OMRON E3XNA11V2M

Simple Fiber Amplifier
E3X-SD/-NA
The Highest Level of Power and Precision
in the Industry with “GIGA RAY”
Giga Power Lighting Element
• Stable detection of minute objects even when the
Sensor is covered with dust and oil in severe
environments.
• Quick-tuning to automatically adjust light
level and set threshold value.
• Use the one-key one-function feature for quick,
easy operation.
• Reasonable price.
Ordering Information
Amplifier Units [Refer to Dimensions on page 13.]
Digital Display and Direct Key Setting
Item
Connection
method
Appearance
Ratings and
Specifications
Pre-wired (2 m)
Standard models
Model
NPN output
PNP output
E3X-SD21 2M
E3X-SD51 2M
E3X-SD7
E3X-SD9
--Wire-saving
connector *
*An Amplifier Unit Connector (sold separately) is required.
Bar Display and Adjuster Setting
Item
Appearance
Connection
method
Ratings and
Specifications
Pre-wired (2 m)
Standard models
PNP output
E3X-NA11 2M
E3X-NA41 2M
E3X-NA6
E3X-NA8
E3X-NA11F 2M
E3X-NA41F 2M
E3X-NA11V 2M
E3X-NA41V 2M
E3X-NA14V
E3X-NA44V
--Wire-saving
connector *1
High-speed
detection models
Model
NPN output
Pre-wired (2 m)
Response time: 20 μs
Pre-wired (2 m)
Water-resistant
models
Degree of protection:
IP66
Connector (M8) *2
*1. An Amplifier Unit Connector (sold separately) is required.
*2. A Sensor I/O Connector (sold separately) is required.
1
E3X-SD/-NA
Amplifier Unit Connectors (sold separately)
Item
Appearance
Note: Protective seals provided. [Refer to Dimensions on page 17.]
Cable length
No. of conductors
Model
3
E3X-CN11
1
E3X-CN12
Master Connector
2m
Slave Connector
Ordering Precautions for Amplifier Units
Connectors
A Connector is not provided with the Amplifier Unit.
Refer to the tables at the right when placing an order.
Amplifier Units
Applicable Connectors (sold separately)
Type
NPN
PNP
Standard
models
E3X-SD7
E3X-SD9
E3X-NA6
E3X-NA8
+
Master Connector
Slave Connector
E3X-CN11 (3-wire)
E3X-CN12 (1-wire)
When Using 5 Amplifier Units
5 Amplifier Units
+
1 Master Connector + 4 Slave Connectors
Sensor I/O Connectors (Models for Connectors: A Connector is not provided with the Amplifier Unit. Be sure to order a Connector separately.)
[Refer to Dimensions on XS3.]
Size
Cable specifications
M8
Appearance
Cable type
Straight
connector
2m
L-shaped
connector
2m
5m
Standard cable
Model
XS3F-M421-402-A
Fourconductor
cable
5m
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Accessories (sold separately)
Mounting Brackets
End Plate
A Mounting Bracket is not provided with the Amplifier Unit. Order a
Mounting Bracket separately if required.
[Refer to Dimensions on page 17.]
End Plates are not provided with the Amplifier
Unit. Order End Plates separately if required.
[Refer to Dimensions on page 17.]
Appearance
2
Applicable models
Model
[email protected]
[email protected]
[email protected]
E39-L143
[email protected]
E39-L148
Quantity
1
Appearance
Model
Quantity
PFP-M
1
E3X-SD/-NA
Ratings and Specifications
Amplifier Units
Digital display and direct key setting
Type
Bar display and adjuster setting
Standard models
Standard models
High-speed detection
models
Water-resistant models
[email protected]
[email protected]
[email protected]
[email protected]
Model
Item
Light source (wavelength) Red, 4-element LED (625 nm)
Red LED (680 nm)
Power supply voltage
12 to 24 VDC ±10%, ripple (p-p): 10% max.
Power consumption/
Current consumption
960 mW max.
(Power supply voltage: 24 V,
Current consumption: 40 mA max.)
(Power supply voltage: 12 V,
Current consumption: 80 mA max.)
960 mW max. (Current consumption: 40 mA max.)
Control output
Open-collector output (NPN or PNP)
Load power supply: 26.4 V max.,
Load current: 50 mA max.
(Residual voltage: 1.5 V max.)
Light-ON/Dark-ON mode selector
Open-collector output (NPN or PNP)
Load power supply: 26.4 V max.,
Load current: 50 mA max.
(Residual voltage: 1 V max.)
Light-ON/Dark-ON mode selector.
Response time
Operate or reset: 200 μs max. (✽1)
Sensitivity adjustment
UP/DOWN direct key setting, teaching
with/without a workpiece, automatic teaching
8-turn sensitivity adjuster (with indicator)
Protection circuits
Power supply reverse polarity protection,
output short-circuit protection,
output reverse polarity protection
Power supply reverse polarity protection,
output short-circuit protection
Timer function
---
Operate: 20 μs max.
Reset: 30 μs max.
