WWW.PHIHONG.COM 10W Car Charging Adapter for Portable Electronics CLM10D is Compliant with US and EU Vehicle Standards Features High Efficiency Compliant with EU Vehicle Standards Robust Design Battery Charging Applications Portable Electronics Mobile Phones Safety Approvals CE C-Tick FCC E-Mark Mechanical Characteristics Length: 85.28mm (3.36in) Diameter (at cord): 30.48mm (1.2in) Diameter (at tip): 19.3mm (0.76in) Weight: 81.7g (2.88oz) Output Specifications Model DC Output Voltage CLM10D-050(A)-R 5.15V Load Min. 0A Max. 2.0A Ripple P-P (max.) 100mVp-p Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 11/21/2011 CLM10D-050(A) Characteristics Input: AC Input Voltage Range WWW.PHIHONG.COM Reverse Polarity Protection Fuse will blow with no damage to unit 10 to 30V DC (12 Volts Nominal) Input Current Short-Circuit Protection Current limiting without damage to unit ≤30mA at no load (12V Input) ≤1.40A at no load (10V Input) ≤1.44A at no load (30V Input) Environmental: Temperature Output: Output Power 10W Efficiency Operation Non-operation -20 to 60°C -40 to 85°C Operating Humidity 0 to 95% MTBF 80% minimum at maximum load and 12V 100K Hours Minimum at full load and ambient 25°C Rise time: <50mSec. DC Output Connector Input Over-Voltage Fuse will blow with no damage to unit DC Cord Output Over-Voltage By Zener clamping Dimension Diagram Unit: mm [Type text] 2.1mm x 5.5mm x 9mm Center Positive Barrel 1.61 Meters (extended)