OSRAM Q65110A7341

IR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung
High Power Infrared Emitter (850 nm)
Lead (Pb) Free Product - RoHS Compliant
SFH 4555
Wesentliche Merkmale
Features
• Infrarot LED mit hoher Ausgangsleistung
• Kurze Schaltzeiten
• High Power Infrared LED
• Short switching times
Anwendungen
Applications
• Infrarotbeleuchtung für CMOS Kameras
• Sensorik
• Datenübertragung
• Infrared Illumination for CMOS cameras
• Sensor technology
• Data transmission
Sicherheitshinweise
Safety Advices
Je nach Betriebsart emittieren diese Bauteile
hochkonzentrierte, nicht sichtbare InfrarotStrahlung, die gefährlich für das menschliche
Auge sein kann. Produkte, die diese Bauteile
enthalten, müssen gemäß den Sicherheitsrichtlinien der IEC-Normen 60825-1 und 62471
behandelt werden.
Depending on the mode of operation, these
devices emit highly concentrated non visible
infrared light which can be hazardous to the
human eye. Products which incorporate these
devices have to follow the safety precautions
given in IEC 60825-1 and IEC 62471.
Typ
Type
Bestellnummer
Ordering Code
Strahlstärkegruppierung1) (IF = 100 mA, tp = 20 ms)
Radiant Intensity Grouping1)
Ie (mW/sr)
SFH 4555
Q65110A7341
≥ 160 (typ. 500)
1)
gemessen bei einem Raumwinkel Ω = 0.001 sr / measured at a solid angle of Ω = 0.001 sr
2009-05-14
1
SFH 4555
Grenzwerte (TA = 25 °C)
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
Betriebs- und Lagertemperatur
Operating and storage temperature range
Top , Tstg
– 40 … + 100
°C
Sperrspannung
Reverse voltage
VR
5
V
Vorwärtsgleichstrom
Forward current
IF
100
mA
Stoßstrom, tp = 10 μs, D = 0
Surge current
IFSM
1.5
A
Verlustleistung
Power dissipation
Ptot
180
mW
450
K/W
Wärmewiderstand Sperrschicht - Umgebung bei RthJA
Montage auf FR4 Platine, Padgröße je 16 mm2
Thermal resistance junction - ambient mounted
on PC-board (FR4), padsize 16 mm2 each
Kennwerte (TA = 25 °C)
Characteristics
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
Wellenlänge der Strahlung
Wavelength at peak emission
IF = 100 mA
λpeak
860
nm
Centroid-Wellenlänge der Strahlung
Centroid wavelength
IF = 100 mA
λcentroid
850
nm
Spektrale Bandbreite bei 50% von Imax
Spectral bandwidth at 50% of Imax
IF = 100 mA
Δλ
42
nm
Abstrahlwinkel
Half angle
ϕ
±5
Grad
deg.
Aktive Chipfläche
Active chip area
A
0.09
mm2
Abmessungen der aktiven Chipfläche
Dimension of the active chip area
L×B
L×W
0.3 × 0.3
mm²
2009-05-14
2
SFH 4555
Kennwerte (TA = 25 °C)
Characteristics (cont’d)
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
Schaltzeiten, Ie von 10% auf 90% und von 90%
auf 10%, bei IF = 100 mA, RL = 50 Ω
Switching times, Ιe from 10% to 90% and from
90% to 10%, IF = 100 mA, RL = 50 Ω
tr , tf
12
ns
VF
VF
1.5 (< 1.8)
2.4 (< 3.0)
V
V
Sperrstrom
Reverse current
IR
not designed for μA
reverse
operation
Gesamtstrahlungsfluss
Total radiant flux
IF = 100 mA, tp = 20 ms
Φe typ
50
mW