Operate or reset:
200 μs max. (✽1)
No timer, OFF-delay timer; or Timer selector (timer time: 40 ms (fixed))
Mutual interference
prevention
Up to 5 Amplifiers (optically synchronized) (✽2)
Up to 5 Amplifiers (optically synchronized) (✽2)
Ambient illumination
Receiver side
Incandescent lamp: 10,000 lux max.
Sunlight: 20,000 lux max.
Number of gang-mounted
Amplifiers
16 max. (The ambient temperature specification depends on the number of gang-mounted Amplifiers.)
Ambient temperature
range
Operating: Groups of 1 to 3 Amplifiers:
−25°C to 55°C
Groups of 4 to 11 Amplifiers:
−25°C to 50°C
Groups of 12 to 16 Amplifiers: −25°C to 45°C
Storage: −30°C to 70°C (with no icing or condensation)
Ambient humidity range
Operating and storage: 35% to 85% (with no condensation)
Insulation resistance
20 MΩ. min. (at 500 VDC)
Dielectric strength
1,000 VAC at 50/60 Hz for 1 minute (✽3)
Vibration resistance
Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance
Destruction: 500 m/s2, for 3 times each in X, Y and Z directions
Degree of protection
IEC 60529 IP50 (with Protective Cover attached)
Connection method
Pre-wired (standard cable length: 2 m), or connector
None
IEC 60529 IP66
(with Protective Cover attached)
Weight (packed state) (✽4) Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g
Material
Case
Polybutylene terephthalate (PBT)
Cover
Polycarbonate (PC)
Accessories
Polyethersulfone (PES)
Instruction manual
✽1. When there are 8 or more E3X-NA Amplifiers mounted side-by-side, the response time will be 350 μs max.
✽2. Mutual interference prevention is effective when E3X-SD/-NA-series Amplifiers are gang-mounted without other E3X-series Amplifiers.
✽3. Water-resistant models and models with connectors have a dielectric strength of 500 VAC.
✽4. Add 10 g for water-resistant models.
Amplifier Unit Connectors (Wire-saving Connectors)
Item
Model
E3X-CN11
E3X-CN12
Rated current
2.5 A
Rated voltage
50 V
Contact resistance
20 mΩ max. (20 mVDC max., 100 mA max.)
(The above figure is for connection to the Amplifier Unit and the adjacent Connector. It does not include the conductor resistance of the
cable.)
Number of insertions
Material
Destruction: 50 times (for connection to the Amplifier Unit and the adjacent Connector)
Housing
Polybutylene terephthalate (PBT)
Contact
Phosphor bronze/gold-plated nickel
Weight (packed state)
Approx. 55 g
Approx. 25 g
3
E3X-SD/-NA
Sensing distance
Amplifier Unit
Fiber Unit
Screw-shaped model
Sensing
Size
method
M3
Throughbeam
models
M4
Sensing
direction
Straight
Right angle
Straight
Right angle
M3
Straight
M4
Reflective
models
Right angle
M6
Straight
Model
E32-T21R 2M
E32-T11N 2M
E32-T11R 2M
E32-TC200 2M
E32-T11L 2M
E32-C31N 2M
E32-D21R 2M
E32-C31 2M
E32-D211R 2M
E32-D11N 2M
E32-C11N 2M
E32-D11R 2M
E32-DC200 2M
E32-CC200 2M
E32-D11L 2M
Amplifier Unit
Fiber Unit
Flat model
Sensing
method
Sensing
direction
Top view
Throughbeam
models
Side view
Flat view
Top view
Reflective
models
Side view
Flat view
Size
Standard
Small
Standard
Small
Standard
Small
Standard
Small
Standard
Small
Standard
Small
Model
E32-T15XR
E32-T25XR
E32-T15YR
E32-T25YR
E32-T15ZR
E32-T25ZR
E32-D15XR
E32-D25XR
E32-D15YR
E32-D25YR
E32-D15ZR
E32-D25ZR
2M
2M
2M
2M
2M
2M
2M
2M
2M
2M
2M
2M
Amplifier Unit
Fiber Unit
Cylindrical model
Sensing
Sensing
method
direction
Throughbeam
models
Reflective
models
Top view
Side view
Top view
Size
φ1
φ3
φ1
φ3
φ1.5
φ2
φ3
Side view
φ2
φ6
Model
E32-T223R 2M
E32-T12R 2M
E32-T24R 2M
E32-T14LR 2M
E32-D22B 2M
E32-D32 2M
E32-D22R 2M
E32-D32L 2M
E32-D24R 2M
E32-D14LR 2M
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
120
530
560
800
1,400
25
30
80
30
170
170
180
300
300
400
High-speed
detection models
36
160
160
240
420
7.5
10
26
10
50
50
60
100
100
130
Water-resistance
models
60
280
280
400
700
13
15
40
15
90
85
90
150
150
200
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
560
120
220
60
220
60
180
30
40
8
40
8
High-speed
detection models
160
36
66
18
66
18
60
10
10
2.4
10
2.4
Water-resistance
models
280
60
110
30
110
30
90
15
20
4
20
4
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
120
560
60
220
30
80
30
160
14
32
High-speed
detection models
36
160
18
66
10
26
10
50
4.6
10
Water-resistance
models
60
280
30
110
15
40
15
80
7
16
For information on Fiber Units, refer to the Fiber Sensors Best Selection Catalog (Cat. No. E353).
