iBright ™ E48i T8 LED Tube Family Model HFL-8000N-060600-00 HFL-8000N-120600-00 HFL-8000N-150600-00 Performance Summary Length: 1.96 ft (600 mm), 3.93 ft (1200 mm), 4.92 ft (1500 mm) Power consumption: For more comfortable viewing and brighter lighting, choose iBright™ E48i. iBright™ E48i T8 LED Tubes are the best replacements currently on the market for conventional fluorescent T8 tubes. A frosted lens allows iBright™ E48i to emit light that is very comfortable to the eye in an even pattern of brightness. Lighting is provided by SMD LEDs in large quantities, which allows iBright™ E48i to maintain competitive levels of brightness. iBright™ E48i achieves a high luminous efficacy of min. 95 lm/W at a lower price point by adopting LEDs with high LPW (lumens per watt) as a lighting source, which greatly raises the performance to cost ratio. iBright™ E48i utilizes an external power supply and patented thermal technology to achieve more stable performance and excellent thermal properties. They are well-suited for retail and commercial lighting and are widely used in shopping malls, supermarkets, offices, restaurants, and in other public and professional locales. www.atgelectronics.com Toll free: 877-461-5333 Luminous efficacy: Lumens: 8W± 1W, 17W± 1W, 20W± 1W >95 lm/W 750-800 lm, 1600-1700 lm, 1800-1900 lm CCT: 2800-3200 K 4250-4750 K 5500-6500 K CRI: >75 Recommended Applications General illumination for homes, offices, restaurants, hotels, malls, buses, trains, warehouses, parking lots etc; Task lighting for cabinets, cupboards etc in your homes, restaurants, and kitchens or any other places where accent lighting is required. Retail display lighting for the articles in your stores and shops; Back lighting for square billboards or advertisement boards. Ordering Information Typical Order Example: T8E412L360F000 SERIES GENERATION SIZE VOLTAGE CCT Lens Type OPTION A OPTION B T8=T8 Tube E4=G4 EPS 06=0.6m/2ft 12=1.2m/4ft 15=1.5m/5ft L3=36VDC 30=3000K 45=4500K 60=6000K F=Frosted Lens 0=Default 00=Default Product Specifications CONSTRUCTION & MATERIALS Length Housing Tube Type Base Type Lens Type 1.96 ft (600 mm) 3.93 ft (1200 mm) Extrusion Aluminum and PC Diffuser T8 G13 Frosted 4.92 ft (1500 mm) ENVIRONMENTAL SYSTEM Work Environment Operating Temperature Indoor use (applicable for dry environments) -20~40℃ (-4~104℉) OPTICAL SYSTEM Type 1.96 ft (600 mm) 3.93 ft (1200 mm) Luminous Flux 750-800 lm 1600-1700 lm Luminous Flux (Emergency) * 525-560 lm 1120-1190 lm Color Temperature 2800-3200 K, 4250-4750 K, 5500-6500 K CRI >75 Beam Angle 140° *For more information about emergency application, please check the catalog for ATG Emergency Driver. 4.92 ft (1500 mm) 1800-1900 lm 1080-1140 lm ELECTRICAL SYSTEM Type Power Consumption Input Voltage Frequency Power Factor 1.96 ft (600 mm) 8W± 1W 100-277 VAC 50-60 HZ >0.95 REGULATORY & VOLUNTARY QUALIFICATIONS UL, cUL CE, RoHS UL, cUL, CE listed external power supply www.atgelectronics.com Toll free: 877-461-5333 3.93 ft (1200 mm) 17W± 1W 4.92 ft (1500 mm) 20W± 1W Photometric ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % LUMINAIRE 0-30 284.8 18.30% 18.30% 0-40 472.4 30.40% 30.40% 0-60 875 56.40% 56.40% 60-90 434.1 28% 28% 70-100 338.6 21.80% 21.80% 90-120 183.8 11.80% 11.80% 0-90 1,309.00 84.30% 84.30% 90-180 243.6 15.70% 15.70% 0-180 1,552.60 100% 100% LUMINOUS INTENSITY Gamma C 0° C 45° C 90° C 135° C 180° C 225° C 270° C 315° C 360° 0.0° 233 233 233 233 233 233 233 233 233 15.0° 223 227 230 227 223 224 224 223 223 30.0° 194 209 217 206 195 201 206 198 194 45.0° 148 179 194 173 150 169 180 163 148 60.0° 92 142 166 133 94 131 149 123 92 75.0° 35 106 133 94 38 94 116 83 35 90.0° 2.46 74 101 61 2.38 62 85 51 2.46 ILLUMINANCE AT A DISTANCE CENTER BEAM BEAM SPREAD(FT) FIELD SPREAD(FT) HEIGHT(FT) FOOTCANDLE HORIZONTAL VERTICAL HORIZONTAL 2 90.3 FC 20 5.7 27.4 4 22.6 FC 39.9 11.4 54.8 6 10.0 FC 59.9 17.1 82.2 8 5.6 FC 79.8 22.8 109.6 10 3.6 FC 99.8 28.5 137 BEAM ANGLE 157.3° www.atgelectronics.com Toll free: 877-461-5333 109.9° VERTICAL FIELD ANGLE N/A 163.4° www.atgelectronics.com Toll free: 877-461-5333 USER GUIDE Note: Included in this box Please read this entire manual to fully understand and safety use this product. Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most recent user guide versions. Warning： ATG Electronics iBright™ E48i T8 LED Tube, 1 Pc User Guide, 1 set Accessory Kit, 1 Set, including: -External Power Supply, 1Pc -Wire Nuts, 5 Pcs -Screws, 3 Pcs WARNING – Risk of fire or electric shock. iBright™ E48i T8 LED Tube installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. WARNING – Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings. WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. Lamp replacement instructions shall indicate the manufacturer's custom lamp part number, and a method to order replacement lamps by phone, website and/or mail. These instructions shall be included on an information sheet packaged with each unit. iBright™ E48i T8 LED Tube ONLY work with specific matching external power supplies. Power supplies that do not match specifications will cause the iBright™ E48i to burn out. www.atgelectronics.com Toll free: 877-461-5333 Retrofit Luminaire with Electronic Ballast Before Figure 1 Installation Steps Step 1: Turn off main power before installation For safety, make sure main power source is switched off before attempting to install. Step 2: Remove existing fluorescent light. The existing fluorescent light is not needed and should be recycled as appropriate. Step 3: Open the ballast cover, disconnect all power wires from the ballast, and take the ballast out of the fluorescent luminaire, as shown in Figure 2 below. Keep one wire from each socket to connect to the external power supply. The other wire should be cut off at the socket. Figure 2 Step 4: Install the MATCHING external power supply, as shown in Figure 3 below. The external power supply is sized to match the luminaire and should be installed near the middle of the luminaire using the 3M tape and screws provided. Connect the input wires of the external power supply to the main power outlet. Using wire nuts, connect the output wires of the external power supply to one wire at both of the T8 sockets. Place the existing cover back to protect the external power supply. www.atgelectronics.com Toll free: 877-461-5333 After Figure 3 Step 5: Drop the iBright™ E48i into the fluorescent luminaire. Switch main power on to light it up. Retrofit Luminaire with Magnetic Ballast Before Figure 4 Installation Steps Step 1: Turn off main power before installation For safety, make sure the main power source is switched off before attempting to install. Step 2: Remove existing fluorescent light. The existing fluorescent light is not needed and should be recycled as appropriate. Step 3: Open the ballast cover, disconnect all wires from the ballast, and disconnect the starter from the T8 sockets as shown in Figure 5 below. Remove the ballast from the fluorescent luminaire and recycle it as appropriate. Keep the starter in position. Keep one wire from each socket to connect to the external power supply. The other wire should be cut off at the socket. www.atgelectronics.com Toll free: 877-461-5333 Figure 5 Step 4: Install the MATCHING external power supply as shown in Figure 6 below. The external power supply is sized to match the luminaire and should be installed near the middle of the luminaire with the 3M tape and screws provided. Connect the input wires of the external power supply to the main power outlet. Using wire nuts, connect the output wires of the external power supply to one of wire at both T8 sockets. Place the existing cover back to protect the external power supply. After Figure 6 Step 5: Drop the iBright™ E48i into the fluorescent luminaire. Switch main power on to light it up. www.atgelectronics.com Toll free: 877-461-5333