1005/1013/8898 M PR E CI NE D ON S I CHI A PIN RECEPTACLES for .015” - .025” diameter pins PINS 0145/0146 Basic Part Number Basic Part Number Length A 1005-0 1013-0 8898-0 0145-0 0146-0 .138 .165 .224 Length A .300 .410 NOTE: 8898 is not annealed & not suitable for auto-clinching XXXX-0-15-XX-3X-XX-04-0 014X-0-15-XX-30-XX-04-0 Press-fit in .057 mounting hole 1/4 hard brass shell for auto-clinching Press-fit in .059 mounting hole 4378 0556 1103 9234 4378-0-15-XX-30-XX-10-0 0556-0-15-XX-30-XX-04-0 1103-0-15-XX-30-XX-04-0 9234-0-15-XX-30-XX-10-0 Press-fit in .057 mounting hole Press-fit in .059 mounting hole Press-fit in .057 mounting hole Solder mount in .052 min. mounting hole 0136/37/38/39/41/48/52 0447 5660 01XX-0-15-XX-30-XX-04-0 0447-0-15-XX-30-XX-04-0 5660-0-15-XX-30-XX-10-0 Press-fit in .057 mounting hole Press-fit in .056 mounting hole Solder mount in .051 min. mounting hole Basic Part Number 0136-0 0137-0 0138-0 0139-0 0141-0 0148-0 0152-0 SPECIFICATIONS SHELL MATERIAL: Brass Alloy 360, 1/2 Hard CONTACT MATERIAL: Beryllium Copper Alloy 172, HT DIMENSION IN INCHES TOLERANCES ON: LENGTHS: ±.005 DIAMETERS: ±.002 ANGLES: ± 2° w w w. m i l l - m a x . c o m Length A 1.215 .560 .210 .635 .700 .455 .410 ORDER CODE: XXXX - X - 15 - XX - XX - XX - XX - 0 BASIC PART # SPECIFY SHELL FINISH: 01 200μ” TIN/LEAD OVER NICKEL 80 200μ” TIN OVER NICKEL (RoHS) 15 10μ” GOLD OVER NICKEL (RoHS) RoHS 2002/95/EC SPECIFY CONTACT FINISH: 02 100μ” TIN/LEAD OVER NICKEL 84 100μ” TIN OVER NICKEL (RoHS) 27 30μ” GOLD OVER NICKEL (RoHS) SELECT CONTACT #30 or #32 CONTACT (DATA ON PAGE 219) 137 516-922-6000