4
E3X-SD/-NA
Amplifier Unit
Fiber Unit
Model equipped with sleeve
Sensing
Sleeve size
Mounting size
method
φ0.25 × 5
φ3
Throughφ0.5 × 40
beam
φ0.9 × 40
M3
models
φ1.2 × 90
M4
φ0.5 × 15
φ2
φ0.8 × 15
φ3
Reflective
models
φ1.2 × 40
M3
φ2.5 × 90
M6
Model
E32-T333-S5 1M
E32-T33 1M
E32-TC200F4R 2M
E32-TC200BR 2M
E32-D331 2M
E32-D33 2M
E32-DC200F4R 2M
E32-DC200BR 2M
Amplifier Unit
Fiber Unit
Movable section (Flexibility)
Sensing
Shape
method
Screw-shaped
model
Throughbeam
models
Cylindrical
model
Flat model
Screw-shaped
model
Reflective
models
Cylindrical
model
Flat model
Size
M3
M4
φ1.5
φ3
Standard
Small
M3
M4
M6
φ1.5
φ3
Standard
Small
Model
E32-T21 2M
E32-T11 2M
E32-T22B 2M
E32-T12B 2M
E32-T15XB 2M
E32-T25XB 2M
E32-D21 2M
E32-D21B 2M
E32-D11 2M
E32-D22B 2M
E32-D221B 2M
E32-D15XB 2M
E32-D25XB 2M
Amplifier Unit
Fiber Unit
Heat-resistance model
Sensing
Operating
method temperature
100°C
Throughbeam
models
150°C
--Lens
High-power lens
--Lens
High-power lens
---
200°C
350°C
Reflective
models
Lens
100°C
150°C
200°C
350°C
400°C
Lens
--High-power lens
---
Model
E32-T51R 2M
E32-T51R 2M + E39-F1
E32-T51R 2M + E39-F16
E32-T51 2M
E32-T51 2M + E39-F1-33
E32-T51 2M + E39-F16
E32-T54 2M
E32-T81R-S 2M
E32-T61-S 2M + E39-F1
E32-T61-S 2M
E32-T61-S 2M + E39-F16
E32-D51R 2M
E32-D51 2M
E32-D81R 2M
E32-D61 2M
E32-D73 2M
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
10
40
120
560
3
16
30
180
High-speed
detection models
3
13.5
36
160
1
4
10
60
Water-resistance
models
5
20
60
280
1.5
10
15
90
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
200
720
200
720
720
150
30
70
180
30
70
180
50
High-speed
detection models
60
200
60
200
200
40
10
20
60
10
20
60
16
Water-resistance
models
100
360
100
360
360
75
15
35
90
15
35
90
25
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
400
2,000
4,000 ✽
800
2,400
4,000 ✽
260
360
4,000 ✽
600
4,000 ✽
140
240
90
90
60
High-speed
detection models
120
720
1,560
240
720
3,120
70
100
1,800
180
2,340
42
80
27
27
18
Water-resistance
models
225
1,650
2,900
400
1,400
4,000 ✽
130
180
3,000
300
3,900
70
120
45
45
30
✽ The fiber length is 2 m on each side, so the sensing distance is given as 4,000 mm.
For information on Fiber Units, refer to the Fiber Sensors Best Selection Catalog (Cat. No. E353).
5
E3X-SD/-NA
Amplifier Unit
Fiber Unit
Chemical-resistance / Oil-resistance model
Sensing
Type
Model
method
φ5
E32-T12F 2M
φ7.2
E32-T11F 2M
φ5
E32-T51F 2M
Heat-resistance
Throughφ5
E32-T14F 2M
beam
Side view
models
M4
E32-T11U 2M
Chemical-resistance cable
M4
Right angle
E32-T11NU 2M
Chemical-resistance cable
φ6
E32-D12F 2M
φ7
Reflective
E32-D14F 2M
Side view
models
M6
E32-D11U 2M
Chemical-resistance cable
Amplifier Unit
Fiber Unit
Vacuum-resistance model
Operating
Sensing
ambient
method
temperature
Throughbeam
models
120°C
200°C
Sensing
direction
Top view
Right angle
Model
E32-T51V 1M
E32-T51V 1M + E39-F1V
E32-T54V 1M
E32-T84SV 1M
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
3,200
2,100
High-speed
detection models
960
760
Water-resistance
models
1,600
1,050
1,400
400
700
400
120
200
720
200
360
400
120
210
100
32
50
40
13
20
180
60
90
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
High-speed
detection models
Water-resistance
models
200
1,200
130
500
---------
100
600
65
250
For information on Fiber Units, refer to the Fiber Sensors Best Selection Catalog (Cat. No. E353).