Temperaturkoeffizient von Ie bzw. Φe,
TCI
IF = 100 mA
Temperature coefficient of Ie or Φe, IF = 100 mA
– 0.5
%/K
Temperaturkoeffizient von VF, IF = 100 mA
Temperature coefficient of VF, IF = 100 mA
TCV
– 0.7
mV/K
Temperaturkoeffizient von λ, IF = 100 mA
Temperature coefficient of λ, IF = 100 mA
TCλ
+ 0.3
nm/K
Durchlassspannung
Forward voltage
IF = 100 mA, tp = 20 ms
IF = 1 A, tp = 100 µs
2009-05-14
3
SFH 4555
Strahlstärke Ie in Achsrichtung1)
gemessen bei einem Raumwinkel Ω = 0.001 sr
Radiant Intensity Ie in Axial Direction
at a solid angle of Ω = 0.001 sr
Bezeichnung
Parameter
Symbol
Werte
Values
Einheit
Unit
SFH 4555
-BW
SFH 4555
-CW
SFH 4555
-DW
Strahlstärke
Ie min
Radiant intensity
Ie max
IF = 100 mA, tp = 20 ms
160
320
250
500
400
800
mW/sr
mW/sr
Strahlstärke
Radiant intensity
IF = 1 A, tp = 100 μs
1500
2000
3000
mW/sr
1)
Ie typ
Nur eine Gruppe in einer Verpackungseinheit (Streuung kleiner 2:1) /
Only one group in one packing unit (variation lower 2:1)
Abstrahlcharakteristik
Radiation Characteristics Irel = f (ϕ)
40˚
30˚
20˚
10˚
0˚
OHF03594
ϕ
50˚
0.8
60˚
0.6
70˚
0.4
80˚
0.2
0
90˚
100˚
1.0
2009-05-14
0.8
0.6
0.4
0˚
20˚
40˚
60˚
80˚
100˚
4
120˚
SFH 4555
Relative Spectral Emission
Irel = f (λ)
Single pulse, tp = 20 μs
OHF04135
100
Ie
= f (IF)
Ie 100 mA
Radiant Intensity
OHL01715
101
100
80
10
OHR00880
125
Ι F mA
Ie
I e (100 mA)
I rel %
Max. Permissible Forward Current
IF = f (TA), RthJA = 450 K/W
0
5
75
60
10-1
5
40
50
10-2
20
0
700
25
5
750
800
nm 950
850
10-3 0
10
5 10 1
5 10 2
λ
Forward Current IF = f (VF)
Single pulse, tp = 20 μs
IF
Permissible Pulse Handling
Capability IF = f (τ), TA = 25 °C,
duty cycle D = parameter
OHL01713
0
10
A
1.6
IF A
1.4
OHF02505
t
5
0.005
0.01
0.02
0.033
0.05
0.1
0.2
0.5
1
0.8
5
0.6
-3
0.4
5
10 -4
IF
T
D=
1.0
10 -2
tP
D = TP
1.2
10 -1
10
mA 10 3
IF
0.2
0
0.5
1
1.5
2
2.5 V 3
VF
0 -5
10 10-4 10-3 10-2 10-1 100 101 s 102
tp
2009-05-14
5
0
0
20
40
60
80 ˚C 100
T
SFH 4555
Maßzeichnung
Package Outlines
Maße in mm (inch) / Dimensions in mm (inch).
Empfohlenes Lötpaddesign
Wellenlöten TTW
Recommended Solder Pad Design
TTW Soldering
4.8 (0.189)
Anode
4 (0.157)
OHLPY985
Maße in mm (inch) / Dimensions in mm (inch).
2009-05-14
6
SFH 4555
Lötbedingungen
Soldering Conditions
Wellenlöten (TTW)
TTW Soldering
(nach CECC 00802)
(acc. to CECC 00802)
OHLY0598
300
C
T
10 s
250
Normalkurve
standard curve
235 C ... 260 C
Grenzkurven
limit curves
2. Welle
2. wave
200
1. Welle
1. wave
150
ca 200 K/s
2 K/s
5 K/s
100 C ... 130 C
100
2 K/s
50
Zwangskühlung
forced cooling
0
0
50
100
150
200
s
250
t
Published by
OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com
© All Rights Reserved.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.
1
A critical component is a component usedin a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2009-05-14
7
Mouser Electronics
Related Product Links
720-SFH4555 - Osram Opto Semiconductor SFH 4555