwell.com 2. Per Maxwell Document 1007239 available at www.maxwell.com. ½ CV C x ESR DC + 1 4. After 72 hours at 25 °C and rated voltage. Initial leakage current can be higher. 3. Maximum Peak current (1 sec) = 5. Per IEC 62391-2, Pd = 0.12V2 ESR DC x Mass 6. Pmax = V2 4 x ESR DC x Mass 7. Emax = ½ CV2 3,600 x Mass 11. A bsolute maximum voltage non repeated, not to exceed 1 second. 13. Duration = 60 seconds. Not intended as an operating parameter. Please refer to the user manual for installation recommendations. Document number: 3000246 .1 10. N o more than 10% decrease in capacitance from minimum initial capacitance or 50% increase in ESR from maximum initial ESR. 12. For a given application, sufficient cooling must be provided to keep cell case temperatures below 65°C. See R ca. MOUNTING RECOMMENDATIONS Page 3 ½ CV2 3,600 9. Cycle per Document Number 1007239 available at www.maxwell.com. 8. E stored = maxwell.com MARKINGS Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, warning marking, serial number. DATASHEET 160V MODULE BMOD0006 E160 B02 37 7 7 37 12 DETAIL B SCALE 2 : 5 79 DETAIL A SCALE 2 : 5 MONITORING 14 A 8 C B 70.6 103.9 235 DETAIL C SCALE 2 : 5 58.3 66.6 66.6 6 44.2 103.9 MONITORING 367 Part Description BMOD0006 E160 B02 L (±0.5mm) Dimensions (mm) W (±0.2mm) H (±0.7mm) Package Quantity 367 235 79 3 Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by U.S. patents and their respective foreign counterparts. Patent information can be found at www.maxwell.com. Maxwell Technologies, Inc. Global Headquarters 5271 Viewridge Court, Suite 100 San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 Maxwell Technologies SA Route de Montena 65 CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Leopoldstrasse 244 80807 München Germany Tel: +49 (0)89 / 20 80 39 653 Fax: +49 (0)89 / 20 80 39 651 MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission from Maxwell Technologies, Inc. All contents copyright © 2012 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc. Page 4 Document number: 3000246 .1 maxwell.com Maxwell Technologies, Inc. Shanghai Representative Office Unit A2BC, 12th Floor Huarun Times Square 500 Zhangyang Road, Pudong Shanghai 200122, P.R. China Tel: +86 21 3852 4000 Fax: +86 21 3852 4099