6
E3X-SD/-NA
Amplifier Unit
Fiber Unit
Long distance/Dust resistance (High-power), Detection through gaps
(Narrow vision field)
Sensing
Sensing
direction/
Type
Model
method
Lens type
Top view
E32-T17L 10M
High-power
(integrated unit)
Side view
E32-T14 2M
High-power
E32-T11N 2M + E39-F1
Ultrahigh-power E32-T11N 2M + E39-F16
High-power
E32-T11R 2M + E39-F1
Ultrahigh-power E32-T11R 2M + E39-F16
Side view
E32-T11R 2M + E39-F2
High-power
E32-TC200 2M + E39-F1
Ultrahigh-power E32-TC200 2M + E39-F16
Side view
E32-TC200 2M + E39-F2
High-power
E32-T11 2M + E39-F1
Ultrahigh-power E32-T11 2M + E39-F16
ThroughSide view
E32-T11 2M + E39-F2
High-power
beam
(with lens unit)
High-power
E32-T11U 2M + E39-F1
models
Ultrahigh-power E32-T11U 2M + E39-F16
Side view
E32-T11U 2M + E39-F2
High-power
E32-T11NU 2M + E39-F1
Ultrahigh-power E32-T11NU 2M + E39-F16
High-power
E32-T81R-S 2M + E39-F1
Ultrahigh-power E32-T81R-S 2M + E39-F16
Side view
E32-T81R-S 2M + E39-F2
High-power
E32-T61-S 2M + E39-F1
Ultrahigh-power E32-T61-S 2M + E39-F16
Side view
E32-T61-S 2M + E39-F2
Narrow vision
Top view
E32-T22S 2M
field (aperture
Side view
E32-T24S 2M
angle: 4°)
Reflective
High-power
Top view
E32-D16 2M
models
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
High-speed
detection models
Water-resistance
models
20,000 ✽1
3,600
3,700
4,000 ✽2
4,000 ✽2
4,000 ✽2
440
4,000 ✽2
4,000 ✽2
700
4,000 ✽2
4,000 ✽2
720
3,600
4,000 ✽2
660
1,800
4,000 ✽2
1,800
4,000 ✽2
280
4,000 ✽2
4,000 ✽2
780
2,000
8,400
1,080
1,110
2,000
1,260
2,000
130
1,800
3,000
210
1,200
2,600
200
1,080
2,600
198
700
1,500
630
1,300
84
1,800
2,340
260
600
1,400
420
800
140
14,000
1,800
2,100
3,600
2,100
3,600
220
3,000
4,000 ✽2
350
2,000
4,000 ✽2
360
2,000
4,000 ✽2
330
1,500
2,700
1,100
2,300
140
3,000
3,900
390
1,000
700
40 to 400
✽1. The fiber length is 10 m on each side, so the sensing distance is given as 20,000 mm.
✽2. The fiber length is 2 m on each side, so the sensing distance is given as 4,000 mm.
Amplifier Unit
Fiber Unit
Minute object detection (Small-spot model)
Sensing Spot diameter Focal length
Model
method
(mm)
(mm)
φ0.1 to 0.6
6 to 15
E32-C42 1M + E39-F3A
(Variable)
5
E32-C42S 1M
φ0.1
7
E32-C41 1M + E39-F3A-5
φ0.2
17
E32-C41 1M + E39-F3B
7
E32-C31 2M + E39-F3A-5
Reflective
φ0.5
models
17
E32-C31 2M + E39-F3B
φ6
50
E32-L15 2M
φ4
0 to 20
E32-C31 2M + E39-F3C
Parallel light
E32-C11N 2M + E39-F18
φ3
50
E32-CC200 2M + E39-F18
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
High-speed
detection models
Water-resistance
models
Spot diameter of 0.1 to 0.6 mm at 6 to 15 mm
Spot diameter of 0.1 mm at 5 mm
Spot diameter of 0.1 mm at 7 mm
Spot diameter of 0.2 mm at 17 mm
Spot diameter of 0.5 mm at 7 mm
Spot diameter of 0.5 mm at 17 mm
Spot diameter of 6 mm at 50 mm
Spot diameter of 4 mm max. at 0 to 20 mm
Spot diameter of 3 mm at 50 mm
Spot diameter of 3 mm at 50 mm
For information on Fiber Units, refer to the Fiber Sensors Best Selection Catalog (Cat. No. E353).
7
E3X-SD/-NA
Amplifier Unit
Fiber Unit
Area-sensing (Area beam)
Sensing
Area range
method
Throughbeam
models
Reflective
models
11 mm
Sensing
direction
Side view
Flat view
30 mm
11 mm
Side view
Model
E32-T16PR 2M
E32-T16JR 2M
E32-T16WR 2M
E32-D36P1 2M
Amplifier Unit
Fiber Unit
Detection without background interference (Convergent-reflective)
Sensing
Sensing
Size
Model
method
detection
Standard
E32-L16-N 2M
Flat view
Small
E32-L24S 2M
Reflective
models
Top view
E32-L25L 2M
--Flat view
E32-L24L 2M
Amplifier Unit
Fiber Unit
Detection of transparent objects (Retro-reflective)
Sensing
Type
Model
method
Square
E32-R16 5M + E39-R1 (Attached)
Small
E32-R21 2M + E39-R3 (Attached)
Retroreflective
E32-C31 2M
models
+ E39-F3R + E39-RP1
Film detection ✽2
✽1
E32-C31 2M
+ E39-F3R + E39-RSP1
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
800
700
1,380
High-speed
detection models
260
220
400
Water-resistance
models
450
390
690
50
75
150
Sensing distance (Unit: mm)
[email protected]
[email protected]
Standard
models
0 to 15
5.4 to 9
(Center 7.2)
[email protected]
[email protected]
High-speed
detection models
0 to 12
0 to 4
5.4 to 8
(Center 7.2)
2 to 6 (Center 4)
Water-resistance
models
0 to 15
5.4 to 9
(Center 7.2)
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
1,500
10 to 250
High-speed
detection models
1,000
250
Water-resistance
models
150 to 1,500
10 to 250
450
135
225
220
65
110
✽1. When using a highly reflective object, light reflected from the object may affect the Sensor.
