SF2158E • Filter, 2535 MHz, 70 MHz BW, 2.2 dB Insertion Loss • 3.0 x 3.0 x 1.4 mm Surface-Mount Case 2535.00 MHz SAW Filter Pb • Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units 10 dBm Input Power Level DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 265 °C Maximum Soldering Profile, 5 Cycles/10 seconds Maximum SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency fC 2535 Insertion Loss, 2500 to 2570 MHz IL 2.2 3.6 dB Amplitude Ripple, 2500 to 2570 MHz 0.8 2.2 dB VSWR, 2500 to 2570 MHz 2:1 2.2:1 MHz Attenuation Referenced to 0 dB: DC to 2100 MHz 25 31 2100 to 2400 MHz 27 34.5 2650 to 4000 MHz 30 38 4000 to 5000 MHz 20 23 Case Style dB SM3030-6 3.0 x 3.0 x 1.4 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shift Standard Reel Quantity 822 // YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Port 1 Input Port 2 Output 2 5 Ground All others Dot indicates Pin 1 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 6 SF2158E - 4/21/10 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 6 SF2158E - 4/21/10 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 6 SF2158E - 4/21/10 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 4 of 6 SF2158E - 4/21/10 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free Top View Bottom View B 1 3 6 822 YWWS A 2 5 E 4 D www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 5 of 6 SF2158E - 4/21/10 Tape and Reel Specifications Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 "B" REF. 100 REF. “B” See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 Ao Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 6 of 6 SF2158E - 4/21/10