0291 0293 M PR E CI 0287 NE D ON S I CHI A PIN RECEPTACLES for .022” - .034” diameter pins and .025” square pins PINS 0285 0287-0-15-XX-16-XX-10-0 0291-0-15-XX-16-XX-10-0 0293-0-15-XX-16-XX-10-0 Hex press-fit in .067 plated thru hole Press-fit in.067 mounting hole 0284 8114 Solder mount in .065 min. mounting hole Also available on 8mm wide carrier tape: 3,250 parts per 13” reel. Order as: 0287-0-57-XX-16-XX-10-0 0407 0285-0-15-XX-16-XX-10-0 Solder mount in .065 min. mounting hole 0415 0415-0-15-XX-16-XX-10-0 0284-0-15-XX-16-XX-10-0 8114-0-15-XX-16-XX-04-0 0407-0-15-XX-16-XX-04-0 Solder mount in .070 min. mounting hole Press-fit from underside of pc board into .065 mounting hole Press-fit in .066 mounting hole 0303 0303-0-19-XX-16-XX-10-0 Press-fit in .067 mounting hole Wire Crimp Termination. Accepts wire sizes 26 AWG Max. / 30 AWG Min. SPECIFICATIONS SHELL MATERIAL: Brass Alloy 360, 1/2 Hard CONTACT MATERIAL: Beryllium Copper Alloy 172, HT DIMENSION IN INCHES TOLERANCES ON: LENGTHS: ±.005 DIAMETERS: ±.002 ANGLES: ± 2° w w w. m i l l - m a x . c o m Solder mount in .063 min. mounting hole Also available on 24mm wide carrier tape: 1,500 parts per 13” reel. Order as: 0415-0-57-XX-16-XX-10-0 0306 0273 7520 0306-0-19-XX-16-XX-10-0 0273-0-15-XX-16-XX-10-0 7520-0-15-XX-16-XX-10-0 Wire Crimp Termination. Accepts wire sizes 20 AWG Max. / 24 AWG Min. Press-fit in .078 mounting hole Press-fit in .066 mounting hole ORDER CODE: XXXX - X - 1X - XX - 16 - XX - XX - 0 BASIC PART # SPECIFY SHELL FINISH: 01 200μ” TIN/LEAD OVER NICKEL 80 200μ” TIN OVER NICKEL (RoHS) 15 10μ” GOLD OVER NICKEL (RoHS) RoHS 2002/95/EC SPECIFY CONTACT FINISH: 01 200μ” TIN/LEAD OVER NICKEL 80 200μ” TIN OVER NICKEL (RoHS) 27 30μ” GOLD OVER NICKEL (RoHS) CONTACT #16 CONTACT (DATA ON PAGE 222) 146 516-922-6000