✽2. Film detection may not be effective for some types of film. Confirm operation in advance.
For information on Fiber Units, refer to the Fiber Sensors Best Selection Catalog (Cat. No. E353).
8
E3X-SD/-NA
Amplifier Unit
Fiber Unit
FPD / Semiconductor / Solar battery industry
Sensing
Operating
Application
Model
method
temperature
E32-L16-N 2M
Glass
70°C
substrate
E32-A08 2M
alignment
300°C
E32-A08H2 3M
Glass detection
70°C
E32-L16-N 2M
70°C
E32-A09 2M
Glass
substrate
150°C
E32-A09H 2M
mapping
300°C
E32-A09H2 2M
Reflective
models
WET process
Throughbeam
models
Wafer
mapping
60°C
E32-L11FP 5M
70°C
E32-L12FS 5M
85°C
E32-L11FS 5M
70°C
E32-A03 2M
E32-A03-1 2M
E32-A04 2M
E32-A04-1 2M
Sensing distance (Unit: mm)
[email protected]
[email protected]
[email protected]
[email protected]
Standard
models
High-speed
Water-resistance
detection models
models
0 to 15
10 to 20
10 to 20
0 to 15
15 to 38 (Center 25)
15 to 38 (Center 25)
20 to 30 (Center 25)
8 to 20 mm from end of lens
(recommended: 11 mm)
19 to 31 mm from center point A of mounting hole
(recommended: 22 mm)
8 to 20 mm from end of lens
(recommended: 11 mm)
32 to 44 mm from center point A of mounting hole
(recommended: 35 mm)
8 to 20 mm from end of lens
(recommended: 11 mm)
32 to 44 mm from center point A of mounting hole
(recommended: 35 mm)
890
267
445
890
267
445
340
102
170
340
102
170
Amplifier Unit
Sensing distance (Unit: mm)
Fiber Unit
[email protected]
[email protected]
[email protected]
[email protected]
Liquid-level detection model
Sensing
Sensing
Standard
High-speed
Water-resistance
Pipe diameter
Model
method
direction
models
detection models
models
No limit
E32-D36T 5M
Applicable pipe: Transparent (no restriction on diameter)
Mounted to
Reflective
Applicable pipe: Transparent pipe with diameter of 8 to
pipe
φ8 to 10 mm E32-L25T 2M
models
10 mm, recommended pipe wall thickness: 1 mm
Wet
--E32-D82F1 4M
Wet model
For information on Fiber Units, refer to the Fiber Sensors Best Selection Catalog (Cat. No. E353).
9
E3X-SD/-NA
I/O Circuit Diagrams
Output
form
Output
transistor
operation mode
Model
Incident light
No incident light
Operation
ON
indicator
OFF
(orange)
ON
Output
transistor
OFF
Light-ON
E3X-SD21
E3X-SD7
NPN
Output
Operation
selector
Timing charts
Output circuit
Brown
LIGHT ON
(L-ON)
Load
Photoelectric
Sensor
main
circuit
Operate
Load
(relay)
1
Operation indicator
(orange)
T
✽
Control output
Reset
(Between brown and black leads)
E3X-NA11
E3X-NA6
E3X-NA11F
E3X-NA11V
E3X-NA14V
Incident light
No incident light
Operation
ON
indicator
OFF
(orange)
ON
Output
transistor
OFF
Dark-ON
Blue
T
• M8 Connector Pin Arrangement
DARK ON
(D-ON)
Light-ON
E3X-SD51
E3X-SD9
3
Brown
T
LIGHT ON
(L-ON)
Operation
indicator
(orange)
Operate
Reset
(Between blue and black leads)
Incident light
No incident light
T
Operation
ON
indicator
OFF
(orange)
ON
Output
transistor
OFF
Operate
Load
(relay)
Reset
(Between blue and black leads)
Dark-ON
4
✽ Not present on the E3X-NA.
Load
(relay)
E3X-NA41
E3X-NA8
E3X-NA41F
E3X-NA41V
E3X-NA44V
2
1
Note: Pin 2 is not used.
Operate
Reset
(Between brown and black leads)
Incident light
No incident light
Operation
ON
indicator
OFF
(orange)
ON
Output
transistor
OFF
1
Photoelectric
Sensor
main
circuit
✽
Black Control output
4
Load
Blue
• M8 Connector Pin Arrangement
DARK ON
(D-ON)
2
1
4
3
Note: Pin 2 is not used.
✽ Not present on the E3X-NA.
