Preliminary SF2168E • SAW Filter for Digital Television • Complies with Directive 2002/95/EC (RoHS) 1688.42 MHz SAW Filter Pb Characteristics : Balance-to-Balanced Operation Terminating Source/Load Impedance : ZS = 150 Ω Maximum Rating Value Units Input Power Level Rating 0 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 265 °C Maximum Soldering Profile, 5 cycles/ 10 seconds maximum SM3030-8 Electrical Characteristics Characteristic Sym Center Frequency fC 1688.42 ILMAX 4.0 Maximum Insertion Loss, 1668.42 to 1708.42 MHz Notes Min Typ 1.5 dB Passband 62 Amplitude Ripple, 1668.42 to 1708.42 MHz 1.3 Max Units MHz 5.5 dB MHz 1.8 dB Attenuation, Referenced to ILMAX 50 to 1606.36 MHz 45 54 1770.48 to 1800 MHz 38 54 1800 to 2000 MHz 46 49 2000 to 6000 MHz 20 30 Group Delay Ripple, 1668.42 to 1708.42 MHz Case Style 6 20 nsP-P SM3030-8 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity dB 855, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 6 SF2168E - 7/19/10 Filter S11, S22 and S21 Plots Filter Near-in Rejection www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 6 SF2168E - 7/19/10 Filter Broadband Rejection Filter Passband Amplitude and Group Delay Detail www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 6 SF2168E - 7/19/10 Tuning Network, 150 ohm Balanced Source/Load L1, L2 C1, C2, C3, C4 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. 10 nH 10 pF Page 4 of 6 SF2168E - 7/19/10 8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension J J I J K N I A B C D E F G H I J K L M N O L M N mm Nom 3.0 3.0 1.27 0.92 0.75 0.60 0.60 1.20 3.19 0.81 0.96 0.81 1.39 0.23 0.38 Min 2.87 2.87 1.14 0.79 0.62 0.47 0.47 1.07 Max 3.13 3.13 1.40 1.05 0.88 0.73 0.73 1.33 Min 0.113 0.113 0.045 0.031 0.024 0.018 0.018 0.042 Inches Nom 0.118 0.118 0.050 0.036 0.029 0.024 0.024 0.047 0.126 0.032 0.038 0.032 0.055 0.009 0.015 Max 0.123 0.123 0.055 0.041 0.034 0.029 0.029 0.052 Case Materials Materials K O O Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View TOP VIEW BOTTOM VIEW 1 E C B 8 8 7 7 1 6 2 H A 2 6 G 3 5 5 4 4 D www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. 3 F Page 5 of 6 SF2168E - 7/19/10 Tape and Reel Specifications "B" REF. 100 REF. “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 2.0 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 3.35 mm 3.35 mm 1.40 mm 8.0 mm 12.0 mm Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 6 of 6 SF2168E - 7/19/10