05369 DSOT0502 Only One Name Means ProTek’Tion™ LOW CAPACITANCE TVS ARRAY Description The DSOT0502 is a low capacitance transient voltage suppressor array, designed to protect computer interfaces and portable electronics from the damaging effects of Electrostatic Discharge and Electrical Fast Transients. The DSOT0502 meets IEC 61000-4-2 (ESD) and IEC 61000-4-4 (EFT) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device offers a low capacitance and low leakage current in a miniature SOT-883 package. Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • 25 Watts Peak Pulse Power per Line (tp = 8/20µs) • Low Clamping Voltage • Bidirectional Configuration • Low Capacitance • RoHS Compliant • REACH Compliant • SMART Phones • Portable Electronics • Control & Monitoring Systems • Wireless Bus Protection Mechanical characteristics • Molded JEDEC SOT-883 Package • Approximate Weight: 2 milligrams • Lead-Free Nickel Paladium Gold • Solder Reflow Temperature: Nickel-Paladium-Gold: Ni/Pd/Au, 96/3.5/0.5: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 1 2 3 05369.R2 9/12 Page 1 www.protekdevices.com 05369 DSOT0502 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 25 Watts Peak Pulse Power (tp = 8/20µs) - See Figure 1 TA -55 to 150 °C Storage Temperature Operating Temperature TSTG -55 to 150 °C Typical Forward Voltage @10mA, 300µs - Square Wave VF 1.2 V ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DSOT0502 05369.R2 9/12 device marking 5U RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM CLAMPING VOLTAGE (Fig. 2) VWM VOLTS @ 1mA V(BR) VOLTS @I P = 1A VC volts 5.0 6.0 9.8 Page 2 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE @8/20µs VC @ IPP @VWM ID µA @0V, 1MHz C pF 12.5V @ 2A 2 9 www.protekdevices.com 05369 DSOT0502 Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 1,000 100 25W, 8/20µs Waveform 10 1 0.1 1 10 100 td - Pulse Duration - µs IPP - Peak Pulse Current - % of IPP 10,000 figure 2 pulse wave form 120 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t/(IPP/2) 20 0 05369.R2 9/12 1,000 0 5 10 15 t - Time - µs Page 3 20 25 30 www.protekdevices.com 05369 DSOT0502 Only One Name Means ProTek’Tion™ SOT-883 package information outline dimensions dim millimeters inches min max min max A 0.40 0.50 0.016 0.020 A1 0.00 0.03 0.00 0.001 D 0.55 0.65 0.022 0.026 E 0.95 1.05 0.037 0.041 e 0.35 BSC 0.014 BSC e1 0.65 BSC 0.026 BSC b 0.12 0.18 0.005 0.007 b1 0.47 0.53 0.019 0.021 L 0.22 0.28 0.009 0.011 L1 0.22 0.28 0.009 0.011 b Pin 1 Location L E e1 L1 b1 D TOP VIEW BOTTOM VIEW A NOTEs 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: millimeters. 3. Dimensions are exclusive of mold flash and metal burrs. A1 SIDE VIEW A pad layout dimensions millimeters inches nominal nominal A 0.20 0.008 A1 0.20 0.008 B 0.30 0.012 B1 0.30 0.012 C 0.40 0.016 D 0.15 0.006 E 0.55 0.022 F 0.70 0.028 dim A1 B1 C D F B1 E NOTES 1. Controlling dimension: inches. 2. Decimal tolerances for mounting pad: ±0.003” (±0.08 mm). 05369.R2 9/12 Page 4 www.protekdevices.com 05369 DSOT0502 Only One Name Means ProTek’Tion™ TAPE AND REEL D T P2 Top Cover Tape 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 F 5U 5U 5U K0 5U A0 W B0 Pin 1 Location P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 0.70 ± 0.05 1.15 ± 0.10 0.56 ± 0.05 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.05 tmax 0.25 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T75 = 7” Reel - 5,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin 1 designated by line. Package outline, pad layout and tape specifications per document number 06099.R0 5/12. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty DSOT0502 n/a -T75 5,000 7” n/a This device is only available in a Lead-Free configuration. 05369.R2 9/12 Page 5 www.protekdevices.com 05369 DSOT0502 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05369.R2 9/12 Page 6 www.protekdevices.com