OFF delay
ON
OFF
ON
D-ON
OFF
T
L-ON
T
Plug (Sensor I/O Connector)
Terminal number
4
3
2
1
Brown
White
Blue
Black
XS3F-M421-402-A
XS3F-M421-405-A
10
Wire color
1
2
3
4
XS3F-M422-402-A
XS3F-M422-405-A
12 to
24 VDC
3
Note: Timing Charts for Timer Settings (T: Set Time)
Incident light
No incident light
12 to
24 VDC
3
Load
(relay)
PNP
Output
Black
4
Classification
DC
Note: Pin 2 is not used.
Wire color
Connection pin
Application
Brown
1
Power supply (+V)
White
2
---
Blue
3
Power supply (0 V)
Black
4
Output
E3X-SD/-NA
Safety Precautions
WARNING
This product is not designed or rated for
ensuring safety of persons either directly or
indirectly.
Do not use it for such purposes.
Caution
Do not exceed the rated voltage.
Excess voltage may result in malfunction or
fire.
Do not use an AC power supply.
Using an AC power supply may result in
rupturing.
High-temperature environments may result in
burn injury.
Precautions for Safe Use
The following precautions must be observed to ensure safety.
1. Do not use the product in locations where flammable or
explosive gas is present.
2. Do not use the product in locations subject to splashing
water, oil, or chemicals, or in locations subject to steam.
3. Do not attempt to disassemble, repair, or modify the
product.
4. Do not apply voltage or current in excess of the rated
ranges.
5. Do not use the product in atmospheres or environments
that exceed product ratings.
6. Do not wire the product incorrectly, such as using incorrect
power supply polarity.
7. Connect the load properly.
8. Do not short-circuit both ends of the load.
9. Do not use the product if the case is damaged.
10. When disposing of the product, dispose of it as industrial
waste.
11. Do not use the product in locations subject to direct
sunlight.
12. The surface temperature of the product may rise as a
result of the ambient temperature, power supply, or other
usage conditions. Use caution when performing
maintenance and washing. Failure to do so may result in
burn injury.
Precautions for Correct Use
Do not use the product in atmospheres or environments that
exceed product ratings.
Amplifier Units
● Designing
Communications Hole
The hole on the side of the Amplifier Unit is a communications
hole for preventing mutual interference when Amplifier Units
are mounted side-by-side. The E3X-MC11 Mobile Console
(sold separately) cannot be used.
If an excessive amount of light is received via the Sensor, the
mutual interference prevention function may not work. In this
case, make the appropriate adjustments using the sensitivity
adjuster.
Mutual interference prevention is effective when E3X-SD/NA-series Amplifiers are gang-mounted without other E3Xseries Amplifiers.
● Mounting
DIN Track Mounting/Removal
Mounting Amplifier Units
1. Mount the Amplifier Units one at a time onto the DIN track.
2. Slide the Amplifier Units together, line up the clips, and
press the Amplifier Units together until they click into place.
Clip
Click into
place
Removing Amplifier Units
Slide Amplifier Units away from each other, and remove from
the DIN track one at a time. (Do not attempt to remove
Amplifier Units from the DIN track without separating them
first.)
Note 1. The specifications for ambient temperature will vary according to the
number of Amplifier Units used together. For details, refer to Ratings
and Specifications.
2. Always turn OFF the power supply before mounting or removing
Amplifier Units.
11
E3X-SD/-NA
Fiber Connection and Disconnection
The E3X Amplifier Unit has a lock lever. Connect or
disconnect the fibers to or from the E3X Amplifier Unit using
the following procedures:
1. Connection
Open the Protective Cover, insert the fibers according to the
fiber insertion marks on the side of the Amplifier Unit, and
lower the lock lever.
Insertion position
Lock lever
Fiber
Fiber insertion mark
10.7 mm
Sticker
Removing Connectors
1. Slide the slave Amplifier Unit for which the Connector is to
be removed away from the rest of the group.
2. After the Amplifier Unit has been separated, press down on
the lever on the Connector and remove it. (Do not attempt
to remove Connectors without separating them from other
Amplifier Units first.)
Press down
Lever
Note: If one of the fibers from the Fiber Unit has a white line, such as with a Coaxial
Sensor, that fiber is for the Emitter. Insert it into the Emitter section. Refer to
Dimensions for the Fiber Unit to see if there is an Emitter fiber.
2. Disconnection
Remove the Protective Cover and raise the lock lever to pull out the fiber.
Protective Cover
Locked
Unlocked
Note:To maintain the fiber properties, confirm that the lock is
released before removing the fiber.
3. Precautions for Fiber Connection/Disconnection
Be sure to lock or unlock the lock lever within an ambient
temperature range between −10°C and 40°C.
● Operating Environment
Ambient Conditions
If dust or dirt adhere to the hole for optical communications, it
may prevent normal communications. Be sure to remove any
dust or dirt before using the Units.
Sticker
Note: Attach the stickers to the sides with grooves.
Remove
Mounting End Plate (PFP-M)
Depending on how it is mounted, an Amplifier Unit may move
during operation. In this case, use an End Plate.
Before mounting an End Plate, remove the clip from the
master Amplifier Unit using a nipper or similar tool.
