https://www.phoenixcontact.com/us/produkte/2744348 D-SUB bus connector - SUBCON-PLUS-PROFIB - 2744348 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) D-SUB connector, 9-pos., male connector, two cable entries < 35°, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; springcage connection terminal blocks The illustration shows the product versions SUBCONPLUS-PROFIB .. and SUBCONPLUS-PROFIB/PG/... Key commercial data Packing unit 1 Minimum order quantity 1 Catalog page Page 162 (AX-2011) GTIN Custom tariff number 85366990 Country of origin GERMANY Technical data Bus system PROFIBUS DP Number of positions, plug 9 Connection type, connector Male Pin assignment 3, 5, 6, 8 General data Nominal voltage UN 50 V Nominal current IN 100 mA Bus system PROFIBUS DP Insertion/withdrawal cycles > 200 Max. cable diameter 8.4 mm Min. cable diameter 7.6 mm SUBCON fixing screws 4-40 UNC Tightening torque 0.4 Nm Ambient temperature (operation) -20 °C ... 75 °C Ambient temperature (storage/transport) -25 °C ... 80 °C 01.02.2013 Page 1 / 5 https://www.phoenixcontact.com/us/produkte/2744348 D-SUB bus connector - SUBCON-PLUS-PROFIB - 2744348 Technical data General data Altitude 5000 m (For restrictions see manufacturer's declaration) Housing material ABS, metal-plated Pin assignment 3, 5, 6, 8 Width 16 mm Height 49.5 mm Length 60 mm Connection data Connection D-SUB connection Number of positions 9 Connection method D-SUB connector Termination resistor 220 Ω (Can be connected externally) Connection PCB connection Connection method Spring-cage connection Termination resistor 390 Ω (Can be connected externally) Conductor cross section solid min. 0.12 mm² Conductor cross section solid max. 0.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 20 Stripping length 5 mm Tightening torque 0.4 Nm Classifications ETIM ETIM 2.0 EC001132 ETIM 3.0 EC001132 ETIM 4.0 EC001132 ETIM 5.0 EC001132 UNSPSC UNSPSC 11 39121402 UNSPSC 12.01 39121402 UNSPSC 13.2 39121402 UNSPSC 6.01 30211802 UNSPSC 7.0901 39121402 eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 01.02.2013 Page 2 / 5 https://www.phoenixcontact.com/us/produkte/2744348 D-SUB bus connector - SUBCON-PLUS-PROFIB - 2744348 Classifications eCl@ss eCl@ss 7.0 27440209 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized cUL Recognized GOST cULus Recognized Accessories Accessories Cable/conductor Cable - PSM-CABLE-PROFIB/FC - 2744652 PROFIBUS cable, Fast Connect type, up to 12 Mbps (02YSY (ST)CY 1x2x22 AWG) 01.02.2013 Page 3 / 5 https://www.phoenixcontact.com/us/produkte/2744348 D-SUB bus connector - SUBCON-PLUS-PROFIB - 2744348 Accessories Plug/Adapter D-SUB bus connector - SUBCON-PLUS-PROFIB/PG/SC2 - 2708245 D-SUB connector, 9-pos., male connector, cable entry < 35°, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB female connector for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks D-SUB bus connector - SUBCON-PLUS-PROFIB/90/PG/IDC - 2313685 D-SUB connector, 9-pos., male connector, cable entry < 90°, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB female connector for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; IDC terminal block connection D-SUB bus connector - SUBCON-PLUS-PROFIB/AX/SC - 2744380 D-SUB connector, 9-pos., male connector, axial version with two cable entries, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks Tools Stripping pliers - QUICK WIREFOX 6 - 1204384 Stripping tool for cables with PVC insulation, stripping range: 0.08 to 6 mm², wire cutting up to 6 mm² flexible or 4 mm² rigid Stripping tool - PSM-STRIP-FC/PROFIB - 2744623 Quick stripping tool for PROFIBUS cable, type Fast Connect 01.02.2013 Page 4 / 5 https://www.phoenixcontact.com/us/produkte/2744348 D-SUB bus connector - SUBCON-PLUS-PROFIB - 2744348 Accessories Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2-component grip, with non-slip grip Screwdriver - SZK PH1 VDE - 1205150 Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip Drawings Dimensioned drawing 16 10 49,5* 44,5 60 35 © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 01.02.2013 Page 5 / 5