AN Series Crystal Micro Miniature Through Hole Crystal Frequency Range 12.000MHz to 40.000MHz RoHS Compliant ELECTRICAL CHARACTERISTICS Parameter Value Frequency Range Frequency Tolerance / Stability Operating Temperature Range Storage Temperature Range Aging at +25°C Shunt Capacitance Load Capacitance Equivalent Series Resistance (ESR) Mode of Operation Drive Level 12.000MHz to 40.000MHz (See Part Number Guide for Option) (See Part Number Guide for Option) -40°C to +85°C ±3 ppm / year max Less than 5pF (See Part Number Guide for Option) (See ESR Chart) (See ESR Chart) 1µW to 100µW ENVIRONMENTAL & MECHANICAL SPEC Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test MSL Reflow Conditions MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 EQUIVALENT SERIES RESISTANCE CHART MIL-STD-202, Method 215 Frequency Range 12.000MHz to 16.000MHz 16.000MHz to 30.000MHZ 30.000MHz to 40.000MHz MIL-STD-883, Method 2007, Cond A MIL-STD-883, Method 1014, Cond C MIL-STD-883, Method 1014, Cond A2 Level 1 per IPC/JEDEC J-STD 20 260°C max 10 sec per IPC/JEDEC J-STD 20 ESR 60Ω max 50Ω max 40Ω max Mode / Cut Fund / AT Fund / AT Fund / AT PART NUMBER GUIDE MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Page 1 of 2 Pb RoHS Free Revision: AN121113A Compliant AN Series Crystal 1. 2. 3. APPLICABLE STANDARDS / SPECIFICATIONS: ANSI Y14.5M, DIMENSIONS AND TOLERANCES. DIMENSIONS ARE MILLIMETERS [INCHES]. MILLIMETERS ARE THE CONTROLLING DIMENSIONS, INCHES ARE FOR REFERENCE ONLY. TOLERANCES ARE ±0.25 [.010] FOR TWO PLACE DECIMALS AND ±0.5 [.02] FOR ONE PLACE DECIMALS. DO NOT SCALE DRAWING Mechanical Dimensions Specifications subject to change without notice Page 2 of 2 Revision: AN121113A