Clip
The clip can also be removed using the following mechanism,
which is incorporated in the construction of the section
underneath the clip.
1. Insert the clip to be removed into the slit underneath the clip
on another Amplifier Unit.
● Other
Protective Cover
Be sure to mount the Protective Cover before use.
Amplifier Units with Connectors
● Mounting
Mounting Connectors
1. Insert the Master or Slave Connector into the Amplifier Unit
until it clicks into place.
2. Remove the clip by rotating the Amplifier Unit.
Rotate
Insert
2. Join Amplifier Units together as required after all the Master
and Slave Connectors have been inserted.
3. Attach the stickers (provided as accessories) to the sides of
Master and Slave Connectors that are not connected to
other Connectors.
12
Pull Strengths for Connectors (Including Cables)
E3X-CN11: 30 N max.
E3X-CN12: 12 N max.
E3X-SD/-NA
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this sheet unless otherwise specified.
Amplifier Units
Amplifier Units with Cables
E3X-SD21
10
E3X-SD51
E3X-NA11
E3X-NA11F
E3X-NA41
E3X-NA41F
15
Vinyl-insulated round cable
4 dia. cable / 3 conductors / Standard length: 2 m
(Conductor cross section: 0.2 mm2,
Insulator diameter: 1.1 mm)
Operation indicator
DIN track mounting
3
128.95
180°
93.75
Hole for optical communications ✽
31.5
8
(9)
10.7
10.75
Two,
2.4 dia.
3.4
2.4
13
Multiple connection diagram
4
30.4
End Plate
(sold separately)
PFP-M
12.4
L
64.3
Center of DIN track
DIN track
(sold separately)
[email protected]
10
Fiber Attachment mounted (E39-F9)
10
The number of
expansion
L (mm)
1
10
2
20
3
30
4
40
5
50
6
60
7
70
8
80
10
9
90
10
100
With Mounting Bracket Attached
3
128.95
180°
93.75
Hole for optical communications ✽
31.5
8
(9)
10.7
10.75
Two,
2.4 dia.
3.4
2.4
Two, 3.2 dia. holes
4.3
13
(9.4)
4
16
64.3
Mounting Bracket (E39-L143)
SUS304 stainless steel (sold separately)
Mounting Holes
Two, M3
3.4
4.4
16
22.4
16
✽ There is no hole for [email protected] models.
Fiber Attachment mounted (E39-F9)
Note: When using E39-L143 Mounting Brackets, there will be small gaps between the Amplifier Units if they are mounted side by side.
13
E3X-SD/-NA
Amplifier Units with Connectors
E3X-SD7
10
E3X-SD9
E3X-NA6
E3X-NA8
15
Operation indicator
DIN track mounting
3
128.95
180°
93.75
31.5
8
Hole for optical communications
A dia. ✽
(9)
12.95
10.7
Two,
2.4 dia.
3.4
Multiple connection diagram
13
30.4
End Plate
(sold separately)
PFP-M
12.4
L
64.3
Center of DIN track
DIN track
(sold separately)
[email protected]
10
Fiber Attachment mounted (E39-F9)
10
The number of
expansion
L (mm)
1
10
2
20
3
30
4
40
5
50
6
60
7
70
8
80
10
9
90
10
100
With Mounting Bracket Attached
3
128.95
180°
93.75
31.5
8
Hole for optical communications
A dia. ✽
(9)
12.95
10.7
Two,
2.4 dia.
3.4
Two, 3.2 dia. holes
4.3
13
(9.4)
16
64.3
Mounting Bracket (E39-L143)
SUS304 stainless steel (sold separately)
Mounting Holes
Two, M3
3.4
4.4
✽ Cable Diameters
16
22.4
E3X-CN11 (3 conductors)
4.0 dia.
E3X-CN12 (1 conductor)
2.6 dia.
16
Fiber Attachment mounted (E39-F9)
Note: When using E39-L143 Mounting Brackets, there will be small gaps between the Amplifier Units if they are mounted side by side.
14
E3X-SD/-NA
Amplifier Units with Cables,
Water-resistant Models
E3X-NA11V
12
E3X-NA41V
Area of digital indication
28.65
25.95
9.2
Vinyl-insulated round cable
Operation indicator
4 dia. cable / 3 conductors / Standard length: 2 m
(Conductor cross section: 0.45 mm2,
Insulator diameter: 1.1 mm)
Incident level indicators
DIN track mounting
6.9
152.3
105.9
180°
33
(9)
8
11.2
10.7
Two,
2.4 dia.
3.4
Hole for optical communications
14.4
31.9
18
Multiple connection diagram
67.2
End Plate
(sold separately)
PFP-M
L
Center of DIN track
DIN track
(sold separately)
[email protected]
10
Fiber Attachment mounted (E39-F9)
12
10
The number of
expansion
L (mm)
1
12
2
24
3
36
4
48
5
60
6
72
7
84
8
96
9
108
10
120
With Mounting Bracket Attached
6.9
152.3
105.9
180°
33
(9)
8
11.2
10.7
Two,
2.4 dia.
3.4
Hole for optical communications
4.3
14.4
9.5
16
67.2
6.6
Mounting Bracket (E39-L148)
SUS304 stainless steel (sold separately)
Mounting Holes
Two, M3
3.4
5.4
16
23.9
16
Fiber Attachment mounted (E39-F9)
15
E3X-SD/-NA
Amplifier Units with Connectors,
Water-resistant Models
E3X-NA14V
E3X-NA44V
12
Area of digital indication
28.65
25.95
9.2
Operation indicator
Incident level indicators
DIN track mounting
6.9
152.3
105.9
180°
33
(9)
8
11.2
10.7
Two,
2.4 dia.
3.4
Hole for optical communications
14.4
31.9
18
Multiple connection diagram
67.2
End Plate
(sold separately)
PFP-M
L
Center of DIN track
DIN track
(sold separately)
[email protected]
10
Fiber Attachment mounted (E39-F9)
12
10
The number of
expansion
L (mm)
1
12
2
24
3
36
4
48
5
60
6
72
7
84
8
96
9
108
10
120
With Mounting Bracket Attached
6.9
152.3
105.9
180°
33
(9)
8
11.2
10.7
Two,
2.4 dia.
3.4
Hole for optical communications
4.3
14.4
9.5
16
67.2
Mounting Holes
Two, M3
3.4
5.4
16
23.9
16
Fiber Attachment mounted (E39-F9)
16
11
Mounting Bracket (E39-L148)
SUS304 stainless steel (sold separately)
E3X-SD/-NA
Amplifier Unit Connectors (Wire-saving Connectors)
Master Connector
E3X-CN11
2,000 +500
Edge of amplifier
(7)
✽
✽ E3X-CN11: 4 dia. cable / 3 conductors / Standard length: 2 m (Conductor cross section: 0.2 mm2 (AWG24), Insulator diameter: 1.1 mm)
Slave Connector
E3X-CN12
2,000 +500
Edge of amplifier
(7)
✽
✽ E3X-CN12: 2.6 dia. cable / 1 conductor / Standard length: 2 m (Conductor cross section: 0.2 mm2 (AWG24), Insulator diameter: 1.1 mm)
Accessories (sold separately)
Mounting Brackets
E39-L143
34.8
22
16
2.5
(10.3)
3
Mounting Holes
Two, M3
7.3
5.3
26.8
Two, 3.2 dia.
3
16
7
16±0.1
3
Four, R1.7
3.4
10.3 10 max. 7
Material: Stainless steel
(SUS304)
1
3.4
End Plates
PFP-M
11.5
1
50
M4 × 8
panhead screw
10
M4 spring washer
4.8
6.2
10
1
1.3
1.8
35.5
1.8
35.3
17
E3X-SD/-NA
Nomenclature
Amplifier Units
E3X-SD
E3X-NA
Digital incident light level display or
digital threshold value display (red)
Digital threshold value adjustment
Display of contents of functions
(UP/DOWN)
during operation
Operation Selector
Teaching status
Use to switch between
indication(orange)
Light-ON and Dark-ON
Operation Indicator Light-ON and
(Orange)
Dark-ON Indicator
Lock Lever
Teaching Button
The sensitivity and threshold
value can be set automatically.
Sensitivity indicator
8-turn sensitivity adjuster
Lock lever
Incident level indicators
Operation Indicator
Operation Selector
Use to switch between
Light-ON and Dark-ON
Timer switch
ON: Timer function is ON.
OFF: Timer function is OFF.
Operating Procedure
E3X-SD
E3X-NA
1
Sensitivity Setting
The sensitivity can be set with the UP and DOWN Keys similar
to using an adjuster knob. The sensitivity can also be easily
set by using the following two teaching functions.
2-1. Teaching with/without a Workpiece
Two points (one with the workpiece and the other without) are
detected, and the operating level is set to the midpoint.
Light level is also automatically set to the optimal value.
Operation description
Press the TEACH button with the workpiece.
Press the TEACH button without the
workpiece.
Press the TEACH button for 3 s min. Let the
workpiece pass while the button is pressed.
18
Displays
A bar display (with four green and one red) showing excess
gain is provided in addition to the orange operation indicator.
Use these when adjusting the light axis and setting the
sensitivity at setup.
Display/indicator status (for L/ON)
TEACH
TEACH
Excess gain
level
Approx.
120% min.
Stable incident
light
Excess gain level display
Approx.
110% to 120%
Approx.
90% to 110%
Unstable
incident light or
Unstable
interrupted light
Approx.
80% to 90%
Stable
interrupted light
Button/Key
TEACH
Description
Operation indicator
Button/Key
2-2. Automatic Teaching
Changes within a time are detected, and the operating level is
set to the midpoint between the maximum and the minimum
values of the changes. This setting is optimal for when the
workpieces cannot be stopped. Execute automatic teaching
again if the incident light level is not automatically set to the
optimal value.
Operation description
1
Approx.
80% max.
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or
comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING
SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH
PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end
product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED
AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject
to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or
reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in
its entirety.
This document provides information mainly for selecting suitable models. Please read the Instruction sheet carefully for information that the user
must understand and accept before purchase, including information on warranty, limitations of liability, and precautions.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2010 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
CSM_3_1_1010
Cat. No. E401-E1-01
0110